zxAnPonSrvWhitelistRule – ZTE-AN-PON-SERVICE-MIB

Object

column SNMPv2-TCDisplayString

PON whitelist rule. Whitelist rule can be a specified 
SN/MAC or SN/MAC range(GPON uses SN, EPON uses MAC). 
'*' or '[begin-end]' can be used in SN/MAC string to 
represent a range. Each '*' or '[begin-end]' represents
only one legal character of the whiltelist rule. '*' 
represents all legal characters, in MAC it represents '0' 
to 'f', in SN it represents '0' to '9'. For example:
GPON SN 
  ZTEG0001000[1-9] represents ZTEG00010001 to ZTEG00010009; 
  ZTEG0001000* represents ZTEG00010000 to ZTEG00010009;
  ZTEG000100** represents ZTEG00010000 to ZTEG00010099;
EPON MAC
  00d0d02505** represents 00d0d0250500 to 00d0d02505ff.
  00d0d02505[1-7]* represents 00d0d0250510 to 00d0d025057f.

Context

MIB: ZTE-AN-PON-SERVICE-MIB
OID: .1.3.6.1.4.1.3902.1082.500.2.2.5.2.1.2
Type: column
Access: noaccess
Status: current
Parent: zxAnPonSrvWhitelistEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-PON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PON-SERVICE-MIB::zxAnPonSrvWhitelistRule'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ZTE-AN-PON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-PON-SERVICE-MIB::zxAnPonSrvWhitelistRule.<zxAnPonSrvWhitelistType>.<zxAnPonSrvWhitelistRule>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'ZTE-AN-PON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZTE-AN-PON-SERVICE-MIB::zxAnPonSrvWhitelistRule'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Object Constraints

range: 1-128

Type Constraints

range: 0..255