A3COM-SWITCHING-SYSTEMS-FILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
28

a3ComFilterAddressGroupTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.1.3 · 1 row entry · 5 columns
Open in standard view 
A list of address group entries.  A single 
entry exists in this list for each defined 
address group in the system.
a3ComFilterAddressGroupEntry entry .1.3.6.1.4.1.43.29.4.20.1.3.1
An individual address group entry.
Indexes
a3ComFilterAddressGroupId
Column Syntax OID
a3ComFilterAddressGroupId mandatory
This object uniquely identifies an address group in the
systems. Its value, successively increases starting from 0,
will change only if the system is rebooted. This object is
obtained from a3ComFilterAddressGroupNex…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.1.3.1.1
a3ComFilterAddressGroupMaskId mandatory
This object identifies an address group in a bridge. Each
address group has an unique mask identifier, range from 1 to 32,
associated with it in a bridge. This field has to be set in
order to create a new address gro…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.20.1.3.1.2
a3ComFilterAddressGroupBridgeMask mandatory
A mask that uniquely identifies the bridge value(s)
associated with this address group entry. For example,
0x0000 0000 0000 0003 represents the address group entry in
bridge number 1 and 2.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.43.29.4.20.1.3.1.3
a3ComFilterAddressGroupName mandatory
The name of an address group. Each address group
has an unique name in a system.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.43.29.4.20.1.3.1.4
a3ComFilterAddressGroupStatus mandatory
The status column for this address group entry. This OBJECT
can be set to:
createAndGo(4)
destroy(6)

The following values may be read:
active(1)

Setting this object to createAndGo(4…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.1.3.1.5

a3ComFilterAddressTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.1.4 · 1 row entry · 3 columns
Open in standard view 
A list of address entries.
a3ComFilterAddressEntry entry .1.3.6.1.4.1.43.29.4.20.1.4.1
A set of parameters for a particular address entry.
Indexes
a3ComFilterAddressId a3ComFilterAddressAddress
Column Syntax OID
a3ComFilterAddressId mandatory
This object uniquely identifies an address group as
defined in a3ComFilterAddressGroupTable. It is obtained
from a3ComFilterAddressGroupNextAvailableIndex.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.1.4.1.1
a3ComFilterAddressAddress mandatory
The physical address of this entry.
RFC1213-MIBPhysAddress
Textual Convention: RFC1213-MIBPhysAddress OctetString
 .1.3.6.1.4.1.43.29.4.20.1.4.1.2
a3ComFilterAddressStatus mandatory
The status column for this address group entry. This
OBJECT can be set to:
createAndGo(4)
destroy(6)

The following values may be read:
active(1)

Setting this object to createAndGo(4)…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.1.4.1.3

a3ComFilterPortGroupTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.2.3 · 1 row entry · 5 columns
Open in standard view 
A list of port group entries.  A single 
entry exists in this list for each defined 
port group in the system.
a3ComFilterPortGroupEntry entry .1.3.6.1.4.1.43.29.4.20.2.3.1
A set of parameters for an individual port
group entry.
Indexes
a3ComFilterPortGroupId
Column Syntax OID
a3ComFilterPortGroupId mandatory
This object uniquely identifies a port group in the
systems. Its value, successively increases starting from 0,
will change only if the system is rebooted. This object is
obtained from a3ComFilterPortGroupNextAvaila…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.2.3.1.1
a3ComFilterPortGroupMaskId mandatory
This object identifies a port group in a bridge. Each
port group has an unique mask identifier, range from 1 to 32,
associated with it in a bridge. This field has to be set in
order to create a new port group in a br…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.20.2.3.1.2
a3ComFilterPortGroupBridgeNumber mandatory
The bridge index associated with this port group.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.20.2.3.1.3
a3ComFilterPortGroupName mandatory
The name of this port group. This object has be
unique in a system.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.43.29.4.20.2.3.1.4
a3ComFilterPortGroupStatus mandatory
The status column for this port group entry. This OBJECT
can be set to:
createAndGo(4)
destroy(6)

The following values may be read:
active(1)


Setting this object to …
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.2.3.1.5

a3ComFilterPortTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.2.4 · 1 row entry · 4 columns
Open in standard view 
A list of port entries.
a3ComFilterPortEntry entry .1.3.6.1.4.1.43.29.4.20.2.4.1
An individual port entry.
Indexes
a3ComFilterPortId a3ComFilterPortType a3ComFilterPortPort
Column Syntax OID
a3ComFilterPortId mandatory
This object uniquely identify an address group in the systems.
It successively increases starting from 1. This value is
obtained through a3ComFilterPortGroupNextAvailableIndex when
a new port group needs to be create…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.2.4.1.1
a3ComFilterPortType mandatory
This indicates interface port type(s) that are currently
supported by LanPlex modules.
A3ComFilterPortType
Textual Convention: A3ComFilterPortType Integer32
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.43.29.4.20.2.4.1.2
a3ComFilterPortPort mandatory
The port on the bridge identified by port type.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.2.4.1.3
a3ComFilterPortStatus mandatory
The status column for this port group entry.
This OBJECT can be set to:

createAndGo(4)
destroy(6)

The following values may be read:
active(1)

Setting this object to cre…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.2.4.1.4

a3ComBridgeFilterTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.3.3 · 1 row entry · 5 columns
Open in standard view 
The list of stored bridge packet filter programs on 
bridge(s), bridge port(s) and port processing path.
a3ComBridgeFilterEntry entry .1.3.6.1.4.1.43.29.4.20.3.3.1
The set of parameters for an individual bridge packet filter
program.
Indexes
a3ComBridgeFilterId a3ComBridgeFilterBridgeNumber
Column Syntax OID
a3ComBridgeFilterId mandatory
An index that uniquely identifies a bridge filter in a system.
Its value will change only if the system is rebooted.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.3.1.1
a3ComBridgeFilterBridgeNumber mandatory
The bridge index associated with this bridge
filter program.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.3.1.2
a3ComBridgeFilterName mandatory
The filter name associated with this entry.
OctetString
Constraints:
range: 32-32
 .1.3.6.1.4.1.43.29.4.20.3.3.1.3
a3ComBridgeFilterProgram mandatory
The bridge filter program.
OctetString
Constraints:
range: 255-255
 .1.3.6.1.4.1.43.29.4.20.3.3.1.4
a3ComBridgeFilterStatus mandatory
The status column for this filter definition entry.
This OBJECT can be set to:

createAndGo(4)
destroy(6)

The following values may be read:
active(1)

Creation of bridge…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.3.3.1.5

a3ComPortFilterTable

table mandatory
.1.3.6.1.4.1.43.29.4.20.3.4 · 1 row entry · 6 columns
Open in standard view 
The list of stored bridge packet filter programs on 
bridge(s), bridge port(s) and port processing path.
a3ComPortFilterEntry entry .1.3.6.1.4.1.43.29.4.20.3.4.1
The set of parameters for an individual bridge packet filter
program.
Indexes
a3ComPortFilterId a3ComPortFilterBridgeNumber a3ComPortFilterBridgePortType a3ComPortFilterBridgePortPort
Column Syntax OID
a3ComPortFilterId mandatory
An index that uniquely identifies a bridge filter on the bridge.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.4.1.1
a3ComPortFilterBridgeNumber mandatory
The bridge index associated with this bridge
filter program.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.4.1.2
a3ComPortFilterBridgePortType mandatory
This indicates interface port type(s) that are currently
supported by LanPlex modules.
A3ComFilterPortType
Textual Convention: A3ComFilterPortType Integer32
Type Constraints:
range: 1..5
 .1.3.6.1.4.1.43.29.4.20.3.4.1.3
a3ComPortFilterBridgePortPort mandatory
The port on the bridge identified by this row's a3ComPortFilterBridgeNumber.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.20.3.4.1.4
a3ComPortFilterPktProcessPath mandatory
The packet processing path to apply the filter. The value
is a bit mask defined as follows:

Mask Value Path Description
0x1 Xmit All All frames xmitted to segment
connected to …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.20.3.4.1.5
a3ComPortFilterStatus mandatory
The status column for this filter definition entry.
This OBJECT can be set to:

active(1)
createAndGo(4)
createAndWait(5)
destroy(6)

The following values may be read:
active(1)
notIn…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.20.3.4.1.6