A3COM0019-RMON-REMOTE-POLL Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
14
.1.3.6.1.4.1.43.10.25.1.1
·
1 row entry
·
14 columns
This table is used to provide remote device monitoring
facilities.
This table allows a list of network devices to be set up and polled regularly
(or only once) by a variety of protocols. The table can be configured to inform
the management station(s) of devices that are not responding to polls or that
have started to respond after a period of silence.
A table used to define device monitoring.
Indexes
remPollIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
remPollIndex
mandatory
Unique identifier of a row in the Poll Table. This
index should be treated in the same way as indices of other RMON tables. The actual number of rows that can be created on any particular device depends… |
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.43.10.25.1.1.1.1 |
||||||||||||||
|
remPollIfIndex
mandatory
Identifies the entry in the ifTable which is to be used as
the source of the poll packet. This object may not be modified if the associated remPollStatus object is equal to valid(1). |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.43.10.25.1.1.1.2 |
||||||||||||||
|
remPollAddress
mandatory
This DisplayString is the network address of the device to
monitor. Typically this is an IP, MAC or IPX address. The following formats can be used. IP nnn.nnn.nnn.nnn - dotted format MAC AABBCCDDEEFF … |
OctetStringr/w Constraints: range: 0-50 |
.1.3.6.1.4.1.43.10.25.1.1.1.3 |
||||||||||||||
|
remPollProtocol
mandatory
This defines the protocol with which to monitor the device.
Writing an address to the remPollAddress field causes a default remPollProtocol value to be setup. The default value is derived from the format… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.43.10.25.1.1.1.4 |
||||||||||||||
|
remPollTimeout
mandatory
The time-out value in hundreds of a second for each request
packet. If a device replies to a request packet within the specified time-out, then the poll is judged to be successful. This object may not b… |
RFC1155-SMITimeTicksr/w Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.43.10.25.1.1.1.6 |
||||||||||||||
|
remPollAttempts
mandatory
The number of unsuccessful requests necessary before
deciding that the device is definitely not responding. This object may not be modified if the associated remPollStatus object is equal to valid(1). |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.43.10.25.1.1.1.7 |
||||||||||||||
|
remPollPeriod
mandatory
The device will be polled every remPollPeriod seconds. The
first poll is sent as soon as the remPollStatus is set to valid(1). To prevent overlapping polls, the value of remPollPeriod must be greater than 2*remPollTi… |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.43.10.25.1.1.1.8 |
||||||||||||||
|
remPollLastRequest
mandatory
This is the value of sysUpTime at which the most recent
request packet was sent. To avoid temporary inconsistancies between the values of remPollLastRequest and remPollLastReply. The value of remPollLast… |
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.43.10.25.1.1.1.9 |
||||||||||||||
|
remPollLastReply
mandatory
This is the value of sysUpTime at which the most recent
reply packet was received. The device was responding at this time. The relationship of sysUpTime, remPollLastRequest and remPollLastReply provide t… |
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.43.10.25.1.1.1.10 |
||||||||||||||
|
remPollInformation
mandatory
After each successful poll, this field is updated with some
protocol specific information that was gleaned from the packet exchange. For the IPX protocol, this string contains the number of router hops made by the pol… |
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.43.10.25.1.1.1.11 |
||||||||||||||
|
remPollSuccessEventIndex
mandatory
The index of the eventEntry that is used when a
successful poll is made after a number of unsuccessful polls. The eventEntry identified by a particular value of this index is the same as identified by th… |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.43.10.25.1.1.1.12 |
||||||||||||||
|
remPollFailureEventIndex
mandatory
The index of the eventEntry that is used when an
unsuccessful poll is made after a number of successful polls. The eventEntry identified by a particular value of this index is the same as identified by t… |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.43.10.25.1.1.1.13 |
||||||||||||||
|
remPollOwner
mandatory
The RMON OwnerString conventions are used here to help
control the multi-manager situations. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.43.10.25.1.1.1.14 |
||||||||||||||
|
remPollStatus
mandatory
This object controls the creation and deletion of entries in
the remPollTable. The RMON EntryStatus conventions are used. |
RMON-MIBEntryStatusr/w Textual Convention: RMON-MIBEntryStatus EnumerationType Values:
|
.1.3.6.1.4.1.43.10.25.1.1.1.15 |