sysCriticalDialTo
ZHONE-COM-VOICE-SIG-MIB ·
.1.3.6.1.4.1.5504.4.3.7.1.4
Object
This object contains the maximum value of the critical \ dial time out.
Context
- MIB
- ZHONE-COM-VOICE-SIG-MIB
- OID
.1.3.6.1.4.1.5504.4.3.7.1.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- zhoneVoiceSignalingTimers
- Siblings
- 31
Syntax
seconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hookFlashTimerMin The Hookflash specifies the minimum timer that qualifies for a
hookflash. Any loopopen below this time will be ignored as a
glitch. | scalar | Integer32 | .1.3.6.1.4.1.5504.4.3.7.1.1 |
| sysRingbackTo This object contains the default timeout value for
ringback tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.10 |
| sysReorderToneTo This object contains the default timeout value for
reorder tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.11 |
| sysStutterToneTo This object contains the default timeout value for
stutter tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.12 |
| sysServerMaxTimer This object is used as part of a retransmission
algorithm when communicating with a call agent.
This object contains the maximum time in seconds
since the sending of the initial d… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.13 |
| sysConfigMax1 This object contains the suspicious error threshold
for signaling messages. The configMax1 object
indicates the retransmission threshold at which
the gateway MAY actively query… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.14 |
| sysConfigMax2 This object contains the disconnect error threshold
for signaling messages. The configMax2 object
indicates the retransmission threshold at which
the gateway SHOULD contact the… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.15 |
| sysMax1Enable This object enables/disables the Max1 domain name
server (DNS) query operation when the configMax1
threshold has been reached. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.3.7.1.16 |
| sysMax2Enable This object enables/disables the Max2 domain name
server (DNS) query operation when the configMax2
threshold has been reached. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.3.7.1.17 |
| sysMaxWaitingDelay Maximum Waiting Delay (MWD) contains the maximum
number of seconds a Gateway waits after powering
on, before initiating the restart procedure with
the call agent. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.18 |
| sysDisconnectWaitTimer This object contains the initial number of seconds
the gateway waits after a disconnect, before
initiating the disconnected procedure with the
call agent. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.19 |
| hookFlashTimerMax The Hookflash specifies the maximum timer that qualifies for a
hookflash. Any loopopen more than this timer will be considered
as a onhook. | scalar | Integer32 | .1.3.6.1.4.1.5504.4.3.7.1.2 |
| sysDisconnectMinTimer This object contains the minimum number of seconds
the gatway waits after a disconnect, before
initiating the disconnected procedure with the
call agent. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.20 |
| sysDisconnectMaxTimer This object contains the maximum number of seconds
the gatway waits after a disconnect, before
initiating the disconnected procedure with the
call agent. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.21 |
| sysMaxRetransmitTimer This object contains the maximum number of seconds
for the retransmission timer. When this timer
expires the gateway retransmits the message. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.22 |
| sysInitRetransmitTimer This object contains the initial number of seconds
for the retransmission timer. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.23 |
| sysKeepAliveTimer Specifies a timeout value in minutes for sending
long duration call notification message. | scalar | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.24 |
| sysNoResponseTimer Timeout period in seconds before no response is declared. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.25 |
| sysCallWaitMaxRepeat This object contains the default value of the
maximum number of repetitions of the call waiting
tone that the gateway will play. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.26 |
| sysCallWaitDelay This object contains the delay between repetitions
of the call waiting tone that the gateway will play. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.27 |
| sysPulseInterDigitTimer This is the pulse dial inter-digit timeout. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.28 |
| sysMinMakePulseWidth This is the minimum make pulse width for the dial pulse. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.29 |
| sysPartialDialTo This object contains the maximum value of the partial dial
time out. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.3 |
| sysMaxMakePulseWidth This is the maximum make pulse width for the dial pulse. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.30 |
| sysMinBreakPulseWidth This is the minimum break pulse width for the dial pulse. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.31 |
| sysMaxBreakPulseWidth This is the maximum break pulse width for the dial pulse. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.32 |
| sysBusyToneTo This object contains the default timeout value for
busy tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.5 |
| sysDialToneTo This object contains the default timeout value for
dial tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.6 |
| sysMsgWaitToneTo This object contains the default timeout value for
message wait tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.7 |
| sysOffhookWarnToneTo This object contains the default timeout value for
offhook warn tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.8 |
| sysRingingTo This object contains the default timeout value for
ringing. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.9 |