A3COM-PRIVATE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
64

lineTable

table
.1.3.6.1.4.1.43.35.8.2.1 · 1 row entry · 5 columns
Open in standard view 
Table of descriptive and status information about
configuration of each RS-232 line in this system
lineEntry entry .1.3.6.1.4.1.43.35.8.2.1.1
An entry in the table, containing information
about configuration in one RS232 line of the Access Point.
Indexes
lineIndex
Column Syntax OID
lineIndex
This is defined as RS-232 index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.2.1.1.1
lineDataBits
This is defined as number of data bits for the RS232 interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.2.1.1.2
lineParity
This is defined as parity of the RS232 interface.
Enumeration
Enumerated Values:
1odd
2even
99none
 .1.3.6.1.4.1.43.35.8.2.1.1.3
lineSpeed
This is defined as the speed of the RS-232 interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.2.1.1.4
lineStopBits
This is defined as the number of stop bits for the RS-232 interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.2.1.1.5

portTable

table
.1.3.6.1.4.1.43.35.8.3.1 · 1 row entry · 9 columns
Open in standard view 
Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).
portEntry entry .1.3.6.1.4.1.43.35.8.3.1.1
An entry in the table, containing information
about configuration in one switch port of the switch.
Indexes
portIndex
Column Syntax OID
portIndex
This is defined as ifIndex in the IF-MIB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.3.1.1.1
portName
Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.43.35.8.3.1.1.2
portType
Indicates the port type.
Enumeration
Enumerated Values:
1other
2hundredBaseTX
3hundredBaseFX
4thousandBaseSX
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8thousandBaseMiniGBIC
 .1.3.6.1.4.1.43.35.8.3.1.1.3
portSpeedDpxCfg
Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100…
Enumeration
Enumerated Values:
1reserved
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.43.35.8.3.1.1.4
portFlowCtrlCfg
(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…
Enumeration
Enumerated Values:
1enabled
2disabled
3backPressure
4dot3xFlowControl
 .1.3.6.1.4.1.43.35.8.3.1.1.5
portCapabilities
Port capabilities.
Enumeration
Enumerated Values:
1portCap10full
2portCap100half
3portCap100full
4portCap1000half
5portCap1000full
6reserved6
7reserved7
8reserved8
9reserved9
10reserved10
11reserved11
12reserved12
13reserved13
14portCapSym
15portCapFlowCtrl
99portCap10half
 .1.3.6.1.4.1.43.35.8.3.1.1.6
portAutonegotiation
Whether autonegotiation is enabled.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.35.8.3.1.1.7
portSpeedDpxStatus
The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this …
Enumeration
Enumerated Values:
1error
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.43.35.8.3.1.1.8
portFlowCtrlStatus
(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, thi…
Enumeration
Enumerated Values:
1error
2backPressure
3dot3xFlowControl
4none
 .1.3.6.1.4.1.43.35.8.3.1.1.9

dot11AuthenticationServerTable

table
.1.3.6.1.4.1.43.35.8.7.6 · 1 row entry · 8 columns
Open in standard view 
Table of descriptive and status information about
configuration of each authentication server.
dot11AuthenticationServerEntry entry .1.3.6.1.4.1.43.35.8.7.6.1
An entry in the table, containing information
about configuration of one authentication server of the AP.
Indexes
dot11AuthenticationServerIndex
Column Syntax OID
dot11AuthenticationServerIndex
Index of the Authentication Server
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.7.6.1.1
dot11AuthenticationServer
This value indicates the IP address of the authentication server.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.35.8.7.6.1.2
dot11AuthenticationPort
This value indicates the UDP Port used by the authentication server.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.43.35.8.7.6.1.3
dot11AuthenticationKey
This value indicates the shared key used by the authentication server.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.43.35.8.7.6.1.4
dot11AuthenticationRetransmit
This value indicates the retransmit timer length used by the
authentication server.
Integer32r/w
Constraints:
range: 1-30
 .1.3.6.1.4.1.43.35.8.7.6.1.5
dot11AuthenticationTimeout
This value indicates the Timeout value(sec) used by the
authentication server.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.43.35.8.7.6.1.6
dot11AuthenticationAcctPort
The port number for radius server accounting.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.43.35.8.7.6.1.7
dot11AuthenticationInterimUpdate
This value indicates the Timeout value(sec) used by the
radius server interim update.
Integer32r/w
Constraints:
range: 60-86400
 .1.3.6.1.4.1.43.35.8.7.6.1.8

dot11FilterTable

table
.1.3.6.1.4.1.43.35.8.7.7.2 · 1 row entry · 2 columns
Open in standard view 
Table of status information about
each configured MAC Address Filtering Entry.
dot11FilterEntry entry .1.3.6.1.4.1.43.35.8.7.7.2.1
An entry in the table, containing information
about configuration in one radio of the AP.
Indexes
dot11FilterAddress
Column Syntax OID
dot11FilterAddress
This value indicates the MAC address of the
filter entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.35.8.7.7.2.1.1
dot11FilterStatus
This value indicates the Status of the filter entry.
Ifallowed, the client is allowed access to the network.
If disallowed, the no frames will be forwarded to the
network from the client.
Enumerationr/w
Enumerated Values:
30allowed
31denied
32delete
 .1.3.6.1.4.1.43.35.8.7.7.2.1.2

dot11AuthenticationSupplicantTable

table
.1.3.6.1.4.1.43.35.8.7.8 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive and status information about
configuration of supplicant
dot11AuthenticationSupplicantEntry entry .1.3.6.1.4.1.43.35.8.7.8.1
An entry in the table, containing information
about configuration of one supplicant.
Indexes
dot118021xSuppIndex
Column Syntax OID
dot118021xSuppIndex
Index of the interface for which this supplicant is
running. Currently only the ethernet interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.7.8.1.1
dot118021xSuppState
This object is used to enable or disable the 802.1x supplicant.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.43.35.8.7.8.1.2
dot118021xSuppUser
This value indicates the username for supplicant. If value is
configured, will display ****. Else will display EMPTY.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.43.35.8.7.8.1.3
dot118021xSuppPasswd
This value indicates the password for supplicant. If value is
configured, will display ****. Else will display EMPTY.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.43.35.8.7.8.1.4

enterpriseApSecurityTable

table
.1.3.6.1.4.1.43.35.8.9.1 · 1 row entry · 10 columns
Open in standard view 
Table of descriptive and status information about
configuration of each radio in terms of security settings.
enterpriseApSecurityEntry entry .1.3.6.1.4.1.43.35.8.9.1.1
An entry in the table, containing information
about configuration of one radio of the AP.
Indexes
enterpriseApSecurityIndex
Column Syntax OID
enterpriseApSecurityIndex
Radio Index for security settings.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.9.1.1.1
enterpriseApSecurityAuthType
This value indicates the type of authentication in use for this radio interface.
Enumerationr/w
Enumerated Values:
0open
1shared
 .1.3.6.1.4.1.43.35.8.9.1.1.2
enterpriseApSecuritySharedKeyLen
This value indicates the shared key length for this radio interface.
Enumeration
Enumerated Values:
0none
1sixtyFour
2oneHundredTwentyEight
3oneHundredFiftyTwo
 .1.3.6.1.4.1.43.35.8.9.1.1.3
enterpriseApSecurityWPAMode
This value indicates the state of WPA for this radio interface.
Enumerationr/w
Enumerated Values:
0supported
1required
2disabled
 .1.3.6.1.4.1.43.35.8.9.1.1.4
enterpriseApSecurityWPAKeyType
This value indicates the type of WPA Key Management in use for this radio interface.
Enumerationr/w
Enumerated Values:
0dot1x
1presharedkey
 .1.3.6.1.4.1.43.35.8.9.1.1.5
enterpriseApSecurityWPACipher
This value indicates the type of WPA Cipher in use for this radio interface.
Enumerationr/w
Enumerated Values:
0wep
1tkip
2aes
 .1.3.6.1.4.1.43.35.8.9.1.1.6
enterpriseApSecurityWPAPSKType
This value indicates the type of WPA Pre Shared Key in use for this radio interface.
Enumerationr/w
Enumerated Values:
0hex
1alphanumeric
 .1.3.6.1.4.1.43.35.8.9.1.1.7
enterpriseApSecurityWPAPSK
This value indicates WPA Pre Shared Key in use for this radio interface.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.43.35.8.9.1.1.8
enterpriseApSecurityWEPKeyType
This value indicates the type of WEP Key in use for this radio interface.
Enumerationr/w
Enumerated Values:
0hexadecimal
1alphanumeric
 .1.3.6.1.4.1.43.35.8.9.1.1.9
enterpriseApSecurityWEPEnabled
This value indicates whether WEP is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.35.8.9.1.1.10

enterpriseApRadioTable

table
.1.3.6.1.4.1.43.35.8.10.1 · 1 row entry · 11 columns
Open in standard view 
Table of descriptive and status information about
configuration of each radio.
enterpriseApRadioEntry entry .1.3.6.1.4.1.43.35.8.10.1.1
An entry in the table, containing information
about configuration of one radio of the AP.
Indexes
enterpriseApRadioIndex
Column Syntax OID
enterpriseApRadioIndex
Radio Index for configuration.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.10.1.1.1
enterpriseApRadioAutoChannel
This value indicates whether auto channel selection is enabled or not
for this radio interface
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.35.8.10.1.1.2
enterpriseApRadioTransmitPower
This value indicates the transmit power for this radio interface.
Enumerationr/w
Enumerated Values:
1full
2half
3middle
4quarter
5eighth
6min
 .1.3.6.1.4.1.43.35.8.10.1.1.3
enterpriseApRadioTurboMode
This value indicates whether turbo mode is enabled for this radio interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3invalid
 .1.3.6.1.4.1.43.35.8.10.1.1.4
enterpriseApRadioDataRate
This value indicates the data rate for this radio interface.
Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54.
Radio interface G operates all listed data rates. The auto
setting will attempt to set the best …
Enumerationr/w
Enumerated Values:
1oneMbps
2twoMbps
5fiveAndHalfMbps
6sixMbps
9nineMbps
11elevenMbps
12twelveMbps
18eighteenMbps
24twentyFourMbps
36thirtySixMbps
48fourtyEightMbps
54fiftyFourMbps
255auto
 .1.3.6.1.4.1.43.35.8.10.1.1.5
enterpriseApRadioGMode
This value indicates the radio mode for the 802.11g radio.
This setting is only valid for the 802.11g interface.
Enumerationr/w
Enumerated Values:
1bOnly
2gOnly
3bg
4invalid
 .1.3.6.1.4.1.43.35.8.10.1.1.6
enterpriseApRadioAntennaMode
This value indicates the antenna mode in use for the G-radio.
The values are interpreted as follows:
both(1) means use both built-in antennas,
left(2) means use left side.
right(3) means use right side.
invalid(4) …
Enumerationr/w
Enumerated Values:
1both
2left
3right
4invalid
 .1.3.6.1.4.1.43.35.8.10.1.1.7
rogueApState
This value is used to enable/disable Rogue Ap Detection for
this radio interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.35.8.10.1.1.8
rogueApInterval
How often to scan for Rogue Aps. The interval in minutes, with default
of 720(minutes).
Integer32r/w
Constraints:
range: 60-10080
 .1.3.6.1.4.1.43.35.8.10.1.1.9
rogueApDuration
How long to scan each channel (in milliseconds). A longer duration will yield more
complete results. A shorter duration will allow clients a better chance
of remaining connected. Default value is 350(milliseconds).
Integer32r/w
Constraints:
range: 200-1000
 .1.3.6.1.4.1.43.35.8.10.1.1.10
rogueApScanNow
When writing the value to enable, the AP will trigger the Rouge AP scan function.
The value will always return disable(2).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.35.8.10.1.1.11

enterpriseApVapRadioTable

table
.1.3.6.1.4.1.43.35.8.10.2 · 1 row entry · 6 columns
Open in standard view 
Table of descriptive and status information about
configuration of each Vap radio.
enterpriseApVapRadioEntry entry .1.3.6.1.4.1.43.35.8.10.2.1
An entry in the table, containing information
about configuration of one Vap radio of the AP.
Indexes
enterpriseApVapRadioIndex
Column Syntax OID
enterpriseApVapRadioIndex
Radio Index for configuration.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.10.2.1.1
enterpriseApVapRadioState
This value indicates the state of the radio interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.35.8.10.2.1.2
enterpriseApVapRadioClosedSystem
This value indicates whether closed system is enabled for this radio interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.43.35.8.10.2.1.3
enterpriseApVapRadioMaxAssoc
This value indicates the max number of clients allowed on this radio interface.
Integer32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.43.35.8.10.2.1.4
enterpriseApVapRadioTransmitKey
This value indicates default transmit key in use for this radio interface.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.43.35.8.10.2.1.5
enterpriseApVapRadioDescription
This value indicates the description for this radio interface.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.43.35.8.10.2.1.6

radioWdsTable

table
.1.3.6.1.4.1.43.35.8.10.3 · 1 row entry · 1 columns
Open in standard view 
Table of configuration information for Wds for each
Radio interface.
radioWdsEntry entry .1.3.6.1.4.1.43.35.8.10.3.1
An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadioTable). The table does not contain …
Indexes
enterpriseApRadioIndex
Column Syntax OID
wdsApRole
This value indicates the role of the Ap for this radio: normal operation(1),
bridge master(2) which accepts only repeaters to associate with, repeater Ap(3) that
accepts wireless station and other repeaters if it is ro…
Enumerationr/w
Enumerated Values:
1roleAp
2roleBridgeMaster
3roleRepeater
4roleBridge
 .1.3.6.1.4.1.43.35.8.10.3.1.1

radioWdsPeerTable

table
.1.3.6.1.4.1.43.35.8.10.4 · 1 row entry · 2 columns
Open in standard view 
Table of configuration information for Wds Peers for each
Radio interface.
radioWdsPeerEntry entry .1.3.6.1.4.1.43.35.8.10.4.1
An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadioTable) and the peer
index …
Indexes
enterpriseApRadioIndex wdsPeerIndex
Column Syntax OID
wdsPeerIndex
Peer Index for the radio interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.10.4.1.1
wdsPeerBssid
The BSSID for this peer.
OctetStringr/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.43.35.8.10.4.1.2

rogueApDetectionTable

table
.1.3.6.1.4.1.43.35.8.13.1 · 1 row entry · 6 columns
Open in standard view 
Table of each AP that has been detected.
rogueApEntry entry .1.3.6.1.4.1.43.35.8.13.1.1
An entry in the table, containing information
about any AP detected.
Indexes
rogueApIndex
Column Syntax OID
rogueApIndex
Monotonically increasing index.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.43.35.8.13.1.1.1
rogueApBssid
The AP BSSID
OctetString
Constraints:
range: 0-6
 .1.3.6.1.4.1.43.35.8.13.1.1.2
rogueApSsid
The AP SSID
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.43.35.8.13.1.1.3
rogueApPortNumber
Interface index for the radio.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.13.1.1.4
rogueApChannelNumber
Channel where Ap detected.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.13.1.1.5
rogueApRSSIValue
RSSI for AP detected.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.35.8.13.1.1.6