zyAaaAccountingTypeName – ZYXEL-AAA-MIB

Object

column SNMPv2-TCDisplayString

'System' means the switch will send information when the following 
system events occur: system boots up, system shuts down, system 
accounting is enabled, and system accounting is disabled. 
'Exec' means the switch will send information when an administrator 
logs in and logs out via the console port, telnet or SSH. 
'Dot1x' means the switch will send information when an IEEE 802.1x 
client begins a session (authenticates via the switch), ends a session 
	 as well as interim updates of a session. 
'Commands' means the switch to send information when commands of specified 
privilege level and higher are executed on the switch.

Context

MIB: ZYXEL-AAA-MIB
OID: .1.3.6.1.4.1.890.1.15.3.94.1.3.2.1.1
Type: column
Access: noaccess
Status: current
Parent: zyxelAaaAccountingTypeEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZYXEL-AAA-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAA-MIB::zyAaaAccountingTypeName'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ZYXEL-AAA-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZYXEL-AAA-MIB::zyAaaAccountingTypeName.<zyAaaAccountingTypeName>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'ZYXEL-AAA-MIB' -M '/opt/observium/mibs/zyxel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZYXEL-AAA-MIB::zyAaaAccountingTypeName'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints

range: 0..255