ipIfAdminStatus
ZHONE-COM-IP-REC-MIB ·
.1.3.6.1.4.1.5504.4.1.9.2.1.22
Object
column
r/w
Enumeration
The desired state of the interface. The testing(3)
state indicates that no operational packets can be
passed. When a managed system initializes, all
interfaces start with ifAdminStatus in the down(2)
state. As a result of either explicit management
action or per configuration information retained by
the managed system, ifAdminStatus is then changed to
either the up(1) or testing(3) states (or remains in
the down(2) state).
This is the same as the ifAdminStatus in the ifTable
(RFC2233). We require it to be in this table in order
to set it on a row-create.
Context
- MIB
- ZHONE-COM-IP-REC-MIB
- OID
.1.3.6.1.4.1.5504.4.1.9.2.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipInterfaceEntry
- Table
- ipInterfaceTable
- Siblings
- 39
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | testing |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipIfLgId obsolete This field has been deprecated and replaced by ipIfLowerIfIndex.
The ID number of the Line Redundancy Group containing the physical
line associated with this inter… | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.1 |
| ipIfFarEndAddr The IP address of the interface on the far end of this interface.
This information is needed for Zhone Automatic Provisioning. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.4.1.9.2.1.10 |
| ipIfMru The size of the largest packet which can be
received on the interface, specified in octets.
For interfaces that are used for network
datagrams, this is the size of the largest net… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.1.9.2.1.11 |
| ipIfReasmMaxSize The size of the largest IP datagram which this entity can
re-assemble from incoming IP fragmented datagrams received
on this interface. | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.12 |
| ipIfIngressFilterName deprecated The name of the ingress filter associated with this interface.
This object has been replaced by ipIfIngressFilterID. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.4.1.9.2.1.13 |
| ipIfEgressFilterName deprecated The name of the egress filter associated with this interface.
This object has been replaced by ipIfEgressFilterID. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.4.1.9.2.1.14 |
| ipIfPointToPoint This flag is set to 'true(1)' if the interface
is point to point and the value 'false(2)' otherwise. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.15 |
| ipIfMcastEnabled This object has the value 'true(1)' If multicast is
enabled on this interface and the value 'false(2)' otherwise. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.16 |
| ipIfIpFwdEnabled This object has the value 'true(1)' If ip forwarding is
enabled on this interface and the value 'false(2)' otherwise. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.17 |
| ipIfMcastFwdEnabled This object has the value 'true(1)' If multicast forwarding is
enabled on this interface and the value 'false(2)' otherwise. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.18 |
| ipIfNATEnabled This object has the value 'true(1)' if NAT is enabled on this
interface and the value 'false(2)' otherwise. The default value
is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.19 |
| ipIfVpi If this IP interface is on an ATM VC, the ATM VPI is specified here.
If the IP interface is not an ATM VC, this field is ignored.
The VPI value for a VPL or VCL. The value VPI=0
i… | column | ATM-TC-MIBAtmVpIdentifier | .1.3.6.1.4.1.5504.4.1.9.2.1.2 |
| ipIfBcastEnabled This object has the value 'true(1)' If broadcast is
enabled on this interface and the value 'false(2)' otherwise. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.20 |
| ipIfRowStatus This object is used to create and remove rows in the table.
See ipInterfaceEntry description for minimum requirements. | column | Zhone-TCZhoneRowStatus | .1.3.6.1.4.1.5504.4.1.9.2.1.21 |
| ipIfIngressPacketRuleGroupIndex The group index of the ingress filter (packet rule entry
/entries) provisioned for this interface.
A value of 0 means there is no ingress filter provisioned
for this interface. | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.23 |
| ipIfEgressPacketRuleGroupIndex The group index of the egress filter (packet rule entry
/entries) provisioned for this interface.
A value of 0 means there is no egress filter provisioned
for this interface. | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.24 |
| ipIfLowerIfIndex The ifIndex of the lower layer interface to which this IP
interface should be bound. If this IP interface is
bound dynamically to a lower layer (e.g. for PPP), this
object should… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.4.1.9.2.1.25 |
| ipIfPppEnabled This field is used to indicate that this IP interface is
to be bound to a PPP interface. When this object is set to
'true', rows will be created in the pppNCPExtensionsTable,
ppp… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.26 |
| ipAddrDynamic This is the mode by which the IP address is discovered
by the system.
STATIC - Means,The IP address is Statically configured.
DHCPCLIENT - IP address discovered from DHCPCLIEN… | column | Enumeration | .1.3.6.1.4.1.5504.4.1.9.2.1.27 |
| dhcpServerEnable If this field is set to TRUE ,then
ipAddrDynamic has to be STATIC and if and when
Dhcp server is not enabled then ipAddrdynamic
can set to STATIC,PPP or DHCPCLIENT. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.28 |
| dhcpSubnetGroup This is the DHCP Subnet group ID, it indicates which address
pool grouping may be used for the CPE subnet.Needed to
support the point-to-multipoint model. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.1.9.2.1.29 |
| ipIfVci If this IP interface is on an ATM VC, the ATM VCI is specified here.
If the IP interface is not an ATM VC, this field is ignored.
The maximum VCI value cannot exceed the value all… | column | ATM-TC-MIBAtmVcIdentifier | .1.3.6.1.4.1.5504.4.1.9.2.1.3 |
| unnumberedIndex The index of the ip-unnumbered-record to use to obtain the
local side Unnumbered Address. This is need in order to
support the IP point-to-multipoint model. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.1.9.2.1.30 |
| mcastControlList List of Mcast-control-ids this IP Interface record is associated
with. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5504.4.1.9.2.1.31 |
| vlanid This is the Virtual LAN Identifier for the IP Interface. If the
VLAN ID specified is non-zero, all traffic destined to this
interface should have the VLAN ID specified. | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.32 |
| maxVideoStreams This is the maximum number of unique multicast (video) streams
that this interface has subscribed to. | column | Unsigned32 | .1.3.6.1.4.1.5504.4.1.9.2.1.33 |
| tosOption Determines IP TOS Class-Of-Service bit setting on packets
sent out this interface. The setting is stored in the
tosCOS field.
disable - COS setting is untouched. For packet… | column | Enumeration | .1.3.6.1.4.1.5504.4.1.9.2.1.34 |
| tosCOS The COS bit value to load based on tosOption setting. | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.35 |
| vlanCOS COS value loaded into VLAN header. Applicable only if
the vlanid is non-zero. | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.36 |
| ipStagTPID The value of the tag protocol identifier that is being used
for QinQ packets.( 0x8100 is default) | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.37 |
| ipStagId The s-tag value that we are expecting to put on
packets that are Rxed on this interface. | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.38 |
| ipStagIdCOS The s-tag COS to be used when doing s-tag intertion. | column | Integer32 | .1.3.6.1.4.1.5504.4.1.9.2.1.39 |
| ipIfRDIndex The Routing Domain Index. An IP address is unique only to
the routing domain, therefore we must specify the routing domain
in which this interface belongs. | column | ZHONE-COM-IP-RD-MIBZhoneRDIndex | .1.3.6.1.4.1.5504.4.1.9.2.1.4 |
| ipOnDemandStatsEnabled If true, the on-demand stats collection for this Ip interface will be enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.9.2.1.40 |
| ipIfDhcp deprecated This enumeration indicates whether this interface is a dhcp client,
a dhcp server, both, or neither. The default value is noDhcp. | column | Enumeration | .1.3.6.1.4.1.5504.4.1.9.2.1.5 |
| ipIfAddr The IP address to which this entry's addressing information
pertains. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.4.1.9.2.1.6 |
| ipIfNetMask The subnet mask associated with the IP address of this
entry. The value of the mask is an IP address with all the
network bits set to 1 and all the hosts bits set to 0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.4.1.9.2.1.7 |
| ipIfBcastAddr The IP broadcast address used for sending datagrams on the
(logical) interface associated with the IP address of this entry. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.4.1.9.2.1.8 |
| ipIfDestAddr The destination address for point-to-point ip interfaces.
This object will be ignored for non point-to-point ip interfaces. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.4.1.9.2.1.9 |