adslLineConfL2ATPRT

ZYXEL-IES1248 · .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.19

Object

column r/w dB Integer32

the maximum Aggregate Transmit Power Reduction Total (ATPRT)
in decibels (dB) that is permitted in the L2 power mode.
This is the total transmit power decrease that is allowed
to occur in the L2 power mode.
For CTLM solution, the range is 1 ~ 40(dB);
for BCM solution, the range is 0 ~ 15(dB).

Context

MIB: ZYXEL-IES1248
OID: .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.19
Type: column
Access: readwrite
Status: current
Units: dB
Parent: adslLineConfEntry
Table: adslLineConfTable
Siblings: 21

Syntax

dB Integer32

Source: COPS-PR-SPPIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adslLineConfAdslMode G.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.1`
adslLineConfMaxRxPower The maximum aggregate received power.	column	tenth dBm Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.10`
adslLineConfAturCarrierMask The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31; CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. Bit set to 1 indicates the …	column	OctetString	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.11`
adslLineConfAtucCarrierMask0 The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255; CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255. Bit set to 1 indica…	column	OctetString	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.12`
adslLineConfAtucCarrierMask1 The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off.	column	OctetString	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.13`
adslLineConfAturInp The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.14`
adslLineConfAtucInp The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ …	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.15`
adslLineConfL0Time Set the minimum time in seconds that the ADSL line must stay in L0 power mode before changing to the L2 power mode. For CTLM solution, the range is 120 ~ 65535; for BCM solution,…	column	Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.16`
adslLineConfL2Time Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; fo…	column	Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.17`
adslLineConfL2ATPR Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission …	column	dB Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.18`
adslLineConfAnnexL Enable/disable annex L for the port(Only in AnnexA).	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.2`
adslLineConfMaxL2Rate configured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)	column	kbps Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.20`
adslLineConfMinL2Rate configured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)	column	kbps Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.21`
adslLineConfL0toL2Rate configured transition L0 to L2 rate. (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)	column	kbps Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.22`
adslLineConfAnnexM Enable/disable annex M for the port(For BCM AnnexA solution).	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.3`
adslLineConfAnnexI Enable/disable annex I for the port(For BCM AnnexA solution).	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.4`
adslLineConfOptionMask The semantic for each bit is: BIT 1 : Disable Trellis BIT 2 : Disable Reed-Solomon BIT 3 : Disable upstream bitswap BIT 4 : Disable downstream bitswap BIT 5 : Disable 1-bit conste…	column	Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.5`
adslLineConfPowerMgmt Enable/disable power management for the port.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.6`
adslLineConfPowerMode The power mode of the ADSL line.	column	Enumeration	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.7`
adslLineConfAturMaxTxPower The maximum allowed transmit power of ATU-R.	column	tenth dBm Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.8`
adslLineConfAtucMaxTxPower The maximum allowed transmit power of ATU-C.	column	tenth dBm Integer32	`.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.9`