aal2Cid

The Channel Identifier is one of the indices for
the CID table.
              
The maximum number of connections allowed per ATM
VCL is 255. Note that there are restrictions in 
the use of CID and in order to be LES compliant.
              
The following assignments of AAL2 Channels and CID 
Allocation are specified in STR-VMOA-LES-01-00, 
Section 4.4.
  0       Not used
  1-7     Reserved for I.363.2 layer management
  8       Some CPE manufactures use this CID for CCS 
          and/or Emulated Loop Control protocol
  9       If LES-EOC is supported, else not used.
  10-15   for future revisions of STR-VMOA-LES-01-00
  16-223  Bearer channels and ISDN D-channels
  224-255 set aside for vendor-specific usage
              
See STR-VMOA-LES-01-00 4.4 for allocation of CIDs
when ELCP is not used, allocation of CIDs when ELCP
is used, and implementation options for AAL2 CPS.
If the ELCP is not used, the default assignment of
CIDs to bearer channels and ISDN D-channels shall 
be as specified in this section.  These default
assignments may be overridden by provisioning or 
by management action.
              
POTS ports at the CP-IWF shall be numbered from 1 
to N, where N is the number of POTS ports that 
exist at the CP-IWF.  CID = 16 shall be assigned
to POTS port number 1, CID = 17 shall be assigned
to POTS port number 2, and so on up to POTS port 
number N.
              
For Jetstream applications, CID refers to port
number and the valid range is 1 to 255.
              
For non-Jetstream applications, the valid range
is 16 to 255.

MIB

ZhoneAAL2-MIB

OID

.1.3.6.1.4.1.5504.4.2.1.2.1.1

Type

column

Access

noaccess

Status

current

Parent

aal2CidEntry