zhoneSystemConfigurationOptions

ZHONE-SYSTEM-MIB · .1.3.6.1.4.1.5504.3.1.5.21
MIB view Table view

Object

scalar r/w Bits 
System options in bit-mask format.

Context

MIB
ZHONE-SYSTEM-MIB
OID
.1.3.6.1.4.1.5504.3.1.5.21
Type
scalar
Access
readwrite
Status
current
Parent
zhoneSystemConfiguration
Siblings
26

Syntax

Bits

Values & Constraints

Enumerated Values
0cvlanonly
1nol3bridgetable
2ipg88bits
3disdefpktrules
4enablexcardlinkagg
5fiberlan
6cfmon

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zhoneSystemConfigurationNumShelves
The number of shelves physically in the system
scalarshelves SNMPv2-SMIInteger32.1.3.6.1.4.1.5504.3.1.5.1
zhoneSystemCurrentClockSource
The current interface that is being used for the clock source. A value of 0 is returned if there are no available interfaces in the zhoneSystemClockTable that have a …
scalarIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.5504.3.1.5.10
zhoneSystemSecondaryClockSource
The interface that would next be used for the system clock source if the zhoneSystemCurrentClockSource becomes inactive, it's elgibility is changed,is being used for the clock sou…
scalarIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.5504.3.1.5.11
zhoneSystemClockTable
Table of physical ports that could be used as the clock source for other physical ports (i.e. DSL, DS1/DS3, and sonet). Entries are added to this table automatically by…
table-.1.3.6.1.4.1.5504.3.1.5.12
zhoneSystemConsoleLogging
An option to enable or disable logging of system messages onto the console.
scalarEnumeration.1.3.6.1.4.1.5504.3.1.5.13
zhoneSystemRevertiveClockSource
Indicates whether revertive behavior of the system clock is desired. If set to TRUE, the system will automatically revert to the higher weighted clock when it becomes available …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.3.1.5.14
zhoneSystemVoiceBandwidthCheck
Turns ON (true) of OFF (false) ATM bandwidth checks for new voice calls going through the system. The bandwidth check is based on the configuration of the Rx and Tx traffic descr…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.3.1.5.15
zhoneAlarmLevelsEnabled
Bit field indicating which combination of the 4 alarm levels are enabled. User can disable alarms based on alarm severity level.
scalarBits.1.3.6.1.4.1.5504.3.1.5.16
zhoneSystemUserAuthMethod
This object determines how users access to the device is authenticated. A value of local indicates that user should be authenticated using locally provisioned user-profile profile…
scalarEnumeration.1.3.6.1.4.1.5504.3.1.5.17
zhoneSystemRadiusAuthIndex
This object contains the index of the Radius Server profile to be used if RADIUS authentication is desired.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.5504.3.1.5.18
zhoneSystemSecureFTP
Secure FTP (SFTP) control.
scalarEnumeration.1.3.6.1.4.1.5504.3.1.5.19
zhoneSystemConfigurationShelvesArray
Bit array from 0-255 (32 8-bit bytes) that are present in the system.
scalarOctetString.1.3.6.1.4.1.5504.3.1.5.2
zhoneSystemWebInterface
Specifies whether the Web GUI Interface is enabled for this system.
scalarEnumeration.1.3.6.1.4.1.5504.3.1.5.20
zhoneSystemConfigurationReservedVlanIdStart
Starting VLAN ID of the reserved VLAN ID block. The reserved VLAN ID block starts with the reservedVlanIdStart and ends with reservedVlanIdStart + reservedVlanIdCount; …
scalarUnsigned32.1.3.6.1.4.1.5504.3.1.5.22
zhoneSystemConfigurationReservedVlanIdCount
Number of reserved VLAN IDs in the reserved VLAN ID block. A zero value disables these reserved VLANs and operation reverts to normal VLAN ID reservation. Th…
scalarUnsigned32.1.3.6.1.4.1.5504.3.1.5.23
zhoneSystemSnmpVersion
Version of SNMP the supported by the device.
scalarEnumeration.1.3.6.1.4.1.5504.3.1.5.24
zhoneSystemPersistentLogging
An option to enable or disable persistent logging of system messages onto the console.
scalarEnumeration.1.3.6.1.4.1.5504.3.1.5.25
zhoneSystemOutletTemperatureHighThreshold
Specifies the outlet sensor high temperature threshold. Minor, Major & Critical alarms will be raised when outlet sensor temperature reaches X, X+5 & X+10 respectively. X is the…
scalarInteger32.1.3.6.1.4.1.5504.3.1.5.26
zhoneSystemOutletTemperatureLowThreshold
Specifies the outlet sensor low temperature threshold. Minor alarm will be raised when outlet sensor reaches the temperatue configured in this field
scalarInteger32.1.3.6.1.4.1.5504.3.1.5.27
zhoneSystemConfigurationNumCards
The total number of cards in the system (physcially). The number per shelf is defined in the shelf mib.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.5504.3.1.5.3
zhoneSystemConfigurationIpAddress
The IP address of this device. Independent of the different IP interfaces configured and what is active,a manager uses this address as how to address the device. This address may …
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.3.1.5.4
zhoneSystemConfigurationAlternateIpAddress
A second IP address of this device. Independent of the different IP interfaces configured and what is active,a manager uses this address as how to address the device. This address…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.3.1.5.5
zhoneSystemConfigurationDateAndTime
The date and time of the system, specified in local time. Only a community name having 'admin' priviledges will be allowed to modify this value. Although any valid comm…
scalarSNMPv2-TCDateAndTime.1.3.6.1.4.1.5504.3.1.5.6
zhoneSystemConfigurationCountryRegion
The country or region where this system is operating in. This variable is used to adjust system settings for different functional modules. For example, both DSP tones and TDM comp…
scalarZhone-TCZhoneCountryCode.1.3.6.1.4.1.5504.3.1.5.7
zhonePrimaryClockSource deprecated
The ifIndex of the interface from which clock can be derived. Only oc3, ds1, and ds3 interfaces can be used for this. This interface wil…
scalarIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.5504.3.1.5.8
zhoneSystemConfigurationRingSource
Ring voltage source selection (internal or external): (1)Select internal ring generator (located within TAC) as source for ring voltage to line cards. (2) Select external ring g…
scalarEnumeration.1.3.6.1.4.1.5504.3.1.5.9