zhoneSysCardAtmConfiguration

This field specifies how internal resources are distributed 
between aal5 resources and aal2/cell relay resources based 
on the core use of this card.  This field is applicable for BAN 
AtmTrnk, AtmAal25 and AtmTrnkCr Cards. For AtmAal25 card, it 
also specifies how much of the AAL2/Cell Relay BW will be utilized 
for RTVBR and UBR.
              
For AtmTrnkCr card valid value is cellRelayOnly. It implies
100% BW is available for cellRelay and none for AAL5. All 
cell relay traffic is RTVBR.
              
For AtmTrnk card valid values are cellRelayOnly, cellRelayAndManagement,
dataTerm, hybridLowAal5Data, hybridDefault and hybridHighAal5Data.
All cell relay traffic is RTVBR and all AAL5 traffic is UBR.
Out of total available BW on AtmTrnk card:
for cellRelayOnly Cell Relay BW is 100% and AAL5 BW is 0%. 
for cellRelayAndManagement Cell Relay BW is 95% and AAL5 BW is 5%.
for dataTerm Cell Relay BW is 5% and AAL5 BW is 95%.
for hybridLowAal5Data Cell Relay BW is 75% and AAL5 BW is 25%.
for hybridDefault Cell Relay BW is 60% and AAL5 BW is 40%.
for hybridHighAal5Data Cell Relay BW is 25% and AAL5 BW is 75%.
              
For AtmAal25 card valid values are cellRelayOnly, cellRelayAndManagement,
dataTerm, voiceGateway, hybridLowAal5Data, hybridDefault and 
hybridHighAal5Data. All AAL5 traffic is UBR and AAL2/Cell Relay
traffic can be RTVBR or UBR.
Out of total available BW on AtmAal25 card:
for cellRelayOnly AAL2/Cell Relay BW is 100% and AAL5 BW is 0%.
50% of AAL2/Cell Relay BW is for RTVBR.
for cellRelayAndManagement AAL2/Cell Relay BW is 95% and AAL5 BW is 5%.
50% of AAL2/Cell Relay BW is for RTVBR.
for dataTerm AAL2/Cell Relay BW is 5% and AAL5 BW is 95%.
50% of AAL2/Cell Relay BW is for RTVBR.
for voiceGateway AAL2/Cell Relay BW is 95% and AAL5 BW is 5%.
95% of AAL2/Cell Relay BW is for RTVBR.
for hybridLowAal5Data AAL2/Cell Relay BW is 75% and AAL5 BW is 25%.
95% of AAL2/Cell Relay BW is for RTVBR.
for hybridDefault AAL2/Cell Relay BW is 60% and AAL5 BW is 40%.
75% of AAL2/Cell Relay BW is for RTVBR.
for hybridHighAal5Data AAL2/Cell Relay BW is 25% and AAL5 BW is 75%.
50% of AAL2/Cell Relay BW is for RTVBR.
              
For malc uplink cards (t1/e1, t3/e3 ima), the following qos values 
and its associated BW can be configured:
              
qos name        ubr%     vbr%     vbrrt%
              
vbnrt95rt5      0        95       5
vbnrt80rt15     5        80       15
vbnrt65rt30     5        65       30
vbnrt50rt45     5        50       45
vbnrt35rt60     5        35       60
vbnrt20rt75     5        20       75
vbnrt5rt95      5        5        95
vbnrt5rt95cbr   5        5        95
              
For all other cards valid value is notApplicable.
This field cannot be updated after row creation.
manual configuration is not supported in this
release.

MIB

ZHONE-SYSTEM-MIB

OID

.1.3.6.1.4.1.5504.3.1.10.1.10

Type

column

Access

readwrite

Status

current

Parent

zhoneSysCardSoftwareConfigEntry

Table

zhoneSysCardSoftwareConfigTable

Siblings

13