xgs360028fACLACERowStatus
ZYXEL-XGS360028F-FUNCTION-MIB ·
.1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.66
Object
column
r/w
Integer32
1: active 2: notInservice 4: destroy 5: undo
Context
- MIB
- ZYXEL-XGS360028F-FUNCTION-MIB
- OID
.1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.66- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- xgs360028fACLACEEntry
- Table
- xgs360028fACLACETable
- Siblings
- 47
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-5
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xgs360028fACLACEIndex | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.1 |
| xgs360028fACLACELogging default: 0,
0: disable - Frames matching the ACE are not logged.
1: enable - Frames matching the ACE are stored in the system log. | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.10 |
| xgs360028fACLACERateLimiter default: 0,
0: Disable
range : 0 - 16 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.12 |
| xgs360028fACLACEShutdown default: 0,
0: disable - Port shut down is disabled for the AC.
1: enable - If a frame matches the ACE, the ingress port will be disabled. | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.13 |
| xgs360028fACLACEVLANTagPriority Specify the tag priority for this ACE.
The tag priority can't be set when 802.1Q Tagged is disabled
default: 8,
8: Any,
range : 0 - 8 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.15 |
| xgs360028fACLACEVLANVID Specify the VLAN ID filter for this ACE.
The vid can't be set when 802.1Q Tagged is disabled.
default: 0,
0: Any - No VLAN ID filter is specified.
range : 0 - 4094 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.16 |
| xgs360028fACLACEEtherType 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6).
range : 0 or 1536(0x0600)- 65535(0xffff). | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.17 |
| xgs360028fACLACESMAC Configure source MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this source MAC address value.
Any: Don't care. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.18 |
| xgs360028fACLACEDMACType DMAC Type.
default: 0,
0: Any - Don't care.
1: Broadcast - Frame must be broadcast.
2: Unicast - Frame must be unicast.
3: Multicast - Frame must be multicast.
4: mac address
rang… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.19 |
| xgs360028fACLACEID If the ACE ID is specified and an entry with this ACE ID
already exists, the ACE will be modified. Otherwise, a
new ACE will be added.
range : 1 - 256. | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.2 |
| xgs360028fACLACEDMAC Configure destination MAC address for this ACE.
<mac-address>: A frame that hits this ACE matches this destination MAC address value.
Any: Don't care.
Broadcast: Fram… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.20 |
| xgs360028fACLACEArpOpcode Configure ARP opcode for this ACE.
default: 0,
0: Any - Don't care.
1: arp.
2: rarp.
3: other.
4: No data.
range : 0 - 3 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.21 |
| xgs360028fACLACEArpFlagsRequestReply Specify the available ARP/RARP opcode (OP) flag for this ACE.
default: 2,
0: Frame must have ARP Reply or RARP Reply OP flag.
1: Frame must have ARP Request or RARP Request OP fla… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.22 |
| xgs360028fACLACEArpFlagsArpSmac Specify whether frames can hit the action according to their sender hardware address field (SHA) settings.
default: 2,
0: ARP frames where SHA is not equal to the SMAC address.
1:… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.23 |
| xgs360028fACLACEArpFlagsRarpDmac Specify whether frames can hit the action according to their target hardware address field (THA) settings.
default: 2,
0: RARP frames where THA is not equal to the DMAC address.
1… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.24 |
| xgs360028fACLACEArpFlagsLength Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and
protocol address length (PLN) settings.
default: 2,
0: ARP/RARP frames wher… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.25 |
| xgs360028fACLACEArpFlagsIp Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings.
default: 2,
0: ARP/RARP frames where the HLD is not equal to Ethernet(… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.26 |
| xgs360028fACLACEArpFlagsEthernet Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings.
default: 2,
0: ARP/RARP frames where the PRO is not equal to IP\n(0x80… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.27 |
| xgs360028fACLACESIPType Configure source IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.28 |
| xgs360028fACLACESIPIPAddress A frame that hits this ACE matches this source IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.29 |
| xgs360028fACLACENextID If the next ACE ID is non zero, the ACE will be placed
before this ACE in the list. If the next ACE ID is zero,
the ACE will be placed last in the list.
range : 0 - 256. | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.3 |
| xgs360028fACLACESIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.30 |
| xgs360028fACLACEDIPType Configure destination IP address for this ACE.
default: 0,
0: Any - Don't care.
1: IP Address.
2: No data.
range : 0 - 1 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.32 |
| xgs360028fACLACEDIPIPAddress A frame that hits this ACE matches this destination IP address value. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.33 |
| xgs360028fACLACEDIPNetworkPrefix Network prefix.
default: 32,
0: No data.
range : 1 - 32 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.34 |
| xgs360028fACLACEIPProtocol Configure IP protocol for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.36 |
| xgs360028fACLACEIPFlagsTTL Configure IP Time-to-Live flags for this ACE.
default: 2,
0: IPv4 frames with a Time-to-Live field is equal to zero.
1: IPv4 frames with a Time-to-Live field greater than zero.
2:… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.37 |
| xgs360028fACLACEIPFlagsOptions Configure IP options flag for this ACE.
default: 2,
0: IPv4 frames where the options flag is unset.
1: IPv4 frames where the options flag is set.
2: Any - Don't care.
3: No data.
… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.38 |
| xgs360028fACLACEIPFlagsFragment Configure IP fragment offset flags for this ACE.
default: 2,
0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero.
1: IPv4 frames where the MF bit is s… | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.39 |
| xgs360028fACLACEIngressPort Indicates the ingress port of the ACE. Possible values are:
All: The ACE will match all ingress port.
Port: The ACE will match a specific ingress port.Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.4 |
| xgs360028fACLACEICMPType Configure ICMP type for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.40 |
| xgs360028fACLACEICMPCode Configure ICMP code for this ACE.
default: 256,
256: Any - Don't care.
257: No data.
range : 0 - 256 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.41 |
| xgs360028fACLACESourcePortMin Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.42 |
| xgs360028fACLACESourcePortMax Configure Source UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.43 |
| xgs360028fACLACEDestPortMin Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.44 |
| xgs360028fACLACEDestPortMax Configure Destination UDP/TCP port range for this ACE.
default: 0,
65536: No data.
range : 0 - 65535 | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.45 |
| xgs360028fACLACETCPFlagsFin Configure TCP (FIN) flags for this ACE.
default: 2,
0: TCP frames where the FIN field is unset.
1: TCP frames where the FIN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.46 |
| xgs360028fACLACETCPFlagsSyn Configure TCP (SYN) flags for this ACE.
default: 2,
0: TCP frames where the SYN field is unset.
1: TCP frames where the SYN field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.47 |
| xgs360028fACLACETCPFlagsRst Configure TCP (RST) flags for this ACE.
default: 2,
0: TCP frames where the RST field is unset.
1: TCP frames where the RST field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.48 |
| xgs360028fACLACETCPFlagsPsh Configure TCP (PSH) flags for this ACE.
default: 2,
0: TCP frames where the PSH field is unset.
1: TCP frames where the PSH field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.49 |
| xgs360028fACLACEPortPolicyNumber policy value.
range : 0 - 255. | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.5 |
| xgs360028fACLACETCPFlagsAck Configure TCP (ACK) flags for this ACE.
default: 2,
0: TCP frames where the ACK field is unset.
1: TCP frames where the ACK field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.50 |
| xgs360028fACLACETCPFlagsUrg Configure TCP (URG) flags for this ACE.
default: 2,
0: TCP frames where the URG field is unset.
1: TCP frames where the URG field is set.
2: Any - Don't care.
3: No data.
range : … | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.51 |
| xgs360028fACLACEPortPolicyBitmask policy bitmask.
range : 0 - 255(0xff). | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.6 |
| xgs360028fACLACEFrameType 0: any,
1: arp,
2: etype,
3: icmp,
4: ipv4,
5: tcp,
6: udp. | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.7 |
| xgs360028fACLACEAction default: 1,
0: Deny
1: Permit | column | Integer32 | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.8 |
| xgs360028fACLACEDenyPortRedirect Frames that hit the ACE are redirected to the port number specified here.
Disabled: indicates that the port redirect operation is disabled.
Port Format: 1,3,6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.890.1.5.8.78.2.9.3.2.1.9 |