dot3ExtPkgObjectFecEnabled

An object defining the FEC mode of operation of the interface, and 
indicating its state. The modes defined in this object are extensions 
to the FEC modes defined in the dot3EponFecMode object. When noFECEnabled 
(1) the interface does not enable FEC mode. When fecTxEnabled (2) the 
interface enables the FEC transmit mode. When fecRxEnabled (3) the 
interface enables the FEC receive mode. When fecTxRxEnabled (4) the 
interface enables the FEC transmit and receive mode. This object is 
applicable for an OLT and an ONU. At the OLT it has a distinct value 
for each virtual interface. The FEC counters are referring to the 
receive path. The FEC counters will stop when the FEC receive mode 
of the interface is disabled, as defined by fecRxEnabled (3) and 
fecTxRxEnabled (4) values. The counters: dot3EponFecPCSCodingViolation 
- not affected by FEC mode. dot3EponFecCorrectedBlocks - stops counting 
when Rx_FEC is not enabled. (noFecEnabled (1) and fecTxEnabled (2)). 
dot3EponFecUncorrectableBlocks - stops counting when Rx_FEC is not enabled 
(noFecEnabled (1) and fecTxEnabled (2)). dot3EponFecBufferHeadCodingViolation
 - stops counting when Rx_FEC is not enabled (noFecEnabled (1) and 
 fecTxEnabled (2)). The objects: dot3EponFecAbility - indicates the FEC 
 ability and is not affected by the FEC mode. dot3EponFecMode - indicates 
 the FEC mode for combined RX and TX. The write operation is not restricted 
 in this document and can be done at any time. Changing dot3ExtPkgObjectFecEnabled 
 state can lead to disabling the Forward error correction on the respective 
 interface which can lead to a degradation of the optical link and therefore 
 may lead to an interruption of service of the users connected to the 
 respective EPON interface.

MIB

ZXEPON-SERVICE-MIB

OID

.1.3.6.1.4.1.3902.1015.1010.1.5.1.1.1.4

Type

column

Access

readwrite

Status

current

Parent

dot3ExtPkgControlEntry