gponAlarmLOL
ZHNGPONLINK ·
.1.3.6.1.4.1.5504.2.5.43.1.3.1.3
Object
column
GPONOnOffAlarmValues
If the value of this object is ON, the GPON link has detected a Loss of Link condition.
Context
- MIB
- ZHNGPONLINK
- OID
.1.3.6.1.4.1.5504.2.5.43.1.3.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- gponAlarmStatusEntry
- Table
- gponAlarmStatusTable
- Siblings
- 11
Syntax
GPONOnOffAlarmValues
- Source
- GPONOnOffAlarmValues
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gponAlarmAutoPowerControlFail If the value of this object is ON, the automatic power-control
has failed. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.1 |
| gponAlarmDeactivateOnuId If the value of this object is ON, the GPON link has received a
de-activate request and has successfully de-activated the link. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.10 |
| gponAlarmDisabledOnu If the value of this object is ON, the GPON link has been disabled
by the OLT or the ONU Serial Number is not configured on the OLT. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.11 |
| gponAlarmPEE If the value of this object is ON, the GPON link has detected a
physical equipment error which may indicate a possible hardware
problem. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.12 |
| gponAlarmLOS If the value of this object is ON, no input signal has been detected.
Make sure fiber is plugged in. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.2 |
| gponAlarmLOF If the value of this object is ON, the GPON link has detected a
Loss Of Frame condition. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.4 |
| gponAlarmLCDG If the value of this object is ON, the GPON link has detected a
Loss of GEM Channel Delineation condition. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.5 |
| gponAlarmFailedSignal If the value of this object is ON, the GPON link has detected a
bit error rate greater than 10E-5. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.6 |
| gponAlarmDegradedSignal If the value of this object is ON, the GPON link has detected a
bit error rate greater than 10E-6. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.7 |
| gponAlarmStartupFail If the value of this object is ON, the GPON link has detected an
error during startup. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.8 |
| gponAlarmMsgErrorMsg If the value of this object is ON, the GPON link has received an
unknown PLOAM message. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.9 |