maintenanceDSLConfAlarmProfileName
ZYXEL-VES1608FE53A-MIB ·
.1.3.6.1.4.1.890.1.5.12.42.11.90.13
Object
scalar
r/w
OctetString
The DSL alarm profile name
Context
- MIB
- ZYXEL-VES1608FE53A-MIB
- OID
.1.3.6.1.4.1.890.1.5.12.42.11.90.13- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sysMaintain
- Siblings
- 16
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| maintenanceOps The managed object is for system maintenance. When the EMS
wants to trigger the system maitenance operation, the EMS
shall send SNMP-SET message to set the corresponding bit value… | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.1 |
| maintenanceDSLConfMacCount The configuration defines the number of mac addresses which can pass through the port. | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.10 |
| maintenanceVpi VPI of the channel | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.11 |
| maintenanceVci VCI of the channel | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.12 |
| maintenanceDSLConfAnnexL The annex L setting of the ADSL line (Only in AnnexA). | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.12.42.11.90.14 |
| maintenanceDSLConfPmMode The power management mode of the ADSL line. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.12.42.11.90.15 |
| maintenanceDSLConfRateMode Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.12.42.11.90.16 |
| maintenanceDSLConfIgmpFilter The IGMP filter name. | scalar | OctetString | .1.3.6.1.4.1.890.1.5.12.42.11.90.17 |
| maintenanceTarget The managed object is used for identify the target on which
the maintenance operation should be performed. | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.2 |
| maintenanceDSLConfOps The managed object is for xDSL line configuration. When the EMS
wants to issue the desired operation, the EMS
shall send SNMP-SET message to set the corresponding bit value
to be … | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.3 |
| maintenanceDSLConfTarget The managed object is used for identify the target on which
the line configuration should be performed. The target is encoded
as:
Byte 1~6: each octet specifies a set of eight por… | scalar | OctetString | .1.3.6.1.4.1.890.1.5.12.42.11.90.4 |
| maintenanceDSLConfProfileName The DSL profile name | scalar | OctetString | .1.3.6.1.4.1.890.1.5.12.42.11.90.5 |
| maintenanceDSLConfMode The DSL mode. The semantic for each bit is:
Bit 1: ADSL, G.lite
Bit 2: ADSL, G.dmt
Bit 3: ADSL, T1.413
Bit 4: ADSL, Auto
Bit 5: ADSL, ETSI
Bit 6: ADSL2,
Bit 7: ADSL2+ | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.6 |
| maintenanceDSLConfPktFilter The packet filter. The semantic for each bit is:
Bit 1: accept all
Bit 2: accept PPPoE only
Bit 3: reject ARP
Bit 4: reject DHCP
Bit 5: reject EAPOL
Bit 6: reject PPPoE
Bit 7: rej… | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.7 |
| maintenanceDSLConfDot1xControl The configuration defines the 802.1x control type. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.12.42.11.90.8 |
| maintenanceDSLConfDot1xReauthPeriod The configuration defines the 802.1x re-authentication period (seconds). | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.12.42.11.90.9 |