A3COM-SWITCHING-SYSTEMS-FDDI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
36

a3ComFddiSMTTable

table mandatory
.1.3.6.1.4.1.43.29.10.1.1 · 1 row entry · 6 columns
Open in standard view 
A list of optional SMT entries.  The number of entries 
shall not exceed the value of snmpFddiSMTNumber.
a3ComFddiSMTEntry entry .1.3.6.1.4.1.43.29.10.1.1.1
An optional SMT entry containing information common to
a given optional SMT.
Indexes
a3ComFddiSMTIndex
Column Syntax OID
a3ComFddiSMTIndex mandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.1.1.1.1
a3ComFddiSMTManufacturerOUI mandatory
The three octets of manufacturer data which make
up the manufacturerOUI component.
OctetString
Constraints:
range: 3-3
 .1.3.6.1.4.1.43.29.10.1.1.1.2
a3ComFddiSMTManufacturerData mandatory
The 29 octets of manufacturer data which make up the
manufacturerData component.
OctetString
Constraints:
range: 29-29
 .1.3.6.1.4.1.43.29.10.1.1.1.3
a3ComFddiSMTHoldState mandatory
This variable indicates the current state of the
Hold function. The value 'not-holding' is the
default and initial value. The value must be set
to 'not-holding' as part of Active-Actions and
when the conditions cau…
Enumeration
Enumerated Values:
1not-implemented
2not-holding
3holding-prm
4holding-sec
 .1.3.6.1.4.1.43.29.10.1.1.1.4
a3ComFddiSMTSetCount mandatory
This variable is composed of a count incremented
in response to a Set operation on the MIB, and the
time of the change, however only the count is
reported here (refer to ANSI SMT 8.4.1).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.10.1.1.1.5
a3ComFddiSMTLastSetStationId mandatory
The Station ID of the station that effected the last
change in the FDDI MIB.
FDDI-SMT73-MIBFddiSMTStationIdType
Textual Convention: FDDI-SMT73-MIBFddiSMTStationIdType OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.43.29.10.1.1.1.6

a3ComFddiMACBridgeFunctionTable

table mandatory
.1.3.6.1.4.1.43.29.10.2.1 · 1 row entry · 3 columns
Open in standard view 
A list of MAC bridge function entries.
a3ComFddiMACBridgeFunctionEntry entry .1.3.6.1.4.1.43.29.10.2.1.1
Bridge function information for a given MAC
within a given SMT.
Indexes
a3ComFddiMACBridgeFunctionSMTIndex a3ComFddiMACBridgeFunctionMACIndex
Column Syntax OID
a3ComFddiMACBridgeFunctionSMTIndex mandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.2.1.1.1
a3ComFddiMACBridgeFunctionMACIndex mandatory
Index variable for uniquely identifying the MAC
object instances.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.2.1.1.2
a3ComFddiMACBridgeFunctions mandatory
Indicates the MAC's optional bridging functions.

The Value -1 is used to indicate that bridging is
not supported by this MAC.

The value is a sum. This value initially takes
the value z…
Integer32
Constraints:
range: -1-7
 .1.3.6.1.4.1.43.29.10.2.1.1.3

a3ComFddiMACTPriTable

table mandatory
.1.3.6.1.4.1.43.29.10.2.2 · 1 row entry · 9 columns
Open in standard view 
A list of MAC T-Pri entries.
a3ComFddiMACTPriEntry entry .1.3.6.1.4.1.43.29.10.2.2.1
A collection of T-Pri information for a given MAC within
a given SMT.
Indexes
a3ComFddiMACTPriSMTIndex a3ComFddiMACTPriMACIndex
Column Syntax OID
a3ComFddiMACTPriSMTIndex mandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.2.2.1.1
a3ComFddiMACTPriMACIndex mandatory
Index variable for uniquely identifying the MAC
object instances.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.2.2.1.2
a3ComFddiMACTPri0 mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.3
a3ComFddiMACTPri1 mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.4
a3ComFddiMACTPri2 mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.5
a3ComFddiMACTPri3 mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.6
a3ComFddiMACTPri4 mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.7
a3ComFddiMACTPri5 mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.8
a3ComFddiMACTPri6 mandatory
This attribute is an unsigned twos-complement T-pri
threshold as described in the MAC standard converted
to non-twos-complement form and reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNano
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.2.2.1.9

a3ComFddiPATHRingTable

table mandatory
.1.3.6.1.4.1.43.29.10.3.1 · 1 row entry · 5 columns
Open in standard view 
A list of PATH ring entries.
a3ComFddiPATHRingEntry entry .1.3.6.1.4.1.43.29.10.3.1.1
Ring latency, trace status, and T-Rmode information for a
given PATH within a given SMT.
Indexes
a3ComFddiPATHRingSMTIndex a3ComFddiPATHRingPATHIndex
Column Syntax OID
a3ComFddiPATHRingSMTIndex mandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.3.1.1.1
a3ComFddiPATHRingPATHIndex mandatory
Index variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.43.29.10.3.1.1.2
a3ComFddiPATHRingLatency mandatory
Gives the total accumulated latency of the ring
associated with this path. May be measured directly
by the station or calculated by a management station.
Values of this object are reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNanor/w
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.3.1.1.3
a3ComFddiPATHTraceStatus mandatory
This attribute indicates the current trace status of
the path.

The value is a sum which represents all of the trace
status information which applies. This value initially
takes the value zero, then f…
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.43.29.10.3.1.1.4
a3ComFddiPATHT-Rmode mandatory
Used by RMT to limit the duration of restricted dialogs
on a path. This object is reported in 1 ns units.
FDDI-SMT73-MIBFddiTimeNanor/w
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.3.1.1.5

a3ComFddiPATHSbaTable

table mandatory
.1.3.6.1.4.1.43.29.10.3.2 · 1 row entry · 5 columns
Open in standard view 
A list of PATH Sba entries.
a3ComFddiPATHSbaEntry entry .1.3.6.1.4.1.43.29.10.3.2.1
Sba information for a given PATH within a given SMT.
Indexes
a3ComFddiPATHSbaSMTIndex a3ComFddiPATHSbaPATHIndex
Column Syntax OID
a3ComFddiPATHSbaSMTIndex mandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.3.2.1.1
a3ComFddiPATHSbaPATHIndex mandatory
Index variable for uniquely identifying the
primary, secondary and local PATH object
instances. Local PATH object instances are
represented with integer values 3 to 255.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.43.29.10.3.2.1.2
a3ComFddiPATHSbaPayload mandatory
The payload portion of the Synchronous Bandwidth
Allocation for thi path. This value represents the
maximum number of bytes of data allocated for
transmission per 125 microseconds.
Integer32r/w
Constraints:
range: 0-1562
 .1.3.6.1.4.1.43.29.10.3.2.1.3
a3ComFddiPATHSbaOverhead mandatory
The overhead portion of the Synchronous Bandwith
Allocation for this path. This value repersents the
maximum number of bytes overhead (token capture, frame
header, etc.) used pre negotiated Target Token Rotation
Ti…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.10.3.2.1.4
a3ComFddiPATHSbaAvailable mandatory
This value is the maximum Synchronous Bandwith available
for a path in bytes per second.
Integer32r/w
Constraints:
range: 0-12500000
 .1.3.6.1.4.1.43.29.10.3.2.1.5

a3ComFddiPORTTable

table mandatory
.1.3.6.1.4.1.43.29.10.4.1 · 1 row entry · 4 columns
Open in standard view 
A list of optional PORT entries.
a3ComFddiPORTEntry entry .1.3.6.1.4.1.43.29.10.4.1.1
MAC loop time and EB error count information for a
given PORT within a given SMT.
Indexes
a3ComFddiPORTSMTIndex a3ComFddiPORTIndex
Column Syntax OID
a3ComFddiPORTSMTIndex mandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.4.1.1.1
a3ComFddiPORTIndex mandatory
Index variable for uniquely identifying the PORT
object instances.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.4.1.1.2
a3ComFddiPORTMACLoopTime mandatory
This attribute controls the value used for T-Next(9)
(see 9.4.4.2.3). This object is reported in 1 ns
units.
FDDI-SMT73-MIBFddiTimeNanor/w
Textual Convention: FDDI-SMT73-MIBFddiTimeNano Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.29.10.4.1.1.3
a3ComFddiPORTEBErrorCt mandatory
A count that should as closely as possible match the
times an Elasticity Buffer Error has occurred while in
active line state.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.10.4.1.1.4

a3ComFddiPORTLSTable

table mandatory
.1.3.6.1.4.1.43.29.10.4.2 · 1 row entry · 4 columns
Open in standard view 
A list of optional PORT line state entries.
a3ComFddiPORTLSEntry entry .1.3.6.1.4.1.43.29.10.4.2.1
Maintenance line state and PC line state information
for a given PORT within a given SMT.
Indexes
a3ComFddiPORTLSSMTIndex a3ComFddiPORTLSPORTIndex
Column Syntax OID
a3ComFddiPORTLSSMTIndex mandatory
A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of the entity's network
management system…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.4.2.1.1
a3ComFddiPORTLSPORTIndex mandatory
Index variable for uniquely identifying the PORT
object instances.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.10.4.2.1.2
a3ComFddiPORTMaintLS mandatory
The PORT Maintenance Line State specifies the line state
(Maint-LS) to be transmitted when the PCM state machine
for the port is in state PC9 Maint.
Enumerationr/w
Enumerated Values:
1quiet
2idle
3master
4halt
5receive-active
6receive-unknown
7receive-noise
 .1.3.6.1.4.1.43.29.10.4.2.1.3
a3ComFddiPORTPCLS mandatory
This attribute indicates the line state (PC-LS) received
by the port.
Enumeration
Enumerated Values:
1quiet
2idle
3master
4halt
5receive-active
6receive-unknown
7receive-noise
 .1.3.6.1.4.1.43.29.10.4.2.1.4