A3Com-Mip-r1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

a3ComMipPortTable

table mandatory

.1.3.6.1.4.1.43.2.27.2.1 · 1 row entry · 5 columns

Open in standard view

This table contains entries of parameters associated with every port
or tunnel.

a3ComMipPortEntry entry .1.3.6.1.4.1.43.2.27.2.1.1

Each entry contains information for a spcified port or tunnel.

Indexes

a3ComMipPortIndex

Column Syntax OID

a3ComMipPortIndex mandatory

The port number or tunnel ID of which this entry applies. The
tunnel ID starts with 1025 and end with 1056, i.e. total tunnel
number is limited to 32.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.27.2.1.1.1

a3ComMipPortQueryInterval mandatory

This object specifies the time interval in seconds that a Host
Query message is sent to the attached subnet to request for the
local group membership. It also derives the Membership Expiration
time which is set to two t…

Integer32r/w

Constraints:
range: 5-5400

.1.3.6.1.4.1.43.2.27.2.1.1.2

a3ComMipPortThreshold mandatory

This object specifies the minimum IP TTL required for a multicast
datagram to be forwarded to the given port or tunnel.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.43.2.27.2.1.1.3

a3ComMipPortQuerier mandatory

This object specifies if the system is responsible for sending out
Host Query messages on this port. If the value is yes(1) then the
system is the designated router on the subnet this port connects to
and the system is …

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.43.2.27.2.1.1.4

a3ComMipPortPaceMode mandatory

This object is used to control PACE mode. If set to enabled(1),
the multicast packets will be sent out with the Universal/Local bit
set, or Priority MAC. If set to disabled(2) the Universal/Local bit
is clear, or Intera…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.43.2.27.2.1.1.5

a3ComMipLocalGroupTable

table mandatory

.1.3.6.1.4.1.43.2.27.2.2 · 1 row entry · 4 columns

Open in standard view

This table contains group membership information of each attached
subnet.

a3ComMipLocalGroupEntry entry .1.3.6.1.4.1.43.2.27.2.2.1

Each entry contains a group membership information associated with
a specific port.

Indexes

a3ComMipLocalGroupPort a3ComMipLocalGroupIpAddr

Column Syntax OID

a3ComMipLocalGroupPort mandatory

This object specifies the port number to which this entry applies.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.27.2.2.1.1

a3ComMipLocalGroupIpAddr mandatory

This object specifies group's address presents on the specified
port. If the port is configured as a tunnel, there will be no group
address associated with it.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.27.2.2.1.2

a3ComMipLocalGroupType mandatory

This object specifies the type of local group. This object can only
be set to 'static' by SET command, and if the local group is learned
from IGMP, it is set to 'igmp'.

Enumeration

Enumerated Values:

1	static
2	igmp

.1.3.6.1.4.1.43.2.27.2.2.1.3

a3ComMipLocalGroupStatus mandatory

This object is used to add and delete entries in this table. See
the definition of RowStatus for detail.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.27.2.2.1.4

a3ComMipSmdsGroupTable

table mandatory

.1.3.6.1.4.1.43.2.27.2.3 · 1 row entry · 3 columns

Open in standard view

This table contains a set of IP network address and SMDS group address
mapping.

a3ComMipSmdsGroupEntry entry .1.3.6.1.4.1.43.2.27.2.3.1

Each entry contains an IP network address to SMDS group address mapping.

Indexes

a3ComMipSmdsGroupIpAddr

Column Syntax OID

a3ComMipSmdsGroupIpAddr mandatory

This is an IP network address for which there is a corresponding
SMDS group address.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.27.2.3.1.1

a3ComMipSmdsGroupMediaAddr mandatory

This is the SMDS group address that corresponds to the IP network
address identified by a3ComMipSmdsGroupIpAddr.

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.43.2.27.2.3.1.2

a3ComMipSmdsGroupStatus mandatory

This object is used to add and delete entries in this table. See
the definition of RowStatus for detail.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.27.2.3.1.3