mplsLdpEntityConfGenericIfIndexOrZero

MPLS-LDP-MIB · cisco variant · .1.3.6.1.3.97.1.2.3.1.1.3
Commands MIB view Table view

Object

column r/w IF-MIBInterfaceIndexOrZero 
This value represents either the InterfaceIndex of
the 'ifLayer' where these Generic Label would be created, or
0 (zero).  The value of zero means that the InterfaceIndex
is not known.  For example, if the InterfaceIndex is
created subsequent to the Generic Label's creation, then
it would not be known.  However, if the InterfaceIndex
is known, then it must be represented by this value.
              
If an InterfaceIndex becomes known, then the
network management entity (e.g. SNMP agent) responsible
for this object MUST change the value from 0 (zero) to the
value of the InterfaceIndex.  If this Generic Label is
being used in forwarding data, then the value of this
object MUST be the InterfaceIndex.

Context

MIB
MPLS-LDP-MIB
OID
.1.3.6.1.3.97.1.2.3.1.1.3
Type
column
Access
readwrite
Status
current
Parent
mplsLdpEntityConfGenericLabelRangeEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LDP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LDP-MIB::mplsLdpEntityConfGenericIfIndexOrZero'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'MPLS-LDP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LDP-MIB::mplsLdpEntityConfGenericIfIndexOrZero.<mplsLdpEntityLdpId>.<mplsLdpEntityIndex>.<mplsLdpEntityConfGenericLabelRangeMinimum>.<mplsLdpEntityConfGenericLabelRangeMaximum>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LDP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LDP-MIB::mplsLdpEntityConfGenericIfIndexOrZero'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647