zhoneSysCardSpecificSwFileName
ZHONE-SYSTEM-MIB ·
.1.3.6.1.4.1.5504.3.1.10.1.1
Object
The file or code image name of the specific software
version that should be loaded by the unit/card for
operation. If a failure occurs when trying to boot
an upgrade version, the system will automatically
revert to a 'good' software version which is either
the zhoneSysCardSpecificSwFileName if non-NULL or the
default for this card type if it is NULL.
The operation will vary if the unit is a BAN card or
a standalone device.
BAN: In the case of a BAN the card will load the
indicated module and set cardSwStatus as appropriate.
If the cardSpecificFileName is set to NULL then the card
will load the image indicated by the
zhoneSoftwareLoadTable in the system mib.
STANDALONE: If the card is a Zedge,Sechtor, or similar
device, the system will first check if there is a local
copy of the code image indicated, if there is, the
card will load from the local copy. If the local copy
is not the same revision as zhoneSysCardSpecificSwFileName
the card will load this file.
Context
- MIB
- ZHONE-SYSTEM-MIB
- OID
.1.3.6.1.4.1.5504.3.1.10.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneSysCardSoftwareConfigEntry
- Table
- zhoneSysCardSoftwareConfigTable
- Siblings
- 13
Values & Constraints
Type Constraints
range: 0..64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneSysCardAtmConfiguration This field specifies how internal resources are distributed
between aal5 resources and aal2/cell relay resources based
on the core use of this card. This field is applicable fo… | column | Enumeration | .1.3.6.1.4.1.5504.3.1.10.1.10 |
| zhoneSysCardLineVoltage Sepcifies the voltage supplied to all lines (ports)
of this card, Used on ISDN line cards. | column | Enumeration | .1.3.6.1.4.1.5504.3.1.10.1.11 |
| zhoneSysCardVpiVciRange The maximum vpi and vci values that may be used for
this card. | column | Enumeration | .1.3.6.1.4.1.5504.3.1.10.1.12 |
| zhoneSysCardInitString Ascii string containing tokens separated by ',' or ' '
which is used to configure special non-standard operations.
This string is blank for normal operation. | column | OctetString | .1.3.6.1.4.1.5504.3.1.10.1.13 |
| zhoneSysCardWettingCurrent Sepcifies weather wetting current is disabled
or enabled(standard). | column | Enumeration | .1.3.6.1.4.1.5504.3.1.10.1.14 |
| zhoneSysCardSwSpecificVers The software version of the file name specified in
zhoneSysCardSpecificSwFileName.
If the revision is not known or the file name is
NULL, this should return an emp… | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.1.10.1.2 |
| zhoneSysCardUpgradeSwFileName The file name of the software version that should be
loaded by the unit/card into the upgrade region of
the card/unit memory or storage.
This file takes precenden… | column | Zhone-TCZhoneFileName | .1.3.6.1.4.1.5504.3.1.10.1.3 |
| zhoneSysCardSwUpgradeVers The software version specified in the zhoneSysCardUpgrade
FileName variable in this table that will be loaded
on the next card reboot.
This object complies to the … | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.1.10.1.4 |
| zhoneSysCardSwType The card type for the card in this shelf/slot.
When initially created, this value is defaulted to
'unknown'. When the card requests a load, the value in
this field … | column | Zhone-TCZhoneCardType | .1.3.6.1.4.1.5504.3.1.10.1.5 |
| zhoneSysCardSwEnable Whether or not the card has been enabled to be loaded.
If this value is false, no sw will be loaded, otherwise
the logic flow defined in the table description
will be exercised fo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.3.1.10.1.6 |
| zhoneSysCardSwUpgradeEnable This field indicates whether the zhoneSysCardUpgradeSwFileName
should be used as the software image when the card
requests a software load. This value can either be
set directly o… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.3.1.10.1.7 |
| zhoneSysCardRowStatus The row status used to create or delete an entry
for a card (i.e. shelf/slot). No entries are required
to be included in a table create as all entries have
default settings. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.3.1.10.1.8 |
| zhoneSysCardLineType This field is used to identify which line types for
different cards
For normal e1/t1 cards only t1 and e1 (uni mode)
line types are supported.
… | column | Zhone-TCZhoneCardLineType | .1.3.6.1.4.1.5504.3.1.10.1.9 |