ADTRAN-GEN-DSL-PROXY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
19

adGenDslProxyCommandTable

table
.1.3.6.1.4.1.664.5.59.4.1.1 · 1 row entry · 12 columns
Open in standard view 
This table controls intitiating DSL proxy commands and
determining the status of those commands.
adGenDslProxyCommandEntry entry .1.3.6.1.4.1.664.5.59.4.1.1.1
An entry in the adGenDslProxyCommandTable. Each entry
is indexed by the ifIndex of the T1 interface to which
the remote HDSL span is attached.
Indexes
IF-MIBifIndex
Column Syntax OID
adGenDslProxySystemTypeInitiate
Discover whether an Adtran HDSLx LTU is at the other end of
the T1 line, and if so report information about the span.
AdGenDslProxyInitiater/w
Textual Convention: AdGenDslProxyInitiate Enumeration
Type Values:
1initiate
 .1.3.6.1.4.1.664.5.59.4.1.1.1.1
adGenDslProxySystemTypeStatus
Status of Retrieve System Type command. When the results
are available, they may be retrieved from adGenDslProxySystemTable.
AdGenDslProxyStatus
Textual Convention: AdGenDslProxyStatus Enumeration
Type Values:
1neverActivated
2inProgress
3resultsValid
4error
 .1.3.6.1.4.1.664.5.59.4.1.1.1.2
adGenDslProxySystemTypeLastTime
Timestamp of last valid results for Retrieve System Type command.
AdGenDslProxyLastTime
Textual Convention: AdGenDslProxyLastTime Unsigned32
 .1.3.6.1.4.1.664.5.59.4.1.1.1.3
adGenDslProxyLoopbackStatusInitiate
Retrieve the loopback status of all units in the span.
AdGenDslProxyInitiater/w
Textual Convention: AdGenDslProxyInitiate Enumeration
Type Values:
1initiate
 .1.3.6.1.4.1.664.5.59.4.1.1.1.4
adGenDslProxyLoopbackStatusStatus
Status of Retrieve Loopback Status command. When the results
are available, they may be retrieved from adGenDslProxyLoopbackTable.
AdGenDslProxyStatus
Textual Convention: AdGenDslProxyStatus Enumeration
Type Values:
1neverActivated
2inProgress
3resultsValid
4error
 .1.3.6.1.4.1.664.5.59.4.1.1.1.5
adGenDslProxyLoopbackStatusLastTime
Timestamp of last valid results for Retrieve Loopback Status command.
AdGenDslProxyLastTime
Textual Convention: AdGenDslProxyLastTime Unsigned32
 .1.3.6.1.4.1.664.5.59.4.1.1.1.6
adGenDslProxySpliceDetectInitiate
Retrieve splice detection data from all units in the span.
AdGenDslProxyInitiater/w
Textual Convention: AdGenDslProxyInitiate Enumeration
Type Values:
1initiate
 .1.3.6.1.4.1.664.5.59.4.1.1.1.7
adGenDslProxySpliceDetectStatus
Status of Retrieve Splice Detection command. When the results
are available, they may be retrieved from adEShdslSpliceDetectionTable.
AdGenDslProxyStatus
Textual Convention: AdGenDslProxyStatus Enumeration
Type Values:
1neverActivated
2inProgress
3resultsValid
4error
 .1.3.6.1.4.1.664.5.59.4.1.1.1.8
adGenDslProxySpliceDetectLastTime
Timestamp of last valid results for Retrieve Splice Detection command.
AdGenDslProxyLastTime
Textual Convention: AdGenDslProxyLastTime Unsigned32
 .1.3.6.1.4.1.664.5.59.4.1.1.1.9
adGenDslProxyFrameGroundInitiate
Activate Frame Ground Detection Test on the remote LTU and
retrieve results.
AdGenDslProxyInitiater/w
Textual Convention: AdGenDslProxyInitiate Enumeration
Type Values:
1initiate
 .1.3.6.1.4.1.664.5.59.4.1.1.1.10
adGenDslProxyFrameGroundStatus
Status of Frame Ground Detection command. When the results
are available, they may be retrieved from adGenDslProxyFrameGroundTable.
AdGenDslProxyStatus
Textual Convention: AdGenDslProxyStatus Enumeration
Type Values:
1neverActivated
2inProgress
3resultsValid
4error
 .1.3.6.1.4.1.664.5.59.4.1.1.1.11
adGenDslProxyFrameGroundLastTime
Timestamp of last valid results for Frame Ground Detection command.
AdGenDslProxyLastTime
Textual Convention: AdGenDslProxyLastTime Unsigned32
 .1.3.6.1.4.1.664.5.59.4.1.1.1.12

adGenDslProxySystemTable

table
.1.3.6.1.4.1.664.5.59.4.2.1 · 1 row entry · 4 columns
Open in standard view 
This table indicates the type of HDSL system detected
at the other end of the T1 line.
          
Entries in this table represent the most recent information
acquired for this T1 interface.  It is updated on demand by
adGenDslProxySystemTypeInitiate.  It may also be updated when
other commands are requested.
adGenDslProxySystemEntry entry .1.3.6.1.4.1.664.5.59.4.2.1.1
An entry in the adGenDslProxySystemTable. Each entry
is indexed by the ifIndex of the T1 interface to which
the remote HDSL span is attached.
Indexes
IF-MIBifIndex
Column Syntax OID
adGenDslProxySystemValid
Indicates whether a valid support-capable HDSL LTU was
detected, based on the last time this system was discovered.
Enumeration
Enumerated Values:
1unknown
2valid
3invalid
 .1.3.6.1.4.1.664.5.59.4.2.1.1.1
adGenDslProxySystemLastError
If the system is invalid, provides the best available
reason discovery failed.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.59.4.2.1.1.2
adGenDslProxySystemType
Basic type of the detected HDSL system.
Enumeration
Enumerated Values:
1twoWire
2fourWire
 .1.3.6.1.4.1.664.5.59.4.2.1.1.3
adGenDslProxyNumRepeaters
Number of repeaters in the HDSL span.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.59.4.2.1.1.4

adGenDslProxyLoopbackTable

table
.1.3.6.1.4.1.664.5.59.4.2.2 · 1 row entry · 2 columns
Open in standard view 
This table can be used to manage loopbacks on the units.
in the HDSL span.
          
Entries in this table are dynamically populated based on
system information discoverd from the remote LTU.  To
populate rows in this table for an HDSL span, use
adGenDslProxySystemTypeInitiate.  To update the information
in this table use adGenDslProxyLoopbackStatusInitiate.
adGenDslProxyLoopbackEntry entry .1.3.6.1.4.1.664.5.59.4.2.2.1
An entry in the adGenDslProxyLoopbackTable. Each entry
is indexed by the ifIndex of the T1 interface to which
the remote HDSL span is attached and the unit in the span.
Indexes
IF-MIBifIndex ADTRAN-SHDSL-MIBadEShdslInvIndex
Column Syntax OID
adGenDslProxySetLoopback
Initiate or clear a loopback on a unit in the span. The
directon of the loopback is indicated - network-facing,
customer-facing, or both. This OID is effectively
write-only. A GET on this OID has no meaning. To
dete…
Enumerationr/w
Enumerated Values:
1none
2network
3customer
4bilateral
 .1.3.6.1.4.1.664.5.59.4.2.2.1.1
adGenDslProxyLoopbackStatus
The current state of loopbacks on the unit. This
value is refreshed using adGenDslProxyLoopbackStatusInitiate.
Enumeration
Enumerated Values:
1none
2network
3customer
4bilateral
 .1.3.6.1.4.1.664.5.59.4.2.2.1.2

adGenDslProxyFrameGroundTable

table
.1.3.6.1.4.1.664.5.59.4.2.3 · 1 row entry · 1 columns
Open in standard view 
This table can be used to determine the results of a
Frame Ground Detection test on the remote LTU.
          
Entries in this table are dynamically populated based on
system information discoverd from the remote LTU.  To
populate rows in this table for an HDSL span, use
adGenDslProxySystemTypeInitiate.  To update the information
in this table use adGenDslProxyFrameGroundInitiate.
adGenDslProxyFrameGroundEntry entry .1.3.6.1.4.1.664.5.59.4.2.3.1
An entry in the adGenDslProxyFrameGroundTable. Each entry
is indexed by the ifIndex of the T1 interface to which
the remote HDSL span is attached.
Indexes
IF-MIBifIndex
Column Syntax OID
adGenDslProxyFrameGroundResult
The result of the Frame Ground Detection test on the remote
LTU. This value is refreshed using
adGenDslProxyFrameGroundInitiate.
Enumeration
Enumerated Values:
1goodGround
2badGround
 .1.3.6.1.4.1.664.5.59.4.2.3.1.1