sysConfigMax1
ZHONE-COM-VOICE-SIG-MIB ·
.1.3.6.1.4.1.5504.4.3.7.1.14
Object
This object contains the suspicious error threshold for signaling messages. The configMax1 object indicates the retransmission threshold at which the gateway MAY actively query the domain name server (DNS) in order to detect the possible change of call agent interfaces.
Context
- MIB
- ZHONE-COM-VOICE-SIG-MIB
- OID
.1.3.6.1.4.1.5504.4.3.7.1.14- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- zhoneVoiceSignalingTimers
- Siblings
- 31
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hookFlashTimerMin The Hookflash specifies the minimum timer that qualifies for a
hookflash. Any loopopen below this time will be ignored as a
glitch. | scalar | Integer32 | .1.3.6.1.4.1.5504.4.3.7.1.1 |
| sysRingbackTo This object contains the default timeout value for
ringback tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.10 |
| sysReorderToneTo This object contains the default timeout value for
reorder tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.11 |
| sysStutterToneTo This object contains the default timeout value for
stutter tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.12 |
| sysServerMaxTimer This object is used as part of a retransmission
algorithm when communicating with a call agent.
This object contains the maximum time in seconds
since the sending of the initial d… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.13 |
| sysConfigMax2 This object contains the disconnect error threshold
for signaling messages. The configMax2 object
indicates the retransmission threshold at which
the gateway SHOULD contact the… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.15 |
| sysMax1Enable This object enables/disables the Max1 domain name
server (DNS) query operation when the configMax1
threshold has been reached. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.3.7.1.16 |
| sysMax2Enable This object enables/disables the Max2 domain name
server (DNS) query operation when the configMax2
threshold has been reached. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.3.7.1.17 |
| sysMaxWaitingDelay Maximum Waiting Delay (MWD) contains the maximum
number of seconds a Gateway waits after powering
on, before initiating the restart procedure with
the call agent. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.18 |
| sysDisconnectWaitTimer This object contains the initial number of seconds
the gateway waits after a disconnect, before
initiating the disconnected procedure with the
call agent. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.19 |
| hookFlashTimerMax The Hookflash specifies the maximum timer that qualifies for a
hookflash. Any loopopen more than this timer will be considered
as a onhook. | scalar | Integer32 | .1.3.6.1.4.1.5504.4.3.7.1.2 |
| sysDisconnectMinTimer This object contains the minimum number of seconds
the gatway waits after a disconnect, before
initiating the disconnected procedure with the
call agent. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.20 |
| sysDisconnectMaxTimer This object contains the maximum number of seconds
the gatway waits after a disconnect, before
initiating the disconnected procedure with the
call agent. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.21 |
| sysMaxRetransmitTimer This object contains the maximum number of seconds
for the retransmission timer. When this timer
expires the gateway retransmits the message. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.22 |
| sysInitRetransmitTimer This object contains the initial number of seconds
for the retransmission timer. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.23 |
| sysKeepAliveTimer Specifies a timeout value in minutes for sending
long duration call notification message. | scalar | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.24 |
| sysNoResponseTimer Timeout period in seconds before no response is declared. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.25 |
| sysCallWaitMaxRepeat This object contains the default value of the
maximum number of repetitions of the call waiting
tone that the gateway will play. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.26 |
| sysCallWaitDelay This object contains the delay between repetitions
of the call waiting tone that the gateway will play. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.27 |
| sysPulseInterDigitTimer This is the pulse dial inter-digit timeout. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.28 |
| sysMinMakePulseWidth This is the minimum make pulse width for the dial pulse. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.29 |
| sysPartialDialTo This object contains the maximum value of the partial dial
time out. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.3 |
| sysMaxMakePulseWidth This is the maximum make pulse width for the dial pulse. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.30 |
| sysMinBreakPulseWidth This is the minimum break pulse width for the dial pulse. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.31 |
| sysMaxBreakPulseWidth This is the maximum break pulse width for the dial pulse. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.32 |
| sysCriticalDialTo This object contains the maximum value of the critical \
dial time out. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.4 |
| sysBusyToneTo This object contains the default timeout value for
busy tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.5 |
| sysDialToneTo This object contains the default timeout value for
dial tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.6 |
| sysMsgWaitToneTo This object contains the default timeout value for
message wait tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.7 |
| sysOffhookWarnToneTo This object contains the default timeout value for
offhook warn tone. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.8 |
| sysRingingTo This object contains the default timeout value for
ringing. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.3.7.1.9 |