adslLineConfOptionMask
ZYXEL-IES1248 ·
.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.5
Object
column
r/w
Integer32
The semantic for each bit is: BIT 1 : Disable Trellis BIT 2 : Disable Reed-Solomon BIT 3 : Disable upstream bitswap BIT 4 : Disable downstream bitswap BIT 5 : Disable 1-bit constellation BIT 6 : Disable transmit windowing BIT 7 : Disable s=0.5 support (ADSL1 only) BIT 8 : Disable G.lite rate limit (ADSL1 only)
Context
- MIB
- ZYXEL-IES1248
- OID
.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adslLineConfEntry
- Table
- adslLineConfTable
- Siblings
- 21
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adslLineConfAdslMode G.lite and T1.413 are only applicable to annex A board.
ETSI is only applicable to annex B board. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.1 |
| adslLineConfMaxRxPower The maximum aggregate received power. | column | tenth dBm Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.10 |
| adslLineConfAturCarrierMask The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31;
CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
Bit set to 1 indicates the … | column | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.11 |
| adslLineConfAtucCarrierMask0 The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255;
CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255.
Bit set to 1 indica… | column | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.12 |
| adslLineConfAtucCarrierMask1 The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates
the bin is masked off. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.13 |
| adslLineConfAturInp The upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
For CTLM solution, user can set value from 1 ~ 4,
but for BCM solution, user can set value from 1 ~ 7. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.14 |
| adslLineConfAtucInp The downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
For CTLM solution, user can set value from 1 ~ 4,
but for BCM solution, user can set value from 1 ~ … | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.15 |
| adslLineConfL0Time Set the minimum time in seconds that the ADSL line
must stay in L0 power mode before changing to the L2 power mode.
For CTLM solution, the range is 120 ~ 65535;
for BCM solution,… | column | Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.16 |
| adslLineConfL2Time Set minimum time in seconds that the ADSL line must stay in the
L2 power mode before reducing the power again in the L2 power mode.
For CTLM solution, the range is 60 ~ 65535;
fo… | column | Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.17 |
| adslLineConfL2ATPR Set the maximum Aggregate Transmit Power Reduction (ATPR)
in decibels (dB) that is permitted in a L2 power reduction.
The system can gradually decrease the ADSL line transmission … | column | dB Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.18 |
| adslLineConfL2ATPRT the maximum Aggregate Transmit Power Reduction Total (ATPRT)
in decibels (dB) that is permitted in the L2 power mode.
This is the total transmit power decrease that is allowed
to … | column | dB Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.19 |
| adslLineConfAnnexL Enable/disable annex L for the port(Only in AnnexA). | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.2 |
| adslLineConfMaxL2Rate configured maximum L2 rate.
(32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.) | column | kbps Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.20 |
| adslLineConfMinL2Rate configured minimum L2 rate.
(32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.) | column | kbps Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.21 |
| adslLineConfL0toL2Rate configured transition L0 to L2 rate.
(<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.) | column | kbps Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.22 |
| adslLineConfAnnexM Enable/disable annex M for the port(For BCM AnnexA solution). | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.3 |
| adslLineConfAnnexI Enable/disable annex I for the port(For BCM AnnexA solution). | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.4 |
| adslLineConfPowerMgmt Enable/disable power management for the port. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.6 |
| adslLineConfPowerMode The power mode of the ADSL line. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.7 |
| adslLineConfAturMaxTxPower The maximum allowed transmit power of ATU-R. | column | tenth dBm Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.8 |
| adslLineConfAtucMaxTxPower The maximum allowed transmit power of ATU-C. | column | tenth dBm Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.9 |