ADTRAN-GENERIC-OTN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
25
Rows
25
Columns
331

adGenOtnOtuProvTable

table
.1.3.6.1.4.1.664.5.70.44.1.1 · 1 row entry · 19 columns
Open in standard view 
OTU provisioning table.
adGenOtnOtuProvEntry entry .1.3.6.1.4.1.664.5.70.44.1.1.1
Table Entry
Indexes
IF-MIBifIndex
Column Syntax OID
adGenOtnOtuLastError
This OID will return the error string for the last OTU provisioning error.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.44.1.1.1.1
adGenOtnOtuMode
This OID will set the OTU to the specified mode.
Enumerationr/w
Enumerated Values:
1otu1
2otu1e
3otu1f
4otu2
5otu2e
6otu2f
7otu3
8otu3e1
9otu3e2
10otu4
11otu2gfpf
12otu2gfpfs
 .1.3.6.1.4.1.664.5.70.44.1.1.1.2
adGenOtnOtuSupportedModes
This OID indicates the OTU modes that are supported for the indexed
inteface.
A value of 0 indicates the mode is not support.
A value of 1 indicates the mode is support.
The bit positions are:
0 - OTU1
1 - OTU1e
2 - …
Bits
Enumerated Values:
0otu1
1otu1e
2otu1f
3otu2
4otu2e
5otu2f
6otu3
7otu3e1
8otu3e2
9otu4
10otu2gfpf
11otu2gfpfs
 .1.3.6.1.4.1.664.5.70.44.1.1.1.3
adGenOtnOtuDegradeMonitor
This OID indicates the OTU threshold value for the number of consecutive
bad (1 second) intervals before raising the DEG-S alarm.
Integer32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.664.5.70.44.1.1.1.4
adGenOtnOtuDegradeThres
This OID indicates the OTU threshold value for the percentage of errored blocks
within a 1 second interval before raising the DEG-S alarm.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.664.5.70.44.1.1.1.5
adGenOtnOtuTraceTxSapi
This OID will set the Trace Message Transmit SAPI(Source Access Point Identifier)
field.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.1.1.6
adGenOtnOtuTraceTxDapi
This OID will set the Trace Message Transmit DAPI(Destination Access Point Identifier)
field.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.1.1.7
adGenOtnOtuTraceTxOperatorSpec
This OID will set the user provisioned value of the Trace Message Transmit
Operator Specific field. When adGenOtnOtuTraceAutoTxOperatorSpecEnable is disabled,
this string will be transmitted over the fiber.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.664.5.70.44.1.1.1.8
adGenOtnOtuTraceRxSapi
This OID will return the Trace Message Receive SAPI(Source Access Point Identifier)
field.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.1.1.9
adGenOtnOtuTraceRxDapi
This OID will return the Trace Message Receive DAPI(Destination Access Point Identifier)
field.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.1.1.10
adGenOtnOtuTraceRxOperatorSpec
This OID will retrieve the Trace Message Receive Operator Specific field.
If a '@' character is in the first byte, the management system should
consider this field to have been Auto-Generated and therefore,
can parse th…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.664.5.70.44.1.1.1.11
adGenOtnOtuTraceExpectedSapi
This OID will set the Trace Message Expected SAPI(Source Access Point Identifier)
field.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.1.1.12
adGenOtnOtuTraceExpectedDapi
This OID will set the Trace Message Expected DAPI(Destination Access Point Identifier)
field.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.1.1.13
adGenOtnOtuTraceAlarmControl
This OID will control how the TIM(Trace Identifier Mismatch) alarm operates.
Enumerationr/w
Enumerated Values:
1disabled
2sapiOnly
3dapiOnly
4either
 .1.3.6.1.4.1.664.5.70.44.1.1.1.14
adGenOtnOtuTraceInsertAisEnable
This OID controls whether or not AIS is inserted downstream upon detection
of the TIM.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.1.1.1.15
adGenOtnOtuFecType
This OID controls the type Forward Error Correction to use for this OTU interface.
Enumerationr/w
Enumerated Values:
1noFec
2gFec
3eFec
4ufec
 .1.3.6.1.4.1.664.5.70.44.1.1.1.16
adGenOtnOtuSupportedFecType
This OID indicates the OTU FEC types that are supported for the indexed
inteface.
A value of 0 indicates the FEC type is not supported.
A value of 1 indicates the FEC type is supported.
The bit positions are:
0 - no FE…
Bits
Enumerated Values:
0noFec
1gFec
2eFec
3ufec
 .1.3.6.1.4.1.664.5.70.44.1.1.1.17
adGenOtnOtuTraceAutoTxOperatorSpecEnable
This OID controls whether or not the network element automatically generates
the ASCII string for the Operator Specific Transmit Trace message. The
automatically generated string is used by the management system for ne…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.1.1.1.18
adGenOtnOtuTraceTxOperatorSpecActual
This OID will will return the ASCII string that is currently being
transmitted over the fiber.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.664.5.70.44.1.1.1.19

adGenOtnOduProvTable

table
.1.3.6.1.4.1.664.5.70.44.1.2 · 1 row entry · 24 columns
Open in standard view 
OTN ODU Interface provisioning table.  In order
for this table to work as designed, the network
element would need to automatically create the
highest bandwidth ODU path when the OTU level is
created.  For example, if the OTN port is configured
for a OTU2 rate, then the corresponding ODU2 path
would automatically be created.
adGenOtnOduProvEntry entry .1.3.6.1.4.1.664.5.70.44.1.2.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex
Column Syntax OID
adGenOtnOduIndex
This OID will return the ODU interface index.
AdGenOtnOduInterface
Textual Convention: AdGenOtnOduInterface OctetString
Type Constraints:
range: 9
 .1.3.6.1.4.1.664.5.70.44.1.2.1.1
adGenOtnOduLastError
This OID will return the error string for the last ODU provisioning error
for the specified ODU.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.44.1.2.1.2
adGenOtnOduAdminStatus
The desired state of the ODU interface.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.664.5.70.44.1.2.1.3
adGenOtnOduOperStatus
The current operational state of the ODU interface.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.664.5.70.44.1.2.1.4
adGenOtnOduMode
This OID specifies the ODU mode.
Enumerationr/w
Enumerated Values:
1timeslot
2oduFlex
3odu0
4odu1
5odu1e
6odu1f
7odu2
8odu2e
9odu2f
10odu3
11odu3e1
12odu3e2
13odu4
14odu2gfpf
15odu2gfpfs
 .1.3.6.1.4.1.664.5.70.44.1.2.1.5
adGenOtnOduSupportedModes
This OID specifies the ODU mode.
A value of 0 indicates the mode is not support.
A value of 1 indicates the mode is support.
The bit positions are:
0 - timeslots
1 - ODUFlex
2 - ODU0
3 - ODU1
4 - ODU1e
5 - O…
Enumeration
Enumerated Values:
1timeslot
2oduFlex
3odu0
4odu1
5odu1e
6odu1f
7odu2
8odu2e
9odu2f
10odu3
11odu3e1
12odu3e2
13odu4
14odu2gfpf
15odu2gfpfs
 .1.3.6.1.4.1.664.5.70.44.1.2.1.6
adGenOtnOduTimeslotBandwidth
This OID will change the bandwidth of the indexed timeslot. Measured
in increments of 155Mbps.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.664.5.70.44.1.2.1.7
adGenOtnOduRxPayloadLabel
This OID will return the Receive ODU Payload Label overhead byte.
Byte defintions as defined in G.709 Table 15-8 are as follows:
Hex Value Definition
00 Unassigned
01 Experimental mapping…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.664.5.70.44.1.2.1.8
adGenOtnOduTxPayloadLabel
This OID will return the Transmit ODU Payload Label overhead byte.
Byte defintions as defined in G.709 Table 15-8 are as follows:
Hex Value Definition
00 Unassigned
01 Experimental mappin…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.664.5.70.44.1.2.1.9
adGenOtnOduProprietaryPayloadLabel
This OID will set the proprietary payload label. This payload label
value will be used the for TX and expected payload label when carrying
proprietary payload such as Timeslots. This value must fall within the range
o…
Integer32r/w
Constraints:
range: 128-143
 .1.3.6.1.4.1.664.5.70.44.1.2.1.10
adGenOtnOduDegradeMonitor
This OID indicates the ODU threshold value for the number of consecutive
bad (1 second) intervals before declaring the interval bad.
Integer32r/w
Constraints:
range: 2-10
 .1.3.6.1.4.1.664.5.70.44.1.2.1.11
adGenOtnOduDegradeThres
This OID indicates the ODU threshold value for the percentage of errored blocks
within a 1 second interval before declaring the interval bad.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.664.5.70.44.1.2.1.12
adGenOtnOduTraceTxSapi
This OID will set the ODU Trace Message Transmit SAPI(Source Access Point Identifier)
field.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.2.1.13
adGenOtnOduTraceTxDapi
This OID will set the ODU Trace Message Transmit DAPI(Destination Access Point Identifier)
field.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.2.1.14
adGenOtnOduTraceTxOperatorSpec
This OID will set the ODU Trace Message Transmit Operator Specific field.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.664.5.70.44.1.2.1.15
adGenOtnOduTraceRxSapi
This OID will return the ODU Trace Message Receive SAPI(Source Access Point Identifier)
field.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.2.1.16
adGenOtnOduTraceRxDapi
This OID will return the ODU Trace Message Receive DAPI(Destination Access Point Identifier)
field.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.2.1.17
adGenOtnOduTraceRxOperatorSpec
This OID will set the ODU Trace Message Receive Operator Specific field.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.664.5.70.44.1.2.1.18
adGenOtnOduTraceExpectedSapi
This OID will set the ODU Trace Message Expected SAPI(Source Access Point Identifier)
field.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.2.1.19
adGenOtnOduTraceExpectedDapi
This OID will set the ODU Trace Message Expected DAPI(Destination Access Point Identifier)
field.
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.664.5.70.44.1.2.1.20
adGenOtnOduTraceAlarmControl
This OID will control how the ODU TIM alarm operates.
Enumerationr/w
Enumerated Values:
1disabled
2sapiOnly
3dapiOnly
4either
 .1.3.6.1.4.1.664.5.70.44.1.2.1.21
adGenOtnOduTraceInsertAisEnable
This OID controls whether or not AIS is inserted downstream upon detection
of the ODU TIM.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.1.2.1.22
adGenOtnOduRowStatus
Used for creating/deleting ODUs.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.70.44.1.2.1.23
adGenOtnOdu2Odu3AutoPayloadType
Enable/Disable auto payload type generation for ODU2 and
ODU3 interfaces(All other ODU interfaces will return 'unsupported').
When enabled, the network element will automatically chose between
generating payload type 0x…
Enumerationr/w
Enumerated Values:
1unsupported
2enable
3disable
 .1.3.6.1.4.1.664.5.70.44.1.2.1.24

adGenOtnSlotProvTable

table
.1.3.6.1.4.1.664.5.70.44.1.3 · 1 row entry · 2 columns
Open in standard view 
OTN Slot table.  This table is used to handle any
provisioning at the slot level.
adGenOtnSlotProvEntry entry .1.3.6.1.4.1.664.5.70.44.1.3.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenOtnSlotOtuAlarmEnable
This OID controls whether or not an OTU alarm is disabled.
A value of 0 indicates the alarm is disabled.
A value of 1 indicates the alarm is enabled.
The bit positions are:
0 - LOS
1 - LOF-S
2 - LOM-S
3 - AIS-S
4 -…
Bitsr/w
Enumerated Values:
0lossOfSignal
1lossOfFrame
2lossOfMultiFrame
3alarmIndicationSignal
4backwardDefectIndication
5traceIdentifierMismatch
6degradedSignal
 .1.3.6.1.4.1.664.5.70.44.1.3.1.1
adGenOtnSlotOduAlarmEnable
This OID controls whether or not an ODU alarm is disabled.
A value of 0 indicates the alarm is disabled.
A value of 1 indicates the alarm is enabled.
The bit positions are:
0 - LOFLOM-P
1 - BDI-P
2 - OCI-P
3 - TIM-P…
Bitsr/w
Enumerated Values:
0lossOfFrameAndMultiFrame
1backwardDefectIndication
2openConnectionIndication
3traceIdentifierMismatch
4degradedSignal
5payloadLabelMismatch
6lock
7alarmIndicationSignal
8multiplexStructureIdentifierMismatch
9clientSignalFail
10lossOfOpuMultiFrameIdentifier
 .1.3.6.1.4.1.664.5.70.44.1.3.1.2

adGenOtnProtGroupTable

table
.1.3.6.1.4.1.664.5.70.44.1.4 · 1 row entry · 17 columns
Open in standard view 
The OTN Protection Group table.  This table is used
to create protection groups out of two OTN interfaces.
adGenOtnProtGroupEntry entry .1.3.6.1.4.1.664.5.70.44.1.4.1
An entry in the OTN Protection Group table.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnProtGroupName
Column Syntax OID
adGenOtnProtGroupName
Protection Group name.
OctetString
Constraints:
range: 1-50
 .1.3.6.1.4.1.664.5.70.44.1.4.1.1
adGenOtnProtGroupType
Protection Group type.
Enumerationr/w
Enumerated Values:
1snci
2sncn
3yCable
 .1.3.6.1.4.1.664.5.70.44.1.4.1.2
adGenOtnProtGroupWorkingType
This is used to indicate the payload type of the working
entity.
OtnPayloadTypes
Textual Convention: OtnPayloadTypes Enumeration
Type Values:
1notApplicable
2otnPort
3odu4
4odu3
5odu3e1
6odu3e2
7odu2
8odu2e
9odu2f
10odu1e
11odu1f
12odu1
13odu0
14oduflex
15timeslot
 .1.3.6.1.4.1.664.5.70.44.1.4.1.3
adGenOtnProtGroupWorkingInterface
The interface of the working entity.
OtnProtGrpInterfacer/w
Textual Convention: OtnProtGrpInterface OctetString
Type Constraints:
range: 10
 .1.3.6.1.4.1.664.5.70.44.1.4.1.4
adGenOtnProtGroupProtectingType
This is used to indicate the payload type of the protecting
entity.
OtnPayloadTypesr/w
Textual Convention: OtnPayloadTypes Enumeration
Type Values:
1notApplicable
2otnPort
3odu4
4odu3
5odu3e1
6odu3e2
7odu2
8odu2e
9odu2f
10odu1e
11odu1f
12odu1
13odu0
14oduflex
15timeslot
 .1.3.6.1.4.1.664.5.70.44.1.4.1.5
adGenOtnProtGroupProtectingInterface
The interface of the protecting entity.
OtnProtGrpInterfacer/w
Textual Convention: OtnProtGrpInterface OctetString
Type Constraints:
range: 10
 .1.3.6.1.4.1.664.5.70.44.1.4.1.6
adGenOtnProtGroupRowStatus
Protection Group Row Status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.70.44.1.4.1.7
adGenOtnProtGroupLastProvError
This string describes the last error experienced
for this particular entry in the table.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.44.1.4.1.8
adGenOtnProtGroupWorkIsOnline
Indicates whether or not the working-entity is online. If not,
the protect-entity is online.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.1.4.1.9
adGenOtnProtGroupSwitchCommands
Protection Group Switch Commands.
Enumerationr/w
Enumerated Values:
1clear
2manualSwitchToWork
3manualSwitchToProt
4forceSwitchToWork
5forceSwitchToProt
6lockout
 .1.3.6.1.4.1.664.5.70.44.1.4.1.10
adGenOtnProtGroupWorkEntityStatus
Working Entity Signal Status.
Enumeration
Enumerated Values:
1clear
2signalFaulty
3signalDegraded
4down
 .1.3.6.1.4.1.664.5.70.44.1.4.1.11
adGenOtnProtGroupProtectEntityStatus
Protect Entity Signal Status.
Enumeration
Enumerated Values:
1clear
2signalFaulty
3signalDegraded
4down
 .1.3.6.1.4.1.664.5.70.44.1.4.1.12
adGenOtnProtGroupRevertiveEnable
Enables/disables revertive switching for this protection group.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.1.4.1.13
adGenOtnProtGroupWaitToRestoreTime
Wait to restore time(in minutes).
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.664.5.70.44.1.4.1.14
adGenOtnProtGroupOperStatus
Operation Status of the Protection Group. This operational status
indicates whether or not the provisioning necessary for protection switching
to function properly has been adequately provisioned. It is not affected b…
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.664.5.70.44.1.4.1.15
adGenOtnProtGroupStatusString
The status string for the protection group. Indicates
why the protection group is down. If protection group is up,
then a blank string will be returned.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.44.1.4.1.16
adGenOtnProtGroupWaitToRestoreRemainingTime
The remaining time(in seconds) to restore the entity when wait to restore is enabled.
secondsUnsigned32
Constraints:
range: 0-1200
 .1.3.6.1.4.1.664.5.70.44.1.4.1.17

adGenOtnProtGroupLastCreateErrorTable

table
.1.3.6.1.4.1.664.5.70.44.1.5 · 1 row entry · 1 columns
Open in standard view 
The OTN Protection Group Last Create Error table.
This table is used to indicate the last error that occurred
during creation of a protection group.
adGenOtnProtGroupLastCreateErrorEntry entry .1.3.6.1.4.1.664.5.70.44.1.5.1
An entry in the OTN Protection Group Last Create Error table.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenOtnProtGroupLastCreateError
The last error that occurred during the creation of a
protection group.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.44.1.5.1.1

adGenOtnOtuStatusTable

table
.1.3.6.1.4.1.664.5.70.44.2.1 · 1 row entry · 1 columns
Open in standard view 
OTN OTU Interface status table.
adGenOtnOtuStatusEntry entry .1.3.6.1.4.1.664.5.70.44.2.1.1
Table Entry
Indexes
IF-MIBifIndex
Column Syntax OID
adGenOtnOtuAlarmStatus
A bit-map representing the current alarm status of the specified
OTU port.
The bit positions are:
0 - LOS
1 - LOF-S
2 - LOM-S
3 - AIS-S
4 - BDI-S
5 - TIM-S
6 - DEG-S
7 - TIM-S with Consequence(AIS Insertion)
Bits
Enumerated Values:
0lossOfSignal
1lossOfFrame
2lossOfMultiFrame
3alarmIndicationSignal
4backwardDefectIndication
5traceIdentifierMismatch
6degradedSignal
7traceIdentifierMismatchWithConsequence
 .1.3.6.1.4.1.664.5.70.44.2.1.1.1

adGenOtnOduStatusTable

table
.1.3.6.1.4.1.664.5.70.44.2.2 · 1 row entry · 3 columns
Open in standard view 
OTN ODU Interface status table.
adGenOtnOduStatusEntry entry .1.3.6.1.4.1.664.5.70.44.2.2.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex
Column Syntax OID
adGenOtnOduAlarmStatus
A bit-map representing the current alarm status of the specified
ODU path.
The bit positions are:
0 - LOFLOM-P
1 - BDI-P
2 - OCI-P
3 - TIM-P
4 - DEG-P
5 - PLM-P
6 - LCK-P
7 - AIS-P
8 - MSIM-P
9 - TIM…
Bits
Enumerated Values:
0lossOfFrameAndMultiFrame
1backwardDefectIndication
2openConnectionIndication
3traceIdentifierMismatch
4degradedSignal
5payloadLabelMismatch
6lock
7alarmIndicationSignal
8multiplexStructureIdentifierMismatch
9traceIdentifierMismatchWithConsequence
10clientSignalFail
11lossOfOpuMultiFrameIdentifier
 .1.3.6.1.4.1.664.5.70.44.2.2.1.1
adGenOtnOduStatus
ODU status.
The bit positions are:
0 - this interface is in fault
1 - at least one superordinate interface or equipment is in fault
2 - at least one subordinate interface is in fault
3 - superordinate interface or e…
Bits
Enumerated Values:
0fault
1superordinateFault
2subordinateFault
3superordinateUnassigned
4subordinateInserviceOrMaintenance
5protected
6superordinateProtected
7subordinateProtected
8mapped
9superordinateMapped
10subordinateMapped
11crossconnected
12superordinateCrossConnected
13subordinateCrossConnected
 .1.3.6.1.4.1.664.5.70.44.2.2.1.2
adGenOtnOduProtGrpName
The name of the protection group for this ODU. If this ODU is not part of a
protection group, this field will be blank.
OctetString
Constraints:
range: 1-50
 .1.3.6.1.4.1.664.5.70.44.2.2.1.3

adGenOtnOduCrossConnectStatusTable

table
.1.3.6.1.4.1.664.5.70.44.2.3 · 1 row entry · 2 columns
Open in standard view 
The OTN ODU Cross-Connect Status table.
adGenOtnOduCrossConnectStatusEntry entry .1.3.6.1.4.1.664.5.70.44.2.3.1
An entry in the OTN ODU Cross-Connect Status table.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex adGenOtnOduCrossConnectName
Column Syntax OID
adGenOtnOduCrossConnectName
Name of Cross-Connect.
OctetString
Constraints:
range: 1-50
 .1.3.6.1.4.1.664.5.70.44.2.3.1.1
adGenOtnOduCrossConnectStatus
This OID indicates whether this ODU is defined as a source, destination or both for
this cross-connect.
Enumeration
Enumerated Values:
1source
2destination
3sourceAndDestination
 .1.3.6.1.4.1.664.5.70.44.2.3.1.2

adGenOtnOduMappingStatusTable

table
.1.3.6.1.4.1.664.5.70.44.2.4 · 1 row entry · 2 columns
Open in standard view 
The OTN ODU Mapping Status table.
adGenOtnOduMappingStatusEntry entry .1.3.6.1.4.1.664.5.70.44.2.4.1
An entry in the OTN ODU Mapping Status table.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex adGenOtnOduMappingName
Column Syntax OID
adGenOtnOduMappingName
Name of Mapping.
OctetString
Constraints:
range: 1-50
 .1.3.6.1.4.1.664.5.70.44.2.4.1.1
adGenOtnOduMappingStatus
This OID indicates whether this ODU is defined as a source, destination or both for
this mapping.
Enumeration
Enumerated Values:
1source
2destination
3sourceAndDestination
 .1.3.6.1.4.1.664.5.70.44.2.4.1.2

adGenOtnOtuPmThres15MinTable

table
.1.3.6.1.4.1.664.5.70.44.3.1 · 1 row entry · 21 columns
Open in standard view 
OTU Performance Montitoring Threshold Provisioning 15-Minute table.
adGenOtnOtuPmThres15MinEntry entry .1.3.6.1.4.1.664.5.70.44.3.1.1
Table Entry
Indexes
IF-MIBifIndex
Column Syntax OID
adGenOtnOtuPmThres15MinNeEB
OTU Performance Monitoring Threshold for 15-Minute Near-End Errored Blocks.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 700000
OTU3 - 0 to 270000
OTU2 - 0 to 70000
OTU1 - 0 to 17500
Integer32r/w
Constraints:
range: 0-700000
 .1.3.6.1.4.1.664.5.70.44.3.1.1.1
adGenOtnOtuPmThres15MinNeBBE
OTU Performance Monitoring Threshold for 15-Minute Near-End Background Block Errors.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 700000
OTU3 - 0 to 270000
OTU2 - 0 to 70000
OTU1 - 0 to 17500
Integer32r/w
Constraints:
range: 0-700000
 .1.3.6.1.4.1.664.5.70.44.3.1.1.2
adGenOtnOtuPmThres15MinNeBBER
OTU Performance Monitoring Threshold for 15-Minute Near-End Background Block Error Ratio.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.1.1.3
adGenOtnOtuPmThres15MinNeES
OTU Performance Monitoring Threshold for 15-Minute Near-End Errored Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.1.1.4
adGenOtnOtuPmThres15MinNeSES
OTU Performance Monitoring Threshold for 15-Minute Near-End Severely Errored Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.1.1.5
adGenOtnOtuPmThres15MinNeESR
OTU Performance Monitoring Threshold for 15-Minute Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OI…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.1.1.6
adGenOtnOtuPmThres15MinNeSESR
OTU Performance Monitoring Threshold for 15-Minute Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 …
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.1.1.7
adGenOtnOtuPmThres15MinNeUAS
OTU Performance Monitoring Threshold for 15-Minute Near-End Unavailable Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.1.1.8
adGenOtnOtuPmThres15MinFeEB
OTU Performance Monitoring Threshold for 15-Minute Far-End Errored Blocks.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 700000
OTU3 - 0 to 270000
OTU2 - 0 to 70000
OTU1 - 0 to 17500
Integer32r/w
Constraints:
range: 0-700000
 .1.3.6.1.4.1.664.5.70.44.3.1.1.9
adGenOtnOtuPmThres15MinFeBBE
OTU Performance Monitoring Threshold for 15-Minute Far-End Background Block Errors.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 700000
OTU3 - 0 to 270000
OTU2 - 0 to 70000
OTU1 - 0 to 17500
Integer32r/w
Constraints:
range: 0-700000
 .1.3.6.1.4.1.664.5.70.44.3.1.1.10
adGenOtnOtuPmThres15MinFeBBER
OTU Performance Monitoring Threshold for 15-Minute Far-End Background Block Error Ratio.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.1.1.11
adGenOtnOtuPmThres15MinFeES
OTU Performance Monitoring Threshold for 15-Minute Far-End Errored Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.1.1.12
adGenOtnOtuPmThres15MinFeSES
OTU Performance Monitoring Threshold for 15-Minute Far-End Severely Errored Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.1.1.13
adGenOtnOtuPmThres15MinFeESR
OTU Performance Monitoring Threshold for 15-Minute Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.1.1.14
adGenOtnOtuPmThres15MinFeSESR
OTU Performance Monitoring Threshold for 15-Minute Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 f…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.1.1.15
adGenOtnOtuPmThres15MinFeUAS
OTU Performance Monitoring Threshold for 15-Minute Far-End Unavailable Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.1.1.16
adGenOtnOtuPmThres15MinFecCorrBits
OTU Performance Monitoring Threshold for 15-Minute FEC (Forward Error Correction)
Corrected Bits.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 100000000000
OTU3 - 0 to 40000000000
OTU2 - 0 to 10…
APPLICATION-MIBUnsigned64TCr/w
Textual Convention: APPLICATION-MIBUnsigned64TC Unsigned64
 .1.3.6.1.4.1.664.5.70.44.3.1.1.17
adGenOtnOtuPmThres15MinFecCorrOnes
OTU Performance Monitoring Threshold for 15-Minute FEC (Forward Error Correction)
Corrected Ones.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 100000000000
OTU3 - 0 to 40000000000
OTU2 - 0 to 10…
APPLICATION-MIBUnsigned64TCr/w
Textual Convention: APPLICATION-MIBUnsigned64TC Unsigned64
 .1.3.6.1.4.1.664.5.70.44.3.1.1.18
adGenOtnOtuPmThres15MinFecCorrZeros
OTU Performance Monitoring Threshold for 15-Minute FEC (Forward Error Correction)
Corrected Zeros.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 100000000000
OTU3 - 0 to 40000000000
OTU2 - 0 to 1…
APPLICATION-MIBUnsigned64TCr/w
Textual Convention: APPLICATION-MIBUnsigned64TC Unsigned64
 .1.3.6.1.4.1.664.5.70.44.3.1.1.19
adGenOtnOtuPmThres15MinFecUnCorrBlks
OTU Performance Monitoring Threshold for 15-Minute FEC (Forward Error Correction)
Uncorrected Blocks.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 100000000000
OTU3 - 0 to 40000000000
OTU2 - 0 to…
APPLICATION-MIBUnsigned64TCr/w
Textual Convention: APPLICATION-MIBUnsigned64TC Unsigned64
 .1.3.6.1.4.1.664.5.70.44.3.1.1.20
adGenOtnOtuPmThres15MinFecCorrBer
OTU Performance Monitoring Threshold for 15-Minute FEC (Forward Error Correction)
Corrected Bit Error Rate.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.1.1.21

adGenOtnOtuPmThres24HrTable

table
.1.3.6.1.4.1.664.5.70.44.3.2 · 1 row entry · 21 columns
Open in standard view 
OTU Performance Montitoring Threshold Provisioning 24-Hour table.
adGenOtnOtuPmThres24HrEntry entry .1.3.6.1.4.1.664.5.70.44.3.2.1
Table Entry
Indexes
IF-MIBifIndex
Column Syntax OID
adGenOtnOtuPmThres24HrNeEB
OTU Performance Monitoring Threshold for 24-Hour Near-End Errored Blocks.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 70000000
OTU3 - 0 to 28000000
OTU2 - 0 to 7000000
OTU1 - 0 to 1750000
Integer32r/w
Constraints:
range: 0-70000000
 .1.3.6.1.4.1.664.5.70.44.3.2.1.1
adGenOtnOtuPmThres24HrNeBBE
OTU Performance Monitoring Threshold for 24-Hour Near-End Background Block Errors.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 70000000
OTU3 - 0 to 28000000
OTU2 - 0 to 7000000
OTU1 - 0 to 1750…
Integer32r/w
Constraints:
range: 0-70000000
 .1.3.6.1.4.1.664.5.70.44.3.2.1.2
adGenOtnOtuPmThres24HrNeBBER
OTU Performance Monitoring Threshold for 24-Hour Near-End Background Block Error Ratio.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.2.1.3
adGenOtnOtuPmThres24HrNeES
OTU Performance Monitoring Threshold for 24-Hour Near-End Errored Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.2.1.4
adGenOtnOtuPmThres24HrNeSES
OTU Performance Monitoring Threshold for 24-Hour Near-End Severely Errored Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.2.1.5
adGenOtnOtuPmThres24HrNeESR
OTU Performance Monitoring Threshold for 24-Hour Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.2.1.6
adGenOtnOtuPmThres24HrNeSESR
OTU Performance Monitoring Threshold for 24-Hour Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 fo…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.2.1.7
adGenOtnOtuPmThres24HrNeUAS
OTU Performance Monitoring Threshold for 24-Hour Near-End Unavailable Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.2.1.8
adGenOtnOtuPmThres24HrFeEB
OTU Performance Monitoring Threshold for 24-Hour Far-End Errored Blocks.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 70000000
OTU3 - 0 to 28000000
OTU2 - 0 to 7000000
OTU1 - 0 to 1750000
Integer32r/w
Constraints:
range: 0-70000000
 .1.3.6.1.4.1.664.5.70.44.3.2.1.9
adGenOtnOtuPmThres24HrFeBBE
OTU Performance Monitoring Threshold for 24-Hour Far-End Background Block Errors.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 70000000
OTU3 - 0 to 28000000
OTU2 - 0 to 7000000
OTU1 - 0 to 17500…
Integer32r/w
Constraints:
range: 0-70000000
 .1.3.6.1.4.1.664.5.70.44.3.2.1.10
adGenOtnOtuPmThres24HrFeBBER
OTU Performance Monitoring Threshold for 24-Hour Far-End Background Block Error Ratio.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.2.1.11
adGenOtnOtuPmThres24HrFeES
OTU Performance Monitoring Threshold for 24-Hour Far-End Errored Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.2.1.12
adGenOtnOtuPmThres24HrFeSES
OTU Performance Monitoring Threshold for 24-Hour Far-End Severely Errored Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.2.1.13
adGenOtnOtuPmThres24HrFeESR
OTU Performance Monitoring Threshold for 24-Hour Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.2.1.14
adGenOtnOtuPmThres24HrFeSESR
OTU Performance Monitoring Threshold for 24-Hour Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 for…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.2.1.15
adGenOtnOtuPmThres24HrFeUAS
OTU Performance Monitoring Threshold for 24-Hour Far-End Unavailable Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.2.1.16
adGenOtnOtuPmThres24HrFecCorrBits
OTU Performance Monitoring Threshold for 24-Hour FEC (Forward Error Correction)
Corrected Bits.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 10000000000000
OTU3 - 0 to 4000000000000
OTU2 - 0 to …
APPLICATION-MIBUnsigned64TCr/w
Textual Convention: APPLICATION-MIBUnsigned64TC Unsigned64
 .1.3.6.1.4.1.664.5.70.44.3.2.1.17
adGenOtnOtuPmThres24HrFecCorrOnes
OTU Performance Monitoring Threshold for 24-Hour FEC (Forward Error Correction)
Corrected Ones.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 10000000000000
OTU3 - 0 to 4000000000000
OTU2 - 0 to …
APPLICATION-MIBUnsigned64TCr/w
Textual Convention: APPLICATION-MIBUnsigned64TC Unsigned64
 .1.3.6.1.4.1.664.5.70.44.3.2.1.18
adGenOtnOtuPmThres24HrFecCorrZeros
OTU Performance Monitoring Threshold for 24-Hour FEC (Forward Error Correction)
Corrected Zeros.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 10000000000000
OTU3 - 0 to 4000000000000
OTU2 - 0 to …
APPLICATION-MIBUnsigned64TCr/w
Textual Convention: APPLICATION-MIBUnsigned64TC Unsigned64
 .1.3.6.1.4.1.664.5.70.44.3.2.1.19
adGenOtnOtuPmThres24HrFecUnCorrBlks
OTU Performance Monitoring Threshold for 24-Hour FEC (Forward Error Correction)
Uncorrected Blocks.
Threshold range can vary depending OTU Mode as follows:
OTU4 - 0 to 10000000000000
OTU3 - 0 to 4000000000000
OTU2 - 0 …
APPLICATION-MIBUnsigned64TCr/w
Textual Convention: APPLICATION-MIBUnsigned64TC Unsigned64
 .1.3.6.1.4.1.664.5.70.44.3.2.1.20
adGenOtnOtuPmThres24HrFecCorrBer
OTU Performance Monitoring Threshold for 24-Hour FEC (Forward Error Correction)
Corrected Bit Error Rate.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.2.1.21

adGenOtnOduPmThres15MinTable

table
.1.3.6.1.4.1.664.5.70.44.3.3 · 1 row entry · 16 columns
Open in standard view 
ODU Performance Montitoring Threshold Provisioning 15-Minute table.
adGenOtnOduPmThres15MinEntry entry .1.3.6.1.4.1.664.5.70.44.3.3.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex
Column Syntax OID
adGenOtnOduPmThres15MinNeEB
ODU Performance Monitoring Threshold for 15-Minute Near-End Errored Blocks.
Threshold range can vary depending ODU Bandwidth Type as follows:
ODU4 - 0 to 700000
ODU3 - 0 to 280000
ODU2 - 0 to 70000
ODU1 - 0 to 1750
O…
Integer32r/w
Constraints:
range: 0-700000
 .1.3.6.1.4.1.664.5.70.44.3.3.1.1
adGenOtnOduPmThres15MinNeBBE
ODU Performance Monitoring Threshold for 15-Minute Near-End Background Block Errors.
Threshold range can vary depending ODU Bandwidth Type as follows:
ODU4 - 0 to 700000
ODU3 - 0 to 280000
ODU2 - 0 to 70000
ODU1 - 0 to…
Integer32r/w
Constraints:
range: 0-700000
 .1.3.6.1.4.1.664.5.70.44.3.3.1.2
adGenOtnOduPmThres15MinNeBBER
ODU Performance Monitoring Threshold for 15-Minute Near-End Background Block Error Ratio.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.3.1.3
adGenOtnOduPmThres15MinNeES
ODU Performance Monitoring Threshold for 15-Minute Near-End Errored Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.3.1.4
adGenOtnOduPmThres15MinNeSES
ODU Performance Monitoring Threshold for 15-Minute Near-End Severely Errored Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.3.1.5
adGenOtnOduPmThres15MinNeESR
ODU Performance Monitoring Threshold for 15-Minute Near-End Severely Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 fo…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.3.1.6
adGenOtnOduPmThres15MinNeSESR
ODU Performance Monitoring Threshold for 15-Minute Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 …
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.3.1.7
adGenOtnOduPmThres15MinNeUAS
ODU Performance Monitoring Threshold for 15-Minute Near-End Unavailable Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.3.1.8
adGenOtnOduPmThres15MinFeEB
ODU Performance Monitoring Threshold for 15-Minute Far-End Errored Blocks.
Threshold range can vary depending ODU Bandwidth Type as follows:
ODU4 - 0 to 700000
ODU3 - 0 to 280000
ODU2 - 0 to 70000
ODU1 - 0 to 1750
OD…
Integer32r/w
Constraints:
range: 0-700000
 .1.3.6.1.4.1.664.5.70.44.3.3.1.9
adGenOtnOduPmThres15MinFeBBE
ODU Performance Monitoring Threshold for 15-Minute Far-End Background Block Errors.
Threshold range can vary depending ODU Bandwidth Type as follows:
ODU4 - 0 to 700000
ODU3 - 0 to 280000
ODU2 - 0 to 70000
ODU1 - 0 to …
Integer32r/w
Constraints:
range: 0-700000
 .1.3.6.1.4.1.664.5.70.44.3.3.1.10
adGenOtnOduPmThres15MinFeBBER
ODU Performance Monitoring Threshold for 15-Minute Far-End Background Block Error Ratio.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.3.1.11
adGenOtnOduPmThres15MinFeES
ODU Performance Monitoring Threshold for 15-Minute Far-End Errored Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.3.1.12
adGenOtnOduPmThres15MinFeSES
ODU Performance Monitoring Threshold for 15-Minute Far-End Severely Errored Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.3.1.13
adGenOtnOduPmThres15MinFeESR
ODU Performance Monitoring Threshold for 15-Minute Far-End Severely Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.3.1.14
adGenOtnOduPmThres15MinFeSESR
ODU Performance Monitoring Threshold for 15-Minute Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 f…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.3.1.15
adGenOtnOduPmThres15MinFeUAS
ODU Performance Monitoring Threshold for 15-Minute Far-End Unavailable Seconds.
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.664.5.70.44.3.3.1.16

adGenOtnOduPmThres24HrTable

table
.1.3.6.1.4.1.664.5.70.44.3.4 · 1 row entry · 16 columns
Open in standard view 
ODU Performance Montitoring Threshold Provisioning 24-Hour table.
adGenOtnOduPmThres24HrEntry entry .1.3.6.1.4.1.664.5.70.44.3.4.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex
Column Syntax OID
adGenOtnOduPmThres24HrNeEB
ODU Performance Monitoring Threshold for 15-Minute Near-End Errored Blocks.
Threshold range can vary depending ODU Bandwidth Type as follows:
ODU4 - 0 to 70000000
ODU3 - 0 to 28000000
ODU2 - 0 to 7000000
ODU1 - 0 to …
Integer32r/w
Constraints:
range: 0-70000000
 .1.3.6.1.4.1.664.5.70.44.3.4.1.1
adGenOtnOduPmThres24HrNeBBE
ODU Performance Monitoring Threshold for 24-Hour Near-End Background Block Errors.
Threshold range can vary depending ODU Bandwidth Type as follows:
ODU4 - 0 to 70000000
ODU3 - 0 to 28000000
ODU2 - 0 to 7000000
ODU1 - …
Integer32r/w
Constraints:
range: 0-70000000
 .1.3.6.1.4.1.664.5.70.44.3.4.1.2
adGenOtnOduPmThres24HrNeBBER
ODU Performance Monitoring Threshold for 24-Hour Near-End Background Block Error Ratio.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.4.1.3
adGenOtnOduPmThres24HrNeES
ODU Performance Monitoring Threshold for 24-Hour Near-End Errored Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.4.1.4
adGenOtnOduPmThres24HrNeSES
ODU Performance Monitoring Threshold for 24-Hour Near-End Severely Errored Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.4.1.5
adGenOtnOduPmThres24HrNeESR
ODU Performance Monitoring Threshold for 24-Hour Near-End Severely Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for …
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.4.1.6
adGenOtnOduPmThres24HrNeSESR
ODU Performance Monitoring Threshold for 24-Hour Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 fo…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.4.1.7
adGenOtnOduPmThres24HrNeUAS
ODU Performance Monitoring Threshold for 24-Hour Near-End Unavailable Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.4.1.8
adGenOtnOduPmThres24HrFeEB
ODU Performance Monitoring Threshold for 24-Hour Far-End Errored Blocks.
Threshold range can vary depending ODU Bandwidth Type as follows:
ODU4 - 0 to 70000000
ODU3 - 0 to 28000000
ODU2 - 0 to 7000000
ODU1 - 0 to 175…
Integer32r/w
Constraints:
range: 0-70000000
 .1.3.6.1.4.1.664.5.70.44.3.4.1.9
adGenOtnOduPmThres24HrFeBBE
ODU Performance Monitoring Threshold for 24-Hour Far-End Background Block Errors.
Threshold range can vary depending ODU Bandwidth Type as follows:
ODU4 - 0 to 70000000
ODU3 - 0 to 28000000
ODU2 - 0 to 7000000
ODU1 - 0…
Integer32r/w
Constraints:
range: 0-70000000
 .1.3.6.1.4.1.664.5.70.44.3.4.1.10
adGenOtnOduPmThres24HrFeBBER
ODU Performance Monitoring Threshold for 24-Hour Far-End Background Block Error Ratio.
Enumerationr/w
Enumerated Values:
1disable
2oneExpMinusThree
3oneExpMinusFour
4oneExpMinusFive
5oneExpMinusSix
6oneExpMinusSeven
7oneExpMinusEight
8oneExpMinusNine
9oneExpMinusTen
 .1.3.6.1.4.1.664.5.70.44.3.4.1.11
adGenOtnOduPmThres24HrFeES
ODU Performance Monitoring Threshold for 24-Hour Far-End Errored Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.4.1.12
adGenOtnOduPmThres24HrFeSES
ODU Performance Monitoring Threshold for 24-Hour Far-End Severely Errored Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.4.1.13
adGenOtnOduPmThres24HrFeESR
ODU Performance Monitoring Threshold for 24-Hour Far-End Severely Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for t…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.4.1.14
adGenOtnOduPmThres24HrFeSESR
ODU Performance Monitoring Threshold for 24-Hour Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 for…
Integer32r/w
Constraints:
range: 0-999
 .1.3.6.1.4.1.664.5.70.44.3.4.1.15
adGenOtnOduPmThres24HrFeUAS
ODU Performance Monitoring Threshold for 24-Hour Far-End Unavailable Seconds.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.664.5.70.44.3.4.1.16

adGenOtnOtuPm15MinCurrentTable

table
.1.3.6.1.4.1.664.5.70.44.4.1 · 1 row entry · 21 columns
Open in standard view 
OTU Performance Montitoring 15-Minute Current table.
adGenOtnOtuPm15MinCurrentEntry entry .1.3.6.1.4.1.664.5.70.44.4.1.1
Table Entry
Indexes
IF-MIBifIndex
Column Syntax OID
adGenOtnOtuPm15MinCurrentNeEB
OTU Performance Monitoring for 15-Minute Current Near-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.1
adGenOtnOtuPm15MinCurrentNeBBE
OTU Performance Monitoring for 15-Minute Current Near-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.2
adGenOtnOtuPm15MinCurrentNeBBER
OTU Performance Monitoring for 15-Minute Current Near-End Background Block Error Ratio.
The BBER decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.1.1.3
adGenOtnOtuPm15MinCurrentNeES
OTU Performance Monitoring for 15-Minute Current Near-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.4
adGenOtnOtuPm15MinCurrentNeSES
OTU Performance Monitoring for 15-Minute Current Near-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.5
adGenOtnOtuPm15MinCurrentNeESR
OTU Performance Monitoring for 15-Minute Current Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.6
adGenOtnOtuPm15MinCurrentNeSESR
OTU Performance Monitoring for 15-Minute Current Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 fo…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.7
adGenOtnOtuPm15MinCurrentNeUAS
OTU Performance Monitoring for 15-Minute Current Near-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.8
adGenOtnOtuPm15MinCurrentFeEB
OTU Performance Monitoring for 15-Minute Current Far-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.9
adGenOtnOtuPm15MinCurrentFeBBE
OTU Performance Monitoring for 15-Minute Current Far-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.10
adGenOtnOtuPm15MinCurrentFeBBER
OTU Performance Monitoring for 15-Minute Current Far-End Background Block Error Ratio.
The BBER decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.1.1.11
adGenOtnOtuPm15MinCurrentFeES
OTU Performance Monitoring for 15-Minute Current Far-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.12
adGenOtnOtuPm15MinCurrentFeSES
OTU Performance Monitoring for 15-Minute Current Far-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.13
adGenOtnOtuPm15MinCurrentFeESR
OTU Performance Monitoring for 15-Minute Current Far-End Severely Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.14
adGenOtnOtuPm15MinCurrentFeSESR
OTU Performance Monitoring for 15-Minute Current Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 for…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.15
adGenOtnOtuPm15MinCurrentFeUAS
OTU Performance Monitoring for 15-Minute Current Far-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.1.1.16
adGenOtnOtuPm15MinCurrentFecCorrBits
OTU Performance Monitoring for 15-Minute Current FEC (Forward Error Correction)
Corrected Bits.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.1.1.17
adGenOtnOtuPm15MinCurrentFecCorrOnes
OTU Performance Monitoring for 15-Minute Current FEC (Forward Error Correction)
Corrected Ones.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.1.1.18
adGenOtnOtuPm15MinCurrentFecCorrZeros
OTU Performance Monitoring for 15-Minute Current FEC (Forward Error Correction)
Corrected Zeros.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.1.1.19
adGenOtnOtuPm15MinCurrentFecUnCorrBlks
OTU Performance Monitoring for 15-Minute Current FEC (Forward Error Correction)
Uncorrected Blocks.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.1.1.20
adGenOtnOtuPm15MinCurrentFecCorrBer
OTU Performance Monitoring for 15-Minute Current FEC (Forward Error Correction)
Corrected Bit Error Rate. FEC-CORR-BER is a decimal value between 0 and 1 calculated
out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.1.1.21

adGenOtnOtuPm15MinIntervalTable

table
.1.3.6.1.4.1.664.5.70.44.4.2 · 1 row entry · 24 columns
Open in standard view 
OTU Performance Montitoring 15-Minute Interval table.
adGenOtnOtuPm15MinIntervalEntry entry .1.3.6.1.4.1.664.5.70.44.4.2.1
Table Entry
Indexes
IF-MIBifIndex adGenOtnOtuPm15MinInterval
Column Syntax OID
adGenOtnOtuPm15MinInterval
A number between 1 and 96, which identifies the interval for which the set
of statistics is available. The interval identified by 1 is the most recently
completed 15 minute interval, and the interval identified by N is …
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.664.5.70.44.4.2.1.1
adGenOtnOtuPm15MinIntervalNeEB
OTU Performance Monitoring for 15-Minute Interval Near-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.2
adGenOtnOtuPm15MinIntervalNeBBE
OTU Performance Monitoring for 15-Minute Interval Near-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.3
adGenOtnOtuPm15MinIntervalNeBBER
OTU Performance Monitoring for 15-Minute Interval Near-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.2.1.4
adGenOtnOtuPm15MinIntervalNeES
OTU Performance Monitoring for 15-Minute Interval Near-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.5
adGenOtnOtuPm15MinIntervalNeSES
OTU Performance Monitoring for 15-Minute Interval Near-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.6
adGenOtnOtuPm15MinIntervalNeESR
OTU Performance Monitoring for 15-Minute Interval Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.7
adGenOtnOtuPm15MinIntervalNeSESR
OTU Performance Monitoring for 15-Minute Interval Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.8
adGenOtnOtuPm15MinIntervalNeUAS
OTU Performance Monitoring for 15-Minute Interval Near-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.9
adGenOtnOtuPm15MinIntervalFeEB
OTU Performance Monitoring for 15-Minute Interval Far-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.10
adGenOtnOtuPm15MinIntervalFeBBE
OTU Performance Monitoring for 15-Minute Interval Far-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.11
adGenOtnOtuPm15MinIntervalFeBBER
OTU Performance Monitoring for 15-Minute Interval Far-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.2.1.12
adGenOtnOtuPm15MinIntervalFeES
OTU Performance Monitoring for 15-Minute Interval Far-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.13
adGenOtnOtuPm15MinIntervalFeSES
OTU Performance Monitoring for 15-Minute Interval Far-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.14
adGenOtnOtuPm15MinIntervalFeESR
OTU Performance Monitoring for 15-Minute Interval Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.15
adGenOtnOtuPm15MinIntervalFeSESR
OTU Performance Monitoring for 15-Minute Interval Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.16
adGenOtnOtuPm15MinIntervalFeUAS
OTU Performance Monitoring for 15-Minute Interval Far-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.2.1.17
adGenOtnOtuPm15MinIntervalFecCorrBits
OTU Performance Monitoring for 15-Minute Interval FEC (Forward Error Correction)
Corrected Bits.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.2.1.18
adGenOtnOtuPm15MinIntervalFecCorrOnes
OTU Performance Monitoring for 15-Minute Interval FEC (Forward Error Correction)
Corrected Ones.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.2.1.19
adGenOtnOtuPm15MinIntervalFecCorrZeros
OTU Performance Monitoring for 15-Minute Interval FEC (Forward Error Correction)
Corrected Zeros.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.2.1.20
adGenOtnOtuPm15MinIntervalFecUnCorrBlks
OTU Performance Monitoring for 15-Minute Interval FEC (Forward Error Correction)
Uncorrected Blocks.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.2.1.21
adGenOtnOtuPm15MinIntervalFecCorrBer
OTU Performance Monitoring for 15-Minute Interval FEC (Forward Error Correction)
Corrected Bit Error Rate. FEC-CORR-BER is a decimal value between 0 and 1 calculated
out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.2.1.22
adGenOtnOtuPm15MinIntervalNeValidData
This variable indicates if the data for this
near end 15 minute interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.4.2.1.23
adGenOtnOtuPm15MinIntervalFeValidData
This variable indicates if the data for this
far end 15 minute interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.4.2.1.24

adGenOtnOtuPm24HrCurrentTable

table
.1.3.6.1.4.1.664.5.70.44.4.3 · 1 row entry · 21 columns
Open in standard view 
OTU Performance Montitoring 24-Hour Current table.
adGenOtnOtuPm24HrCurrentEntry entry .1.3.6.1.4.1.664.5.70.44.4.3.1
Table Entry
Indexes
IF-MIBifIndex
Column Syntax OID
adGenOtnOtuPm24HrCurrentNeEB
OTU Performance Monitoring for 24-Hour Current Near-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.1
adGenOtnOtuPm24HrCurrentNeBBE
OTU Performance Monitoring for 24-Hour Current Near-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.2
adGenOtnOtuPm24HrCurrentNeBBER
OTU Performance Monitoring for 24-Hour Current Near-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.3.1.3
adGenOtnOtuPm24HrCurrentNeES
OTU Performance Monitoring for 24-Hour Current Near-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.4
adGenOtnOtuPm24HrCurrentNeSES
OTU Performance Monitoring for 24-Hour Current Near-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.5
adGenOtnOtuPm24HrCurrentNeESR
OTU Performance Monitoring Threshold for 24-Hour Current Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.6
adGenOtnOtuPm24HrCurrentNeSESR
OTU Performance Monitoring for 24-Hour Current Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for th…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.7
adGenOtnOtuPm24HrCurrentNeUAS
OTU Performance Monitoring for 24-Hour Current Near-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.8
adGenOtnOtuPm24HrCurrentFeEB
OTU Performance Monitoring for 24-Hour Current Far-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.9
adGenOtnOtuPm24HrCurrentFeBBE
OTU Performance Monitoring for 24-Hour Current Far-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.10
adGenOtnOtuPm24HrCurrentFeBBER
OTU Performance Monitoring for 24-Hour Current Far-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.3.1.11
adGenOtnOtuPm24HrCurrentFeES
OTU Performance Monitoring for 24-Hour Current Far-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.12
adGenOtnOtuPm24HrCurrentFeSES
OTU Performance Monitoring for 24-Hour Current Far-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.13
adGenOtnOtuPm24HrCurrentFeESR
OTU Performance Monitoring Threshold for 24-Hour Current Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for th…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.14
adGenOtnOtuPm24HrCurrentFeSESR
OTU Performance Monitoring for 24-Hour Current Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
SESR value is multiplied by 1000 for t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.15
adGenOtnOtuPm24HrCurrentFeUAS
OTU Performance Monitoring for 24-Hour Current Far-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.3.1.16
adGenOtnOtuPm24HrCurrentFecCorrBits
OTU Performance Monitoring for 24-Hour Current FEC (Forward Error Correction)
Corrected Bits.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.3.1.17
adGenOtnOtuPm24HrCurrentFecCorrOnes
OTU Performance Monitoring for 24-Hour Current FEC (Forward Error Correction)
Corrected Ones.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.3.1.18
adGenOtnOtuPm24HrCurrentFecCorrZeros
OTU Performance Monitoring for 24-Hour Current FEC (Forward Error Correction)
Corrected Zeros.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.3.1.19
adGenOtnOtuPm24HrCurrentFecUnCorrBlks
OTU Performance Monitoring for 24-Hour Current FEC (Forward Error Correction)
Uncorrected Blocks.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.3.1.20
adGenOtnOtuPm24HrCurrentFecCorrBer
OTU Performance Monitoring for 24-Hour Current FEC (Forward Error Correction)
Corrected Bit Error Ratio. FEC-CORR-BER is a decimal value between 0 and 1 calculated
out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.3.1.21

adGenOtnOtuPm24HrIntervalTable

table
.1.3.6.1.4.1.664.5.70.44.4.4 · 1 row entry · 24 columns
Open in standard view 
OTU Performance Montitoring 24-Hour Interval table.
adGenOtnOtuPm24HrIntervalEntry entry .1.3.6.1.4.1.664.5.70.44.4.4.1
Table Entry
Indexes
IF-MIBifIndex adGenOtnOtuPm24HrInterval
Column Syntax OID
adGenOtnOtuPm24HrInterval
A number between 1 and 7, which identifies the daily interval for which
the set of statistics is available. The interval identified by 1 is the
most recently completed 24 hour interval, and the interval identified by
N…
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.664.5.70.44.4.4.1.1
adGenOtnOtuPm24HrIntervalNeEB
OTU Performance Monitoring for 24-Hour Interval Near-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.2
adGenOtnOtuPm24HrIntervalNeBBE
OTU Performance Monitoring for 24-Hour Interval Near-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.3
adGenOtnOtuPm24HrIntervalNeBBER
OTU Performance Monitoring for 24-Hour Interval Near-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.4.1.4
adGenOtnOtuPm24HrIntervalNeES
OTU Performance Monitoring for 24-Hour Interval Near-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.5
adGenOtnOtuPm24HrIntervalNeSES
OTU Performance Monitoring for 24-Hour Interval Near-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.6
adGenOtnOtuPm24HrIntervalNeESR
OTU Performance Monitoring Threshold for 24-Hour Interval Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.7
adGenOtnOtuPm24HrIntervalNeSESR
OTU Performance Monitoring for 24-Hour Interval Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.8
adGenOtnOtuPm24HrIntervalNeUAS
OTU Performance Monitoring for 24-Hour Interval Near-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.9
adGenOtnOtuPm24HrIntervalFeEB
OTU Performance Monitoring for 24-Hour Interval Far-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.10
adGenOtnOtuPm24HrIntervalFeBBE
OTU Performance Monitoring for 24-Hour Interval Far-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.11
adGenOtnOtuPm24HrIntervalFeBBER
OTU Performance Monitoring for 24-Hour Interval Far-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.44.4.4.1.12
adGenOtnOtuPm24HrIntervalFeES
OTU Performance Monitoring for 24-Hour Interval Far-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.13
adGenOtnOtuPm24HrIntervalFeSES
OTU Performance Monitoring for 24-Hour Interval Far-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.14
adGenOtnOtuPm24HrIntervalFeESR
OTU Performance Monitoring Threshold for 24-Hour Interval Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.15
adGenOtnOtuPm24HrIntervalFeSESR
OTU Performance Monitoring for 24-Hour Interval Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for th…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.16
adGenOtnOtuPm24HrIntervalFeUAS
OTU Performance Monitoring for 24-Hour Interval Far-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.4.1.17
adGenOtnOtuPm24HrIntervalFecCorrBits
OTU Performance Monitoring for 24-Hour Interval FEC (Forward Error Correction)
Corrected Bits.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.4.1.18
adGenOtnOtuPm24HrIntervalFecCorrOnes
OTU Performance Monitoring for 24-Hour Interval FEC (Forward Error Correction)
Corrected Ones.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.4.1.19
adGenOtnOtuPm24HrIntervalFecCorrZeros
OTU Performance Monitoring for 24-Hour Interval FEC (Forward Error Correction)
Corrected Zeros.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.4.1.20
adGenOtnOtuPm24HrIntervalFecUnCorrBlks
OTU Performance Monitoring for 24-Hour Interval FEC (Forward Error Correction)
Uncorrected Blocks.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.4.1.21
adGenOtnOtuPm24HrIntervalFecCorrBer
OTU Performance Monitoring for 24-Hour Interval FEC (Forward Error Correction)
Corrected Bit Error Ratio. FEC-CORR-BER is a decimal value between 0 and 1 calculated
out to as many as 10 decimal place.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.44.4.4.1.22
adGenOtnOtuPm24HrIntervalNeValidData
This variable indicates if the data for this
near end 24 hour interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.4.4.1.23
adGenOtnOtuPm24HrIntervalFeValidData
This variable indicates if the data for this
far end 24 hour interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.4.4.1.24

adGenOtnOduPm15MinCurrentTable

table
.1.3.6.1.4.1.664.5.70.44.4.5 · 1 row entry · 16 columns
Open in standard view 
ODU Performance Montitoring 15-Minute Current table.
adGenOtnOduPm15MinCurrentEntry entry .1.3.6.1.4.1.664.5.70.44.4.5.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex
Column Syntax OID
adGenOtnOduPm15MinCurrentNeEB
ODU Performance Monitoring for 15-Minute Current Near-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.1
adGenOtnOduPm15MinCurrentNeBBE
ODU Performance Monitoring for 15-Minute Current Near-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.2
adGenOtnOduPm15MinCurrentNeBBER
ODU Performance Monitoring for 15-Minute Current Near-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.5.1.3
adGenOtnOduPm15MinCurrentNeES
ODU Performance Monitoring for 15-Minute Current Near-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.4
adGenOtnOduPm15MinCurrentNeSES
ODU Performance Monitoring for 15-Minute Current Near-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.5
adGenOtnOduPm15MinCurrentNeESR
ODU Performance Monitoring for 15-Minute Current Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.6
adGenOtnOduPm15MinCurrentNeSESR
ODU Performance Monitoring for 15-Minute Current Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.7
adGenOtnOduPm15MinCurrentNeUAS
ODU Performance Monitoring for 15-Minute Current Near-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.8
adGenOtnOduPm15MinCurrentFeEB
ODU Performance Monitoring for 15-Minute Current Far-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.9
adGenOtnOduPm15MinCurrentFeBBE
ODU Performance Monitoring for 15-Minute Current Far-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.10
adGenOtnOduPm15MinCurrentFeBBER
ODU Performance Monitoring for 15-Minute Current Far-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.5.1.11
adGenOtnOduPm15MinCurrentFeES
ODU Performance Monitoring for 15-Minute Current Far-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.12
adGenOtnOduPm15MinCurrentFeSES
ODU Performance Monitoring for 15-Minute Current Far-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.13
adGenOtnOduPm15MinCurrentFeESR
ODU Performance Monitoring for 15-Minute Current Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.14
adGenOtnOduPm15MinCurrentFeSESR
ODU Performance Monitoring for 15-Minute Current Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.15
adGenOtnOduPm15MinCurrentFeUAS
ODU Performance Monitoring for 15-Minute Current Far-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.5.1.16

adGenOtnOduPm15MinIntervalTable

table
.1.3.6.1.4.1.664.5.70.44.4.6 · 1 row entry · 19 columns
Open in standard view 
ODU Performance Montitoring 15-Minute Interval table.
adGenOtnOduPm15MinIntervalEntry entry .1.3.6.1.4.1.664.5.70.44.4.6.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex adGenOtnOduPm15MinInterval
Column Syntax OID
adGenOtnOduPm15MinInterval
A number between 1 and 96, which identifies the interval for which the set
of statistics is available. The interval identified by 1 is the most recently
completed 15 minute interval, and the interval identified by N is …
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.664.5.70.44.4.6.1.1
adGenOtnOduPm15MinIntervalNeEB
ODU Performance Monitoring for 15-Minute Interval Near-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.2
adGenOtnOduPm15MinIntervalNeBBE
ODU Performance Monitoring for 15-Minute Interval Near-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.3
adGenOtnOduPm15MinIntervalNeBBER
ODU Performance Monitoring for 15-Minute Interval Near-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.70.44.4.6.1.4
adGenOtnOduPm15MinIntervalNeES
ODU Performance Monitoring for 15-Minute Interval Near-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.5
adGenOtnOduPm15MinIntervalNeSES
ODU Performance Monitoring for 15-Minute Interval Near-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.6
adGenOtnOduPm15MinIntervalNeESR
ODU Performance Monitoring for 15-Minute Interval Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.7
adGenOtnOduPm15MinIntervalNeSESR
ODU Performance Monitoring for 15-Minute Interval Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.8
adGenOtnOduPm15MinIntervalNeUAS
ODU Performance Monitoring for 15-Minute Interval Near-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.9
adGenOtnOduPm15MinIntervalFeEB
ODU Performance Monitoring for 15-Minute Interval Far-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.10
adGenOtnOduPm15MinIntervalFeBBE
ODU Performance Monitoring for 15-Minute Interval Far-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.11
adGenOtnOduPm15MinIntervalFeBBER
ODU Performance Monitoring for 15-Minute Interval Far-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.6.1.12
adGenOtnOduPm15MinIntervalFeES
ODU Performance Monitoring for 15-Minute Interval Far-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.13
adGenOtnOduPm15MinIntervalFeSES
ODU Performance Monitoring for 15-Minute Interval Far-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.14
adGenOtnOduPm15MinIntervalFeESR
ODU Performance Monitoring for 15-Minute Interval Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.15
adGenOtnOduPm15MinIntervalFeSESR
ODU Performance Monitoring for 15-Minute Interval Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.16
adGenOtnOduPm15MinIntervalFeUAS
ODU Performance Monitoring for 15-Minute Interval Far-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.6.1.17
adGenOtnOduPm15MinIntervalNeValidData
This variable indicates if the data for this
near end 15 minute interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.4.6.1.18
adGenOtnOduPm15MinIntervalFeValidData
This variable indicates if the data for this
far end 15 minute interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.4.6.1.19

adGenOtnOduPm24HrCurrentTable

table
.1.3.6.1.4.1.664.5.70.44.4.7 · 1 row entry · 16 columns
Open in standard view 
ODU Performance Montitoring 24-Hour Current table.
adGenOtnOduPm24HrCurrentEntry entry .1.3.6.1.4.1.664.5.70.44.4.7.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex
Column Syntax OID
adGenOtnOduPm24HrCurrentNeEB
ODU Performance Monitoring for 24-Hour Current Near-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.1
adGenOtnOduPm24HrCurrentNeBBE
ODU Performance Monitoring for 24-Hour Current Near-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.2
adGenOtnOduPm24HrCurrentNeBBER
ODU Performance Monitoring for 24-Hour Current Near-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.7.1.3
adGenOtnOduPm24HrCurrentNeES
ODU Performance Monitoring for 24-Hour Current Near-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.4
adGenOtnOduPm24HrCurrentNeSES
ODU Performance Monitoring for 24-Hour Current Near-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.5
adGenOtnOduPm24HrCurrentNeESR
ODU Performance Monitoring for 24-Hour Current Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.6
adGenOtnOduPm24HrCurrentNeSESR
ODU Performance Monitoring for 24-Hour Current Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for th…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.7
adGenOtnOduPm24HrCurrentNeUAS
ODU Performance Monitoring for 24-Hour Current Near-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.8
adGenOtnOduPm24HrCurrentFeEB
ODU Performance Monitoring for 24-Hour Current Far-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.9
adGenOtnOduPm24HrCurrentFeBBE
ODU Performance Monitoring for 24-Hour Current Far-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.10
adGenOtnOduPm24HrCurrentFeBBER
ODU Performance Monitoring for 24-Hour Current Far-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.7.1.11
adGenOtnOduPm24HrCurrentFeES
ODU Performance Monitoring for 24-Hour Current Far-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.12
adGenOtnOduPm24HrCurrentFeSES
ODU Performance Monitoring for 24-Hour Current Far-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.13
adGenOtnOduPm24HrCurrentFeESR
ODU Performance Monitoring for 24-Hour Current Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.14
adGenOtnOduPm24HrCurrentFeSESR
ODU Performance Monitoring for 24-Hour Current Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for thi…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.15
adGenOtnOduPm24HrCurrentFeUAS
ODU Performance Monitoring for 24-Hour Current Far-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.7.1.16

adGenOtnOduPm24HrIntervalTable

table
.1.3.6.1.4.1.664.5.70.44.4.8 · 1 row entry · 19 columns
Open in standard view 
ODU Performance Montitoring 24-Hour Interval table.
adGenOtnOduPm24HrIntervalEntry entry .1.3.6.1.4.1.664.5.70.44.4.8.1
Table Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex adGenOtnOduPm24HrInterval
Column Syntax OID
adGenOtnOduPm24HrInterval
A number between 1 and 7, which identifies the daily interval for which
the set of statistics is available. The interval identified by 1 is the
most recently completed 24 hour interval, and the interval identified by
N…
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.664.5.70.44.4.8.1.1
adGenOtnOduPm24HrIntervalNeEB
ODU Performance Monitoring for 24-Hour Interval Near-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.2
adGenOtnOduPm24HrIntervalNeBBE
ODU Performance Monitoring for 24-Hour Interval Near-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.3
adGenOtnOduPm24HrIntervalNeBBER
ODU Performance Monitoring for 24-Hour Interval Near-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.8.1.4
adGenOtnOduPm24HrIntervalNeES
ODU Performance Monitoring for 24-Hour Interval Near-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.5
adGenOtnOduPm24HrIntervalNeSES
ODU Performance Monitoring for 24-Hour Interval Near-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.6
adGenOtnOduPm24HrIntervalNeESR
ODU Performance Monitoring for 24-Hour Interval Near-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.7
adGenOtnOduPm24HrIntervalNeSESR
ODU Performance Monitoring for 24-Hour Interval Near-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for t…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.8
adGenOtnOduPm24HrIntervalNeUAS
ODU Performance Monitoring for 24-Hour Interval Near-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.9
adGenOtnOduPm24HrIntervalFeEB
ODU Performance Monitoring for 24-Hour Interval Far-End Errored Blocks.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.10
adGenOtnOduPm24HrIntervalFeBBE
ODU Performance Monitoring for 24-Hour Interval Far-End Background Block Errors.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.11
adGenOtnOduPm24HrIntervalFeBBER
ODU Performance Monitoring for 24-Hour Interval Far-End Background Block Error Ratio.
BBER is a decimal value between 0 and 1 calculated out to as many as 10 decimal place.
OctetString
Constraints:
range: 0-13
 .1.3.6.1.4.1.664.5.70.44.4.8.1.12
adGenOtnOduPm24HrIntervalFeES
ODU Performance Monitoring for 24-Hour Interval Far-End Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.13
adGenOtnOduPm24HrIntervalFeSES
ODU Performance Monitoring for 24-Hour Interval Far-End Severely Errored Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.14
adGenOtnOduPm24HrIntervalFeESR
ODU Performance Monitoring for 24-Hour Interval Far-End Errored Second Ratio.
ESR is a decimal number between 0 and 0.999. In order to not deal with a decimal number, the
ESR value is multiplied by 1000 for this OID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.15
adGenOtnOduPm24HrIntervalFeSESR
ODU Performance Monitoring for 24-Hour Interval Far-End Severely Errored Second Ratio.
SESR is a decimal number between 0 and 0.99. In order to not deal with a decimal number, the
SESR value is multiplied by 100 for th…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.16
adGenOtnOduPm24HrIntervalFeUAS
ODU Performance Monitoring for 24-Hour Interval Far-End Unavailable Seconds.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.70.44.4.8.1.17
adGenOtnOduPm24HrIntervalNeValidData
This variable indicates if the data for this
near end 24 hour interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.4.8.1.18
adGenOtnOduPm24HrIntervalFeValidData
This variable indicates if the data for this
far end 24 hour interval is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.664.5.70.44.4.8.1.19

adGenOtnOtuCountersTable

table
.1.3.6.1.4.1.664.5.70.44.4.9 · 1 row entry · 12 columns
Open in standard view 
The OTN running counters table.
adGenOtnOtuCountersEntry entry .1.3.6.1.4.1.664.5.70.44.4.9.1
An entry in the OTN OTU Entry
Indexes
IF-MIBifIndex
Column Syntax OID
adGenOtnOtuCounterNeEB
The counter associated with the number of Near End Errored blocks
encountered by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.1
adGenOtnOtuCounterNeBBE
The counter associated with the number of Near End Background Block Errors
encountered by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.2
adGenOtnOtuCounterNeES
The counter associated with the number of Near End Errored Seconds
encountered by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.3
adGenOtnOtuCounterNeSES
The counter associated with the number of Near End Severely Errored Seconds
encountered by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.4
adGenOtnOtuCounterNeUAS
The counter associated with the number of Near End Unavailable Seconds encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.5
adGenOtnOtuCounterFeEB
The counter associated with the number of Far End Errored blocks encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.6
adGenOtnOtuCounterFeBBE
The counter associated with the number of Far End Background Block Errors encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.7
adGenOtnOtuCounterFeES
The counter associated with the number of Far End Errored Seconds encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.8
adGenOtnOtuCounterFeSES
The counter associated with the number of Far End Severely Errored Seconds encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.9
adGenOtnOtuCounterFeUAS
The counter associated with the number of Far End Unavailable Seconds encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.10
adGenOtnOtuCounterFecCorrBits
The counter associated with the number of Far End Fec corrected Bits encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.11
adGenOtnOtuCounterFecUnCorrBlks
The counter associated with the number of Far End Fec Uncorrected Blocks encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.9.1.12

adGenOtnOduCountersTable

table
.1.3.6.1.4.1.664.5.70.44.4.10 · 1 row entry · 10 columns
Open in standard view 
The OTN ODU running counters table.
adGenOtnOduCountersEntry entry .1.3.6.1.4.1.664.5.70.44.4.10.1
An entry in the OTN ODU Running Counters Entry
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenOtnOduIndex
Column Syntax OID
adGenOtnOduCounterNeEB
The counter associated with the number of Near End Errored blocks encountered by
an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.1
adGenOtnOduCounterNeBBE
The counter associated with the number of Near End Background Block Errors encountered
by an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.2
adGenOtnOduCounterNeES
The counter associated with the number of Near End Errored Seconds encountered
by an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.3
adGenOtnOduCounterNeSES
The counter associated with the number of Near End Severely Errored Seconds encountered
by an OTN OTU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.4
adGenOtnOduCounterNeUAS
The counter associated with the number of Near End Unavailable Seconds encountered
by an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.5
adGenOtnOduCounterFeEB
The counter associated with the number of Far End Errored blocks encountered
by an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.6
adGenOtnOduCounterFeBBE
The counter associated with the number of Far End Background Block Errors encountered
by an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.7
adGenOtnOduCounterFeES
The counter associated with the number of Far End Errored Seconds encountered
by an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.8
adGenOtnOduCounterFeSES
The counter associated with the number of Far End Severely Errored Seconds
encountered by an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.9
adGenOtnOduCounterFeUAS
The counter associated with the number of Far End Unavailable Seconds encountered
by an OTN ODU interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.664.5.70.44.4.10.1.10

adGenOtnPmInterfaceTable

table
.1.3.6.1.4.1.664.5.70.44.5.1 · 1 row entry · 3 columns
Open in standard view 
The Generic OTN PM interface table
adGenOtnPmInterfaceEntry entry .1.3.6.1.4.1.664.5.70.44.5.1.1
An entry in the OTN PM interface table
Indexes
IF-MIBifIndex
Column Syntax OID
adGenOtnPmInterface15MinValidIntervals
It displays the number of completed quarter hourly (15-minute) bins per interface.
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.664.5.70.44.5.1.1.1
adGenOtnPmInterface24HrValidIntervals
It displays the number of completed daily (24-hour) bins per interface.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.664.5.70.44.5.1.1.2
adGenOtnPmInterfaceResetPM
Reset all OTN PM counts per interface.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.70.44.5.1.1.3

adGenOtnPmSlotTable

table
.1.3.6.1.4.1.664.5.70.44.6.1 · 1 row entry · 1 columns
Open in standard view 
The OTN PM Slot Table
adGenOtnPmSlotEntry entry .1.3.6.1.4.1.664.5.70.44.6.1.1
An entry in the OTN PM Slot Table
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenOtnPmResetAllPMData
Reset all OTN PM counts per slot.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.664.5.70.44.6.1.1.1