maintenanceDSLConfRateMode

ZYXEL-VES1608FE53A-MIB · .1.3.6.1.4.1.890.1.5.12.42.11.90.16

MIB view Table view

Object

scalar r/w Enumeration

Defines what form of transmit rate adaptation is
configured on this modem.  See ADSL Forum TR-005 [3]
for more information.

Context

MIB: ZYXEL-VES1608FE53A-MIB
OID: .1.3.6.1.4.1.890.1.5.12.42.11.90.16
Type: scalar
Access: readwrite
Status: current
Parent: sysMaintain
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	enable
`2`	disable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
maintenanceOps The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value…	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.1`
maintenanceDSLConfMacCount The configuration defines the number of mac addresses which can pass through the port.	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.10`
maintenanceVpi VPI of the channel	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.11`
maintenanceVci VCI of the channel	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.12`
maintenanceDSLConfAlarmProfileName The DSL alarm profile name	scalar	OctetString	`.1.3.6.1.4.1.890.1.5.12.42.11.90.13`
maintenanceDSLConfAnnexL The annex L setting of the ADSL line (Only in AnnexA).	scalar	Enumeration	`.1.3.6.1.4.1.890.1.5.12.42.11.90.14`
maintenanceDSLConfPmMode The power management mode of the ADSL line.	scalar	Enumeration	`.1.3.6.1.4.1.890.1.5.12.42.11.90.15`
maintenanceDSLConfIgmpFilter The IGMP filter name.	scalar	OctetString	`.1.3.6.1.4.1.890.1.5.12.42.11.90.17`
maintenanceTarget The managed object is used for identify the target on which the maintenance operation should be performed.	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.2`
maintenanceDSLConfOps The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be …	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.3`
maintenanceDSLConfTarget The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1~6: each octet specifies a set of eight por…	scalar	OctetString	`.1.3.6.1.4.1.890.1.5.12.42.11.90.4`
maintenanceDSLConfProfileName The DSL profile name	scalar	OctetString	`.1.3.6.1.4.1.890.1.5.12.42.11.90.5`
maintenanceDSLConfMode The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7: ADSL2+	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.6`
maintenanceDSLConfPktFilter The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: rej…	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.7`
maintenanceDSLConfDot1xControl The configuration defines the 802.1x control type.	scalar	Enumeration	`.1.3.6.1.4.1.890.1.5.12.42.11.90.8`
maintenanceDSLConfDot1xReauthPeriod The configuration defines the 802.1x re-authentication period (seconds).	scalar	Integer32	`.1.3.6.1.4.1.890.1.5.12.42.11.90.9`