zhoneSystemConfigurationNumCards
ZHONE-SYSTEM-MIB ·
.1.3.6.1.4.1.5504.3.1.5.3
Object
scalar
SNMPv2-SMIInteger32
The total number of cards in the system (physcially). The number per shelf is defined in the shelf mib.
Context
- MIB
- ZHONE-SYSTEM-MIB
- OID
.1.3.6.1.4.1.5504.3.1.5.3- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- zhoneSystemConfiguration
- Siblings
- 26
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneSystemConfigurationNumShelves The number of shelves physically in the system | scalar | shelves SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.3.1.5.1 |
| zhoneSystemCurrentClockSource The current interface that is being used for the clock source.
A value of 0 is returned if there are no available interfaces
in the zhoneSystemClockTable that have a
… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.3.1.5.10 |
| zhoneSystemSecondaryClockSource The interface that would next be used for the system clock source
if the zhoneSystemCurrentClockSource becomes inactive,
it's elgibility is changed,is being used for the clock sou… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.3.1.5.11 |
| zhoneSystemClockTable Table of physical ports that could be used as the clock
source for other physical ports (i.e. DSL, DS1/DS3, and sonet).
Entries are added to this table automatically by… | table | - | .1.3.6.1.4.1.5504.3.1.5.12 |
| zhoneSystemConsoleLogging An option to enable or disable logging of system messages onto the console. | scalar | Enumeration | .1.3.6.1.4.1.5504.3.1.5.13 |
| zhoneSystemRevertiveClockSource Indicates whether revertive behavior of the system clock is desired.
If set to TRUE, the system will automatically revert to the higher
weighted clock when it becomes available … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.3.1.5.14 |
| zhoneSystemVoiceBandwidthCheck Turns ON (true) of OFF (false) ATM bandwidth checks
for new voice calls going through the system. The
bandwidth check is based on the configuration of
the Rx and Tx traffic descr… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.3.1.5.15 |
| zhoneAlarmLevelsEnabled Bit field indicating which combination of the 4 alarm
levels are enabled. User can disable alarms based
on alarm severity level. | scalar | Bits | .1.3.6.1.4.1.5504.3.1.5.16 |
| zhoneSystemUserAuthMethod This object determines how users access to the device is authenticated.
A value of local indicates that user should be authenticated using
locally provisioned user-profile profile… | scalar | Enumeration | .1.3.6.1.4.1.5504.3.1.5.17 |
| zhoneSystemRadiusAuthIndex This object contains the index of the Radius Server profile to
be used if RADIUS authentication is desired. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.3.1.5.18 |
| zhoneSystemSecureFTP Secure FTP (SFTP) control. | scalar | Enumeration | .1.3.6.1.4.1.5504.3.1.5.19 |
| zhoneSystemConfigurationShelvesArray Bit array from 0-255 (32 8-bit bytes) that are
present in the system. | scalar | OctetString | .1.3.6.1.4.1.5504.3.1.5.2 |
| zhoneSystemWebInterface Specifies whether the Web GUI Interface is enabled for this system. | scalar | Enumeration | .1.3.6.1.4.1.5504.3.1.5.20 |
| zhoneSystemConfigurationOptions System options in bit-mask format. | scalar | Bits | .1.3.6.1.4.1.5504.3.1.5.21 |
| zhoneSystemConfigurationReservedVlanIdStart Starting VLAN ID of the reserved VLAN ID block.
The reserved VLAN ID block starts with the reservedVlanIdStart and
ends with reservedVlanIdStart + reservedVlanIdCount;
… | scalar | Unsigned32 | .1.3.6.1.4.1.5504.3.1.5.22 |
| zhoneSystemConfigurationReservedVlanIdCount Number of reserved VLAN IDs in the reserved VLAN ID block.
A zero value disables these reserved VLANs and operation
reverts to normal VLAN ID reservation.
Th… | scalar | Unsigned32 | .1.3.6.1.4.1.5504.3.1.5.23 |
| zhoneSystemSnmpVersion Version of SNMP the supported by the device. | scalar | Enumeration | .1.3.6.1.4.1.5504.3.1.5.24 |
| zhoneSystemPersistentLogging An option to enable or disable persistent logging of system messages onto the console. | scalar | Enumeration | .1.3.6.1.4.1.5504.3.1.5.25 |
| zhoneSystemOutletTemperatureHighThreshold Specifies the outlet sensor high temperature threshold.
Minor, Major & Critical alarms will be raised when
outlet sensor temperature reaches X, X+5 & X+10
respectively. X is the… | scalar | Integer32 | .1.3.6.1.4.1.5504.3.1.5.26 |
| zhoneSystemOutletTemperatureLowThreshold Specifies the outlet sensor low temperature threshold.
Minor alarm will be raised when outlet sensor reaches
the temperatue configured in this field | scalar | Integer32 | .1.3.6.1.4.1.5504.3.1.5.27 |
| zhoneSystemConfigurationIpAddress The IP address of this device. Independent of the
different IP interfaces configured and what is active,a manager
uses this address as how to address the device. This address
may … | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.3.1.5.4 |
| zhoneSystemConfigurationAlternateIpAddress A second IP address of this device. Independent of the
different IP interfaces configured and what is active,a manager
uses this address as how to address the device. This address… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.3.1.5.5 |
| zhoneSystemConfigurationDateAndTime The date and time of the system, specified in local time.
Only a community name having 'admin' priviledges will be
allowed to modify this value. Although any valid comm… | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.5504.3.1.5.6 |
| zhoneSystemConfigurationCountryRegion The country or region where this system is operating in. This
variable is used to adjust system settings for different
functional modules. For example, both DSP tones and TDM
comp… | scalar | Zhone-TCZhoneCountryCode | .1.3.6.1.4.1.5504.3.1.5.7 |
| zhonePrimaryClockSource deprecated The ifIndex of the interface from which clock can be derived.
Only oc3, ds1, and ds3 interfaces can be used for this.
This interface wil… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.3.1.5.8 |
| zhoneSystemConfigurationRingSource Ring voltage source selection (internal or external):
(1)Select internal ring generator (located within TAC)
as source for ring voltage to line cards.
(2) Select external ring g… | scalar | Enumeration | .1.3.6.1.4.1.5504.3.1.5.9 |