igControlChannelT303

Value of the T303 timer for the Q931 protocol
              
12.5.5.17.1 T303
T303 is the length of time that the IDT and RDT 
will wait for a reply to a SETUP message. 
              
R12-446 [1315] At the IDT, the value of T303 is 
not user settable, its value depends on specific 
vendor implementations, but shall be within the 
range of 700 ms to 4 seconds.
              
R12-447 [1316] The above range is not intended to 
define acceptable response-time performance at 
the RDT, where the low-load (i.e., no other 
external stimuli requiring call processing 
activity) mean response time to a SETUP message 
shall be no greater than 200 ms.
              
R12-448 [1317] At the RDT, the value of T303 
shall be provisionable from 700 ms through 4.7 
seconds in steps of 500 ms; the default shall be 
700 ms.
              
R12-449 [1318] The above range is not intended 
to define acceptable response-time performance 
at the IDT, where the low-load (i.e., no other 
external stimuli requiring call processing 
activity) mean response time to a SETUP message 
shall be no greater than 500 ms.
              
Units in milliseconds.

MIB

ZhoneGR303-MIB

OID

.1.3.6.1.4.1.5504.4.3.1.2.1.3

Type

column

Access

readwrite

Status

current

Units

milliseconds

Parent

igControlChannelEntry