sysMax2Enable

ZHONE-COM-VOICE-SIG-MIB · .1.3.6.1.4.1.5504.4.3.7.1.17
MIB view Table view

Object

scalar r/w SNMPv2-TCTruthValue 
This object enables/disables the Max2 domain name 
server (DNS) query operation when the configMax2 
threshold has been reached.

Context

MIB
ZHONE-COM-VOICE-SIG-MIB
OID
.1.3.6.1.4.1.5504.4.3.7.1.17
Type
scalar
Access
readwrite
Status
current
Parent
zhoneVoiceSignalingTimers
Siblings
31

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hookFlashTimerMin
The Hookflash specifies the minimum timer that qualifies for a hookflash. Any loopopen below this time will be ignored as a glitch.
scalarInteger32.1.3.6.1.4.1.5504.4.3.7.1.1
sysRingbackTo
This object contains the default timeout value for ringback tone.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.10
sysReorderToneTo
This object contains the default timeout value for reorder tone.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.11
sysStutterToneTo
This object contains the default timeout value for stutter tone.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.12
sysServerMaxTimer
This object is used as part of a retransmission algorithm when communicating with a call agent. This object contains the maximum time in seconds since the sending of the initial d…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.13
sysConfigMax1
This object contains the suspicious error threshold for signaling messages. The configMax1 object indicates the retransmission threshold at which the gateway MAY actively query…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.14
sysConfigMax2
This object contains the disconnect error threshold for signaling messages. The configMax2 object indicates the retransmission threshold at which the gateway SHOULD contact the…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.15
sysMax1Enable
This object enables/disables the Max1 domain name server (DNS) query operation when the configMax1 threshold has been reached.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.4.3.7.1.16
sysMaxWaitingDelay
Maximum Waiting Delay (MWD) contains the maximum number of seconds a Gateway waits after powering on, before initiating the restart procedure with the call agent.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.18
sysDisconnectWaitTimer
This object contains the initial number of seconds the gateway waits after a disconnect, before initiating the disconnected procedure with the call agent.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.19
hookFlashTimerMax
The Hookflash specifies the maximum timer that qualifies for a hookflash. Any loopopen more than this timer will be considered as a onhook.
scalarInteger32.1.3.6.1.4.1.5504.4.3.7.1.2
sysDisconnectMinTimer
This object contains the minimum number of seconds the gatway waits after a disconnect, before initiating the disconnected procedure with the call agent.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.20
sysDisconnectMaxTimer
This object contains the maximum number of seconds the gatway waits after a disconnect, before initiating the disconnected procedure with the call agent.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.21
sysMaxRetransmitTimer
This object contains the maximum number of seconds for the retransmission timer. When this timer expires the gateway retransmits the message.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.22
sysInitRetransmitTimer
This object contains the initial number of seconds for the retransmission timer.
scalarmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.23
sysKeepAliveTimer
Specifies a timeout value in minutes for sending long duration call notification message.
scalarminutes SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.24
sysNoResponseTimer
Timeout period in seconds before no response is declared.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.25
sysCallWaitMaxRepeat
This object contains the default value of the maximum number of repetitions of the call waiting tone that the gateway will play.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.26
sysCallWaitDelay
This object contains the delay between repetitions of the call waiting tone that the gateway will play.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.27
sysPulseInterDigitTimer
This is the pulse dial inter-digit timeout.
scalarmilliseconds Unsigned32.1.3.6.1.4.1.5504.4.3.7.1.28
sysMinMakePulseWidth
This is the minimum make pulse width for the dial pulse.
scalarmilliseconds Unsigned32.1.3.6.1.4.1.5504.4.3.7.1.29
sysPartialDialTo
This object contains the maximum value of the partial dial time out.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.3
sysMaxMakePulseWidth
This is the maximum make pulse width for the dial pulse.
scalarmilliseconds Unsigned32.1.3.6.1.4.1.5504.4.3.7.1.30
sysMinBreakPulseWidth
This is the minimum break pulse width for the dial pulse.
scalarmilliseconds Unsigned32.1.3.6.1.4.1.5504.4.3.7.1.31
sysMaxBreakPulseWidth
This is the maximum break pulse width for the dial pulse.
scalarmilliseconds Unsigned32.1.3.6.1.4.1.5504.4.3.7.1.32
sysCriticalDialTo
This object contains the maximum value of the critical \ dial time out.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.4
sysBusyToneTo
This object contains the default timeout value for busy tone.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.5
sysDialToneTo
This object contains the default timeout value for dial tone.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.6
sysMsgWaitToneTo
This object contains the default timeout value for message wait tone.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.7
sysOffhookWarnToneTo
This object contains the default timeout value for offhook warn tone.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.8
sysRingingTo
This object contains the default timeout value for ringing.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.3.7.1.9