ADTRAN-DYNAMIC-COUNTERS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
44
adGenDCSlotTable
table.1.3.6.1.4.1.664.5.70.53.1.1
·
1 row entry
·
7 columns
Provides information about dynamic counter slot support.
Provides information about dynamic counter slot support.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
adGenDCSlotSupport
Identifies the dynamic counter matching types supported
by the slot. Each bit will be set if the matching type can be used in adGenDCProfileTable. The values are: color - can use adGenDCProfileColorType… |
Bits Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.1.1.1 |
||||||||||||||||||||||||||||||||||||
|
adGenDCSlotMaxDCProfileIndex
The maximum index value that can be used for the dynamic counter
profile index on this slot. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.1.1.2 |
||||||||||||||||||||||||||||||||||||
|
adGenDCSlotNextDCProfileIndex
Identifies the next free index for a dynamic counter profile.
Reports 0 if there is no available entry. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.1.1.3 |
||||||||||||||||||||||||||||||||||||
|
adGenDCSlotMaxDCIndex
The maximum index value that can be used for the dynamic counter
index on this slot. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.1.1.4 |
||||||||||||||||||||||||||||||||||||
|
adGenDCSlotNextDCIndex
Identifies the next free index for a dynamic counter.
Reports 0 if there is no available entry. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.1.1.5 |
||||||||||||||||||||||||||||||||||||
|
adGenDCSlotClearAllDC
This will always report idle. To clear all dynamic counter
counts on the slot, write clearAll to this element. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.1.1.6 |
||||||||||||||||||||||||||||||||||||
|
adGenDCSlotLastError
The details of the last error seen at the slot level,
based on queries to this entry. The main use may be to report the error when there are no more entries available. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.664.5.70.53.1.1.1.7 |
adGenDCProfileTable
table.1.3.6.1.4.1.664.5.70.53.1.2
·
1 row entry
·
24 columns
Provides information about dynamic counter matching criteria.
Provides information about dynamic counter matching criteria.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenDCProfileIndex
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
adGenDCProfileIndex
Identifies the index of the dynamic counter profile.
The index will be from 1 to N, where N is the maximum number of dynamic counters supported by the module. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.1 |
||||||||||||||||||||||
|
adGenDCProfileRowStatus
This object is used to create a new counter profile and
delete an existing counter profile. To create, write createAndWait(5) or createAndGo(4) to this element. To delete, write destroy(6) to this element. The values … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.2 |
||||||||||||||||||||||
|
adGenDCProfileColorType
Specify the color of the traffic to be matched in this
profile. The default is noMatching, which means the color will not be used in this profile. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.3 |
||||||||||||||||||||||
|
adGenDCProfilePBitType
Specify whether the P-Bit is being matched in this
profile. The default is noMatching, which means the P-Bit will not be used in this profile. If pBit is set, then the matched P-Bit value is specified in adGenDCProfileP… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.4 |
||||||||||||||||||||||
|
adGenDCProfilePBit
Specify a P-Bit value being matched in this
profile when adGenDCProfilePBitType is set to pBit. This is unused if adGenDCProfilePBitType is set to anything else. This value defaults to 0. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.5 |
||||||||||||||||||||||
|
adGenDCProfileSTagType
Specify whether the S-Tag is being matched in this
profile. The default is noMatching, which means the S-Tag will not be used in this profile. If sTag is set, then the matching S-Tag value is specified in… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.6 |
||||||||||||||||||||||
|
adGenDCProfileSTag
Specify an S-Tag value being matched in this
profile when adGenDCProfileSTagType is set to sTag. This is unused if adGenDCProfileSTagType is set to anything else. This value defaults to 0. |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.7 |
||||||||||||||||||||||
|
adGenDCProfileDestMacType
Specify whether the destination MAC is being matched in
this profile. The default is noMatching, which means the MAC will not be used in this profile. If mac is set, then the matched destination MAC value is specified … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.8 |
||||||||||||||||||||||
|
adGenDCProfileDestMacAddress
Specify a destination MAC address being matched in this
profile when adGenDCProfileDestMacType is set to mac. This is unused if adGenDCProfileDestMacType is set to anything else. This defaults to all-0's. |
SNMPv2-TCPhysAddressr/w Textual Convention: SNMPv2-TCPhysAddress OctetString |
.1.3.6.1.4.1.664.5.70.53.1.2.1.9 |
||||||||||||||||||||||
|
adGenDCProfileDestIpType
Specify whether the destination IP is being matched in
this profile. The default is noMatching, which means the IP will not be used in this profile. If ip is set, then the matched destination IP value is specified in a… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.10 |
||||||||||||||||||||||
|
adGenDCProfileDestIpAddress
Specify a destination IP address being matched in this
profile when adGenDCProfileDestIpType is set to ip. This is unused if adGenDCProfileDestIpType is set to anything else. This defaults to all-0's. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.11 |
||||||||||||||||||||||
|
adGenDCProfileSrcMacType
Specify whether the source MAC is being matched in
this profile. The default is noMatching, which means the MAC will not be used in this profile. If mac is set, then the matched source MAC value is specified in adGenDC… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.12 |
||||||||||||||||||||||
|
adGenDCProfileSrcMacAddress
Specify a source MAC address being matched in this
profile when adGenDCProfileSrcMacType is set to mac. This is unused if adGenDCProfileSrcMacType is set to anything else. This defaults to all-0's. |
SNMPv2-TCPhysAddressr/w Textual Convention: SNMPv2-TCPhysAddress OctetString |
.1.3.6.1.4.1.664.5.70.53.1.2.1.13 |
||||||||||||||||||||||
|
adGenDCProfileSrcIpType
Specify whether the source IP is being matched in
this profile. The default is noMatching, which means the IP will not be used in this profile. If ip is set, then the matched source IP value is specified in adGenDCProf… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.14 |
||||||||||||||||||||||
|
adGenDCProfileSrcIpAddress
Specify a source IP address being matched in this
profile when adGenDCProfileSrcIpType is set to ip. This is unused if adGenDCProfileSrcIpType is set to anything else. This defaults to all-0's. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.15 |
||||||||||||||||||||||
|
adGenDCProfileLastError
The details of the last error seen for a profile,
based on queries to this entry. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.16 |
||||||||||||||||||||||
|
adGenDCProfileEgressQueueType
Specify whether the Egress queue is being matched in this
profile. If egressQueue is set, then the matching egress Queue value is specified in adGenDCProfileEgressQueue. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.17 |
||||||||||||||||||||||
|
adGenDCProfileEgressQueue
Egress queue number.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.18 |
||||||||||||||||||||||
|
adGenDCProfileCtagVlanType
Specify whether the C-Tag is being matched in this
profile. If cTag is set, then the matching C-Tag value is specified in adGenDCProfileCtagVlan. If allCTags is set, then this will match al… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.19 |
||||||||||||||||||||||
|
adGenDCProfileCtagVlan
Customer VLAN ID used to identify traffic
|
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.20 |
||||||||||||||||||||||
|
adGenDCProfileCtagPriType
Specify whether the CTag is being matched in this
profile. If cTagPri is set, then the matched CTag value is specified in adGenDCProfileCtagPri. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.21 |
||||||||||||||||||||||
|
adGenDCProfileCtagPri
Priority used by the C-Tag on traffic meeting the match criteria.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.22 |
||||||||||||||||||||||
|
adGenDCProfileEvcMap
Name of the EVC map. If null string is set, matching is disabled.
Null string will be the default. |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.664.5.70.53.1.2.1.23 |
||||||||||||||||||||||
|
adGenDCProfileDiscardReason
Configures the dynamic counter to count packets that
have been dropped due to one of the enumerated drop criteria. Discard reason 'none(11)' means that all packets that are NOT dropped are counted. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.2.1.24 |
adGenDCConfigTable
table.1.3.6.1.4.1.664.5.70.53.1.3
·
1 row entry
·
8 columns
Provides information about dynamic counter configuration. This tables connects a profile and an interface into a dynamic counter entry.
Provides information about dynamic counter configuration.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenDCConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
adGenDCConfigIndex
The index of the dynamic counter.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.3.1.1 |
||||||||||||
|
adGenDCConfigRowStatus
This element provides the administrative state.
This object is used to create a new dynamic counter, delete an existing dynamic counter, and to enable/disable the dynamic counter. To create or delete, write createAnd… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.664.5.70.53.1.3.1.2 |
||||||||||||
|
adGenDCConfigProfile
The index of the adGenDCProfile that will be used.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.3.1.3 |
||||||||||||
|
adGenDCConfigInterface
The IfIndex of the interface that will be used.
|
IF-MIBInterfaceIndexOrZeror/w Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.3.1.4 |
||||||||||||
|
adGenDCConfigType
The type of the statistics to be gathered, either
tx, rx, or queue statistics. The statistics types are only supported if indicated in adGenDCSlotSupport. If queue is specified, the queue number is indicated in adGenDCC… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.3.1.5 |
||||||||||||
|
adGenDCConfigInterfaceQueue
Indicates the queue number, if adGenDCConfigType
is set to queue. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.664.5.70.53.1.3.1.6 |
||||||||||||
|
adGenDCConfigInclude
Indicates whether the match to the counter profile
should be included in the counts or excluded from the counts. The default value is to include them in the counts. This setting is subject to the settings in adGenDCSlot… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.3.1.7 |
||||||||||||
|
adGenDCConfigLastError
The details of the last error seen for a dynamic counter,
based on queries to this entry. This may include invalid values, reasons for rejecting configuration items, or reasons the counter cannot go running. |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.664.5.70.53.1.3.1.8 |
adGenDCStatusTable
table.1.3.6.1.4.1.664.5.70.53.1.4
·
1 row entry
·
5 columns
Provides status about the dynamic counter table, including counts that have been collected.
Provides status about the dynamic counter table, including
counts that have been collected.
counts that have been collected.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenDCConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
adGenDCStatusRowStatus
This object is used to report the operational status
of the dynamic counters, either inService or notReady. |
SNMPv2-TCRowStatus Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.664.5.70.53.1.4.1.1 |
||||||||||||
|
adGenDCStatusOctets
The total number of octets / bytes counted by this dynamic counter.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.664.5.70.53.1.4.1.2 |
||||||||||||
|
adGenDCStatusPkts
The total number of packets counted by this dynamic counter.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.664.5.70.53.1.4.1.3 |
||||||||||||
|
adGenDCStatusAvgBitsPerSec
The average number of bits per second counted on the dynamic counter
during the last 5 minutes. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.664.5.70.53.1.4.1.4 |
||||||||||||
|
adGenDCStatusClear
This will always report idle. To clear the dynamic counter
counts, write clear(1) to this element. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.664.5.70.53.1.4.1.5 |