A3COM-HUAWEI-FCOE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
18

h3cFCoECfgTable

table
.1.3.6.1.4.1.43.45.1.10.2.120.1.1.1 · 1 row entry · 5 columns
Open in standard view 
This table facilitates configuration of FCoE parameters
on a per Fibre Channel management instance.
h3cFCoECfgEntry entry .1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1
There is one entry in this table for each
Fibre Channel management instance.
Indexes
FC-MGMT-MIBfcmInstanceIndex
Column Syntax OID
h3cFCoECfgFcmap
This object configures the FC-MAP value used by the FCF
when operating in FPMA mode. The default value is 0EFC00h,
as written in the standard.
OctetStringr/w
Constraints:
range: 3-3
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.1
h3cFCoECfgDynamicVfcCreation
This object is set to 'true' to enable, or 'false' to
disable, the dynamic creation of VFC interfaces on this FCF.
When set to 'true', VFC interfaces are dynamically created
as and when a FIP-based FLOGI or ELP request …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.2
h3cFCoECfgDefaultFCFPriority
The FIP priority value advertised by the FCF to ENodes by
default. h3cFCoEStaticVfcFCFPriority configured for a VFC
interface overrides this setting for the ENode associated
with the VFC.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.3
h3cFCoECfgDATov
The Discovery_Advertisement_Timeout value configured for
the FCF. This is used as the timeout value in seconds by
the FCF to send periodic Discovery Advertisements.
secondsUnsigned32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.4
h3cFCoECfgAddressingMode
Addressing mode(s) supported by the FCF. Implementations
should fail SetRequests for unsupported modes.
Enumerationr/w
Enumerated Values:
1fpma
2spma
3fpmaAndSpma
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.5

h3cFCoEVLANTable

table
.1.3.6.1.4.1.43.45.1.10.2.120.1.1.2 · 1 row entry · 4 columns
Open in standard view 
In fabrics in which VLANs are deployed, this table facilitates
configuration of VLAN and Virtual Fabric associations in an
FCoE network.  In such fabrics, FCoE forwarding for a fabric
is over a VLAN in a (Layer-2) Ethernet network.  That is,
reachability between the ENode/remote-FCF and an FCF for a
given fabric is determined by the reachability provided by the
Ethernet network on the corresponding VLAN.
An active entry in this table indicates which VLAN is used
to transport FCoE traffic for a particular Virtual Fabric.
If VLANs are not deployed or not enabled, entries in this table
are ignored by the bridge.
Some implmentations may allow traffic from only one Virtual
Fabric to be transported over a given VLAN.  Such
implementations should prevent multiple entries with the same
VLAN-ID from being created in this table.
Modifying existing VLAN-Virtual Fabric associations is not
possible.  The specific row must first be deleted and then
a new one created.
h3cFCoEVLANEntry entry .1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1
There is one entry in this table for each VLAN that is
designated to transport FCoE traffic for a given Virtual
Fabric.
Indexes
FC-MGMT-MIBfcmInstanceIndex h3cFCoEVLANIndex h3cFCoEFabricIndex
Column Syntax OID
h3cFCoEVLANIndex
This object identifies the VLAN-ID that the FCoE FCF function
is being enabled for.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1.1
h3cFCoEFabricIndex
This object identifies the Fabric Index of the Virtual Fabric
traffic which is to be transported over the VLAN identified
by h3cFCoEVLANIndex.
T11-TC-MIBT11FabricIndex
Textual Convention: T11-TC-MIBT11FabricIndex Unsigned32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1.2
h3cFCoEVLANOperState
Operational state of this VLAN-Virtual Fabric association
entry. The 'up' state is achieved when both the Virtual
Fabric and VLAN are valid.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1.3
h3cFCoEVLANRowStatus
The status of this conceptual row. The RowStatus becomes active
on successful creation of an entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1.4

h3cFCoEStaticVfcTable

table
.1.3.6.1.4.1.43.45.1.10.2.120.1.1.3 · 1 row entry · 9 columns
Open in standard view 
This table facilitates the creation and deletion of static
VFC interfaces.  While VFCs can be dynamically created based on
FIP FLOGI/ELP requests, operators may want to associate certain
pre-configured policy for a particular ENode or a remote-FCF.
In such cases static VFC creation becomes necessary.  In addition
to being creating, a static VFC also needs to be associated to
an ENode or remote-FCF.  The VFC binding provides such an
associaton.  The binding does not need to be specified when
the row for a VFC is created, but may be specified later.
h3cFCoEStaticVfcEntry entry .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1
There is one entry in this table for each statically created
VFC Interface.
Indexes
FC-MGMT-MIBfcmInstanceIndex h3cFCoEStaticVfcIndex
Column Syntax OID
h3cFCoEStaticVfcIndex
This index uniquely identifies a static VFC entry in this
table.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.1
h3cFCoEStaticVfcFCFPriority
If this VFC is for a VF_Port this object is used to configure
FCF priority to be advertised to the ENode associated with the
VFC.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.2
h3cFCoEStaticVfcBindType
The mechanism to identify the ENode associated with this VFC
if it is of type VF_Port or to identify the remote-FCF
associated with this VFC if it is of type VE_Port.
H3cFCoEVfcBindTyper/w
Textual Convention: H3cFCoEVfcBindType Enumeration
Type Values:
1interfaceIndex
2macAddress
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.3
h3cFCoEStaticVfcBindIfIndex
This object is applicable only when the local FCF is
directly connected to an ENode or remote-FCF over a
specific Ethernet interface, in which case this object
contains the ifIndex of said Ethernet interface.
If the ENo…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.4
h3cFCoEStaticVfcBindMACAddress
This object is applicable when the ENode or remote-FCF to
which the local FCF is connected is identified by a MAC
address. A FIP frame from a ENode or remote-FCF is
associated with this VFC only if the source MAC addre…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.5
h3cFCoEStaticVfcIfIndex
The ifIndex of this Virtual FC interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.6
h3cFCoEStaticVfcCreationTime
The timestamp of this entry's creation time.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.7
h3cFCoEStaticVfcFailureCause
The cause of failure for the last bind operation. This
object will be zero length if and only if the bind is
successful.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.8
h3cFCoEStaticVfcRowStatus
The status of this conceptual row. The RowStatus becomes
active on successful creation of a VFC. The VFC does not
need to be bound for the row to be active, but the VFC must
be bound before becoming operational.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.9