adslL2ATPRTForBatchSet
ZYXEL-IES1248 ·
.1.3.6.1.4.1.890.1.5.13.6.8.2.3.19
Object
scalar
r/w
dB Integer32
the maximum Aggregate Transmit Power Reduction Total (ATPRT) in decibels (dB) that is permitted in the L2 power mode. This is the total transmit power decrease that is allowed to occur in the L2 power mode. For CTLM solution, the range is 1 ~ 40(dB); for BCM solution, the range is 0 ~ 15(dB).
Context
- MIB
- ZYXEL-IES1248
- OID
.1.3.6.1.4.1.890.1.5.13.6.8.2.3.19- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- dB
- Parent
- adslPortBatchSet
- Siblings
- 21
Syntax
dB Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adslPortTarget The managed object is used for identify the target on which
the port configuration should be performed. The target is encoded as:
Byte 1: 0, Reserved(chaises)
Byte 2~3: 0,0 Rese… | scalar | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.1 |
| adslMaxRxPowerForBatchSet The maximum aggregate received power. | scalar | tenth dBm Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.10 |
| adslAturCarrierMaskForBatchSet The upstream carrier mask.For CTLM AnnexA solution, bin is from 0 to 31;
CTLM AnnexB solution, bin is from 0 to 63; BCM solution, bin is from 0 to 63.
Bit set to 1 indicates the b… | scalar | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.11 |
| adslAtucCarrierMask0ForBatchSet The downstream carrier mask from bin 32 to 255. Bit set to 1 indicates
the bin is masked off. | scalar | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.12 |
| adslAtucCarrierMask1ForBatchSet The downstream carrier mask from bin 256 to 511. Bit set to 1 indicates
the bin is masked off. | scalar | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.13 |
| adslAturInpForBatchSet The upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ 7. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.14 |
| adslAtucInpForBatchSet The downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
For CTLM solution, user can set value from 1 ~ 4, but for BCM solution, user can set value from 1 ~ … | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.15 |
| adslL0TimeForBatchSet Set the minimum time in seconds that the ADSL line
must stay in L0 power mode before changing to the L2 power mode.
For CTLM solution, the range is 120 ~ 65535; for BCM solution, … | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.16 |
| adslL2TimeForBatchSet Set minimum time in seconds that the ADSL line
must stay in the L2 power mode before reducing the power
again in the L2 power mode.
For CTLM solution, the range is 60 ~ 65535; for… | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.17 |
| adslL2ATPRForBatchSet Set the maximum Aggregate Transmit Power Reduction (ATPR)
in decibels (dB) that is permitted in a L2 power reduction.
The system can gradually decrease the ADSL line transmission … | scalar | dB Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.18 |
| adslPortOps The managed object is for ADSL line configuration. When the EMS
wants to issue the desired operation, the EMS shall send SNMP-SET message to set
the corresponding bit value to be … | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.2 |
| adslMaxL2RateForBatchSet configured maximum L2 rate.
(32~4096 Kbps, 4 Kbps resolution. For CTLM solution, 0 for system assign; for BCM solution, default:4096.) | scalar | kbps Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.20 |
| adslMinL2RateForBatchSet configured minimum L2 rate.
(32~4096 Kbps, 4 Kbps resolution, For CTLM solution, 0 for system assign; for BCM solution, default:32.) | scalar | kbps Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.21 |
| adslL0toL2RateForBatchSet configured transition L0 to L2 rate.
(<=min_l2rate/2 and >= 16 Kbps, For CTLM solution, 0 for system assign; for BCM solution, default:16.) | scalar | kbps Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.22 |
| adslPortOps2 The managed object is for ADSL line configuration. When the EMS
wants to issue the desired operation, the EMS shall send SNMP-SET message to set
the corresponding bit value to be … | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.3 |
| adslModeForBatchSet G.lite and T1.413 are only applicable to annex A board.
ETSI is only applicable to annex B board. | scalar | Enumeration | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.4 |
| adslLineProfileForBatchSet The ADSL line profile. | scalar | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.5 |
| adslAlarmProfileForBatchSet The ADSL alarm profile. | scalar | OctetString | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.6 |
| adslOptionMaskForBatchSet The semantic for each bit is identical to the object adslLineConfOptionMask. | scalar | Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.7 |
| adslAturMaxTxPowerForBatchSet The maximum allowed transmit power of ATU-R. | scalar | tenth dBm Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.8 |
| adslAtucMaxTxPowerForBatchSet The maximum allowed transmit power of ATU-C. | scalar | tenth dBm Integer32 | .1.3.6.1.4.1.890.1.5.13.6.8.2.3.9 |