ADTRAN-GENETHLBK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
27

adGenEthLbkElementProvTable

table
.1.3.6.1.4.1.664.5.70.50.2.1 · 1 row entry · 3 columns
Open in standard view 
This table is used for provisioning at the element level.
adGenEthLbkElementProvEntry entry .1.3.6.1.4.1.664.5.70.50.2.1.1
An entry in the element provisioning table.
Indexes
adGenEthLbkElementIndex
Column Syntax OID
adGenEthLbkElementIndex
Index used to access an element in the system. While the type is InterfaceIndex,
the value contained refers to an element rather than an interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.70.50.2.1.1.1
adGenEthLbkElementLastFacCreateError
This object contains the error encountered during the last failed
facility loopback creation attempt. A blank string indicates no failure has
occured.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.50.2.1.1.2
adGenEthLbkElementLastTermCreateError
This object contains the error encountered during the last failed
terminal loopback creation attempt. A blank string indicates no failure has
occured.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.50.2.1.1.3

adGenEthLbkFacProvTable

table
.1.3.6.1.4.1.664.5.70.50.2.2 · 1 row entry · 12 columns
Open in standard view 
This table is used for provisioning of a facility Ethernet loopback
In a facility loopback, a flow ingressing the specified MEN port is turned back toward
that MEN port immediately upon entering the switch fabric.  Prior to egress, the source
and destination MAC addresses are swapped.
adGenEthLbkFacProvEntry entry .1.3.6.1.4.1.664.5.70.50.2.2.1
An entry in the facility loopback provisioning table.
Indexes
adGenEthLbkElementIndex adGenEthLbkFacName
Column Syntax OID
adGenEthLbkFacName
Name of the facility Ethernet loopback. This name is unique
amongst all facility loopbacks residing on an element.
OctetString
Constraints:
range: 1-50
 .1.3.6.1.4.1.664.5.70.50.2.2.1.1
adGenEthLbkFacRowStatus
This object is used to create a new loopback or modify or delete an
existing loopback.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.70.50.2.2.1.2
adGenEthLbkFacAdminState
This object is used to control the administrative state of the loopback.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.70.50.2.2.1.3
adGenEthLbkFacRunningStatus
The current status of the loopback. If the status is notRunning(2),
adGenEthLbkFacRunningStatusString will contain the reason.
Enumeration
Enumerated Values:
0disabled
1running
2notRunning
 .1.3.6.1.4.1.664.5.70.50.2.2.1.4
adGenEthLbkFacRunningStatusString
A string representation of the current status. If adGenEthLbkFacRunningStatus
returns notRunning(2), this object will contain the reason it isn't running.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.50.2.2.1.5
adGenEthLbkFacInterface
The interface the loopback is to be applied to. The specified interface must be configured
as an active MEN port, i.e. connected to a running EVC. Traffic ingressing this interface
that matches specified criteria will…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.664.5.70.50.2.2.1.6
adGenEthLbkFacMatchStag
The value of the s-tag used to filter out the loopback traffic. A value of -1 indicates the traffic
isn't being filtered by an s-tag value.
Integer32r/w
Constraints:
range: -1--1
range: 2-4094
 .1.3.6.1.4.1.664.5.70.50.2.2.1.7
adGenEthLbkFacMatchPbit
The value of the p-bit used to filter out the loopback traffic. A value of -1 indicates the traffic
isn't being filtered by a p-bit value.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.664.5.70.50.2.2.1.8
adGenEthLbkFacMatchMACDAExplicit
The value of the destination MAC address used to filter out the loopback traffic. If adGenEthLbkFacMatchMACDAMode
is not set to explicit(1), then the value of this object is meaningless.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.70.50.2.2.1.9
adGenEthLbkFacMatchMACDAMode
This object specifies how/if a specified MAC address is being used as a loopback traffic filter.
none(0) means no MAC address is being used
explicit(1) means the MAC address specified in adGenEthLbkFacMatchMACDAExplicit…
Enumerationr/w
Enumerated Values:
0none
1explicit
2system
 .1.3.6.1.4.1.664.5.70.50.2.2.1.10
adGenEthLbkFacMatchMACSAExplicit
The value of the source MAC address used to filter out the loopback traffic. If adGenEthLbkFacMatchMACSAMode
is not set to explicit(1), then the value of this object is meaningless.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.70.50.2.2.1.11
adGenEthLbkFacMatchMACSAMode
This object specifies how/if a specified MAC address is being used as a loopback traffic filter.
none(0) means no MAC address is being used
explicit(1) means the MAC address specified in adGenEthLbkFacMatchMACSAExplicit…
Enumerationr/w
Enumerated Values:
0none
1explicit
 .1.3.6.1.4.1.664.5.70.50.2.2.1.12

adGenEthLbkTermProvTable

table
.1.3.6.1.4.1.664.5.70.50.2.3 · 1 row entry · 12 columns
Open in standard view 
This table is used for provisioning of a terminal Ethernet loopback
In a terminal loopback, a flow is turned back at the UNI prior to where that flow would otherwise
egress the UNI.  Prior to egress into the MEN, the source and destination MAC addresses are swapped.
adGenEthLbkTermProvEntry entry .1.3.6.1.4.1.664.5.70.50.2.3.1
An entry in the terminal loopback provisioning table.
Indexes
adGenEthLbkElementIndex adGenEthLbkTermName
Column Syntax OID
adGenEthLbkTermName
Name of the terminal Ethernet loopback. This name is unique
amongst all terminal loopbacks residing on an element.
OctetString
Constraints:
range: 1-50
 .1.3.6.1.4.1.664.5.70.50.2.3.1.1
adGenEthLbkTermRowStatus
This object is used to create a new loopback or modify or delete an
existing loopback.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.70.50.2.3.1.2
adGenEthLbkTermAdminState
This object is used to control the administrative state of the loopback.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.664.5.70.50.2.3.1.3
adGenEthLbkTermRunningStatus
The current status of the loopback. If the status is notRunning(2),
adGenEthLbkTermRunningStatusString will contain the reason.
Enumeration
Enumerated Values:
0disabled
1running
2notRunning
 .1.3.6.1.4.1.664.5.70.50.2.3.1.4
adGenEthLbkTermRunningStatusString
A string representation of the current status. If adGenEthLbkTermRunningStatus
returns notRunning(2), this object will contain the reason it isn't running.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.50.2.3.1.5
adGenEthLbkTermInterface
The interface the loopback is to be applied to. The specified interface must be configured
as an active UNI port, i.e. connected to a running EVC-map. Traffic that matches specified criteria
that normally would egress…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.664.5.70.50.2.3.1.6
adGenEthLbkTermMatchStag
The value of the s-tag used to filter out the loopback traffic. A value of -1 indicates the traffic
isn't being filtered by an s-tag value.
Integer32r/w
Constraints:
range: -1--1
range: 2-4094
 .1.3.6.1.4.1.664.5.70.50.2.3.1.7
adGenEthLbkTermMatchPbit
The value of the p-bit used to filter out the loopback traffic. A value of -1 indicates the traffic
isn't being filtered by a p-bit value.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.664.5.70.50.2.3.1.8
adGenEthLbkTermMatchMACDAExplicit
The value of the destination MAC address used to filter out the loopback traffic. If adGenEthLbkTermMatchMACDAMode
is not set to explicit(1), then the value of this object is meaningless.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.70.50.2.3.1.9
adGenEthLbkTermMatchMACDAMode
This object specifies how/if a specified MAC address is being used as a loopback traffic filter.
none(0) means no MAC address is being used
explicit(1) means the MAC address specified in adGenEthLbkTermMatchMACDAExplici…
Enumerationr/w
Enumerated Values:
0none
1explicit
2system
 .1.3.6.1.4.1.664.5.70.50.2.3.1.10
adGenEthLbkTermMatchMACSAExplicit
The value of the source MAC address used to filter out the loopback traffic. If adGenEthLbkTermMatchMACSAMode
is not set to explicit(1), then the value of this object is meaningless.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.664.5.70.50.2.3.1.11
adGenEthLbkTermMatchMACSAMode
This object specifies how/if a specified MAC address is being used as a loopback traffic filter.
none(0) means no MAC address is being used
explicit(1) means the MAC address specified in adGenEthLbkTermMatchMACSAExplici…
Enumerationr/w
Enumerated Values:
0none
1explicit
 .1.3.6.1.4.1.664.5.70.50.2.3.1.12