gponAlarmDisabledOnu
ZHNGPONLINK ·
.1.3.6.1.4.1.5504.2.5.43.1.3.1.11
Object
column
GPONOnOffAlarmValues
If the value of this object is ON, the GPON link has been disabled by the OLT or the ONU Serial Number is not configured on the OLT.
Context
- MIB
- ZHNGPONLINK
- OID
.1.3.6.1.4.1.5504.2.5.43.1.3.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- gponAlarmStatusEntry
- Table
- gponAlarmStatusTable
- Siblings
- 11
Syntax
GPONOnOffAlarmValues
- Source
- GPONOnOffAlarmValues
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gponAlarmAutoPowerControlFail If the value of this object is ON, the automatic power-control
has failed. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.1 |
| gponAlarmDeactivateOnuId If the value of this object is ON, the GPON link has received a
de-activate request and has successfully de-activated the link. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.10 |
| gponAlarmPEE If the value of this object is ON, the GPON link has detected a
physical equipment error which may indicate a possible hardware
problem. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.12 |
| gponAlarmLOS If the value of this object is ON, no input signal has been detected.
Make sure fiber is plugged in. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.2 |
| gponAlarmLOL If the value of this object is ON, the GPON link has detected a
Loss of Link condition. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.3 |
| gponAlarmLOF If the value of this object is ON, the GPON link has detected a
Loss Of Frame condition. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.4 |
| gponAlarmLCDG If the value of this object is ON, the GPON link has detected a
Loss of GEM Channel Delineation condition. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.5 |
| gponAlarmFailedSignal If the value of this object is ON, the GPON link has detected a
bit error rate greater than 10E-5. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.6 |
| gponAlarmDegradedSignal If the value of this object is ON, the GPON link has detected a
bit error rate greater than 10E-6. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.7 |
| gponAlarmStartupFail If the value of this object is ON, the GPON link has detected an
error during startup. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.8 |
| gponAlarmMsgErrorMsg If the value of this object is ON, the GPON link has received an
unknown PLOAM message. | column | GPONOnOffAlarmValues | .1.3.6.1.4.1.5504.2.5.43.1.3.1.9 |