adslLineConfL2ATPR

ZYXEL-IES1248 · .1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.18
MIB view Table view

Object

column r/w dB Integer32 
Set the maximum Aggregate Transmit Power Reduction (ATPR)
in decibels (dB) that is permitted in a L2 power reduction.
The system can gradually decrease the ADSL line transmission power
while it is in the L2 power mode. This is the largest individual
power reduction allowed in the L2 power mode.
For CTLM solution, the range is 1 ~ 5(dB);
for BCM solution, the range is 0 ~ 15(dB).

Context

MIB
ZYXEL-IES1248
OID
.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.18
Type
column
Access
readwrite
Status
current
Units
dB
Parent
adslLineConfEntry
Table
adslLineConfTable
Siblings
21

Syntax

dB Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adslLineConfAdslMode
G.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.
columnEnumeration.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.1
adslLineConfMaxRxPower
The maximum aggregate received power.
columntenth dBm Integer32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.10
adslLineConfAturCarrierMask
The upstream carrier mask. For CTLM AnnexA solution, bin is from 0 to 31; CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63. Bit set to 1 indicates the …
columnOctetString.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.11
adslLineConfAtucCarrierMask0
The downstream carrier mask. For CTLM AnnexA solution, bin is from 32 to 255; CTLM AnnexB solution, bin is from 64 to 255; BCM solution, bin is from 32 to 255. Bit set to 1 indica…
columnOctetString.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.12
adslLineConfAtucCarrierMask1
The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off.
columnOctetString.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.13
adslLineConfAturInp
The upstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7.
columnEnumeration.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.14
adslLineConfAtucInp
The downstream Impulse Noise Protection minimum setting in unit of DMT symbol. For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ …
columnEnumeration.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.15
adslLineConfL0Time
Set the minimum time in seconds that the ADSL line must stay in L0 power mode before changing to the L2 power mode. For CTLM solution, the range is 120 ~ 65535; for BCM solution,…
columnInteger32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.16
adslLineConfL2Time
Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; fo…
columnInteger32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.17
adslLineConfL2ATPRT
the maximum Aggregate Transmit Power Reduction Total (ATPRT) in decibels (dB) that is permitted in the L2 power mode. This is the total transmit power decrease that is allowed to …
columndB Integer32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.19
adslLineConfAnnexL
Enable/disable annex L for the port(Only in AnnexA).
columnEnumeration.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.2
adslLineConfMaxL2Rate
configured maximum L2 rate. (32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.)
columnkbps Integer32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.20
adslLineConfMinL2Rate
configured minimum L2 rate. (32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.)
columnkbps Integer32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.21
adslLineConfL0toL2Rate
configured transition L0 to L2 rate. (<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.)
columnkbps Integer32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.22
adslLineConfAnnexM
Enable/disable annex M for the port(For BCM AnnexA solution).
columnEnumeration.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.3
adslLineConfAnnexI
Enable/disable annex I for the port(For BCM AnnexA solution).
columnEnumeration.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.4
adslLineConfOptionMask
The semantic for each bit is: BIT 1 : Disable Trellis BIT 2 : Disable Reed-Solomon BIT 3 : Disable upstream bitswap BIT 4 : Disable downstream bitswap BIT 5 : Disable 1-bit conste…
columnInteger32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.5
adslLineConfPowerMgmt
Enable/disable power management for the port.
columnEnumeration.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.6
adslLineConfPowerMode
The power mode of the ADSL line.
columnEnumeration.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.7
adslLineConfAturMaxTxPower
The maximum allowed transmit power of ATU-R.
columntenth dBm Integer32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.8
adslLineConfAtucMaxTxPower
The maximum allowed transmit power of ATU-C.
columntenth dBm Integer32.1.3.6.1.4.1.890.1.5.13.6.8.2.1.1.9