xcmPrtInterpGrayLevels
XEROX-MIB ·
.1.3.6.1.4.1.253.8.55.15.1.1.6
Object
This object describes the gray levels supported by this interpreter. This may represent gray levels within a color plane. The value zero means not specified for this interpreter.
Context
- MIB
- XEROX-MIB
- OID
.1.3.6.1.4.1.253.8.55.15.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- xcmPrtInterpreterEntry
- Table
- xcmPrtInterpreterTable
- Siblings
- 36
Syntax
XEROX-GENERAL-TCCardinal32
- Source
- XEROX-GENERAL-TCCardinal32
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xcmPrtInterpRowStatus Manages the status of this conceptual row in the
xcmPrtInterpreterTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.253.8.55.15.1.1.1 |
| xcmPrtInterpLineWrap This object controls whether long lines are wrapped or
truncated.
If On, long lines wrap to the next line.
If Off, long lines are truncated.
Note th… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.15.1.1.10 |
| xcmPrtInterpMediumSizeDefault This object specifies the default medium size for an
interpreter. It is used if no medium size is specified.
For PCL, this object sets the General PJL Environment … | column | XEROX-PRINTER-EXT-TCXcmPrtMediumSize | .1.3.6.1.4.1.253.8.55.15.1.1.11 |
| xcmPrtInterpPageProtect This object enables reserving sufficient memory for printing
complex pages, thus avoiding Page Too Complex errors.
The amount of memory reserved is implementation specific.
When t… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.15.1.1.12 |
| xcmPrtInterpPageProtectSize This object sets the PageSize to be used by this interpreter
in reserving sufficient memory for printing complex pages,
thus avoiding Page Too Complex Errors.
The actual amount of… | column | XEROX-PRINTER-EXT-TCXcmPrtMediumSize | .1.3.6.1.4.1.253.8.55.15.1.1.13 |
| xcmPrtInterpPageSizeErrorPolicy Controls interpreter behavior when the requested Page Size
is not currently available. | column | XEROX-PRINTER-EXT-TCXcmPrtPageSizeErrorPolicy | .1.3.6.1.4.1.253.8.55.15.1.1.14 |
| xcmPrtInterpPlexSupported This object specifies the Plex modes supported by this
interpreter. These Plex modes specify the relative
orientations between consecutive pages, and capabilities of
printing one… | column | XEROX-PRINTER-EXT-TCXcmPrtPlex | .1.3.6.1.4.1.253.8.55.15.1.1.15 |
| xcmPrtInterpPlexDefault This object specifies the default plex for this interpreter.
The device shall set no more than one bit.
The value zero shall indicate not specified. | column | XEROX-PRINTER-EXT-TCXcmPrtPlex | .1.3.6.1.4.1.253.8.55.15.1.1.16 |
| xcmPrtInterpPrintEdgeToEdge Enables edge to edge printing for interpreters that try to
enforce a coordinate system that is offset from the edge of the
paper, e.g., PCL.
When On, jobs are printed to the edge… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.15.1.1.17 |
| xcmPrtInterpPrintQuality Sets the default output quality of the printed document for this
interpreter. Some printers have programmatically controlled
output quality. | column | XEROX-PRINTER-EXT-TCXcmPrtPrintQuality | .1.3.6.1.4.1.253.8.55.15.1.1.18 |
| xcmPrtInterpPrtInputIndexDflt Sets the default input source for the interpreter.
It is the index to the prtInputGroup.
The value zero means not specified. | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.19 |
| xcmPrtInterpAuxSheetPackage This object is an index into the xcmPrtAuxPackageTable.
This table is used to enable or disable printing of
auxiliary sheets by this interpreter.
The value zero sha… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.2 |
| xcmPrtInterpPrtOutputIndexDflt The value of the index of the default Output bin for this
interpreter. If specified, this object overrides the box level
object prtOutputDefaultIndex.
The value ze… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.20 |
| xcmPrtInterpResFeedDirDefault This object specifies for this interpreter, the default
resolution in the Feed direction in 10000 units of measure
specified by prtMarkerAddressabilityUnit for this interpreter.
… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.21 |
| xcmPrtInterpResXFeedDirDefault This object specifies for this interpreter, the default
resolution in the Cross Feed direction in 10000 units of measure
specified by prtMarkerAddressabilityUnit for this interpre… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.22 |
| xcmPrtInterpResIPResIndex This object shall provide an index into the xcmIPResTable.
The xcmIPResTable shall be used to list available resolutions
supported by this interpreter. Each row includes objects
… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.23 |
| xcmPrtInterpResIPResIndexDflt This object which is a pointer into the xcmIPResTable sets the
print resolution for this interpreter.
The value zero means unspecified. | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.24 |
| xcmPrtInterpTextFormLength This object sets the maximum number of lines per page for a text
file that is being printed using this interpreter.
For PCL Interpreters, this object provides the G… | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.25 |
| xcmPrtInterpTimeoutJob This object sets how long printer will wait for correct end of
job from the interpreter.
This setting lets you adjust how long the printer will wait to
receive the data it needs t… | column | Seconds XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.26 |
| xcmPrtInterpTimeoutPage This object sets how long printer will wait for correct end of
page from the interpreter.
If, for example, a print job contains a page without the correct
end of page code, the jo… | column | Seconds XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.27 |
| xcmPrtInterpInputAliasIndexDflt Sets the default input tray alias for this interpreter.
It is the xcmPrtInputAliasIndex to the xcmPrtInputAlias table.
The value zero means 'not specified'. | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.28 |
| xcmPrtInterpTraySwitch This object declares for this interpreter the tray switching
declaration mechanism used.
Note: The tray switching declaration mechanisms do not specify
how or when … | column | XEROX-PRINTER-EXT-TCXcmPrtTraySwitch | .1.3.6.1.4.1.253.8.55.15.1.1.29 |
| xcmPrtInterpContextSaving Enables reserving memory for saving permanently downloaded fonts
and macros, when the printer switches between this and another
interpreter. The effect is to save the memory for … | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.15.1.1.3 |
| xcmPrtInterpMediumTypeDefault Specifies the paper type used to print a page if no paper
type is specified by the software application
Typical paper types could include Plain, Preprinted, etc. | column | OctetString | .1.3.6.1.4.1.253.8.55.15.1.1.30 |
| xcmPrtInterpMediaTypeErrPolicy Controls interpreter behavior when the requested Media Type
is not currently available. | column | XEROX-PRINTER-EXT-TCXcmPrtMediaTypeErrorPolicy | .1.3.6.1.4.1.253.8.55.15.1.1.31 |
| xcmPrtInterpErrorPolicyTimeout Provides the timeout for ErrorPolicy enumerations
requiring one, e.g. 'ignoreAfterTimeout'
The value zero shall mean infinite or not supported. | column | Seconds XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.32 |
| xcmPrtInterpLineTerm Enables adding a Carriage Return after every Line Feed.
The value 'On' indicates that a Carriage Return will be
added after every Line Feed.
Usage e… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.15.1.1.33 |
| xcmPrtInterpEdgeEnhancement Specifies whether the printer should perform EdgeEnhancement of
the image of the printed document for this interpreter.
interpreter.
The value 'other' shall mean no… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.15.1.1.4 |
| xcmPrtInterpFontIndexDefault The value of xcmFontIndex corresponding to the xcmFontEntry
which represents the default font for this Interpreter.
A value of (-1) means 'other'.
A value of (-2) m… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.253.8.55.15.1.1.5 |
| xcmPrtInterpAutoContinue This object controls whether the printer resumes printing after
a system error occurs.
When set to Off, the printer does not automatically resume.
Manual interventi… | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.15.1.1.50 |
| xcmPrtInterpEnvFeederSize This object informs the printer what size of envelope is
currently loaded in the envelope feeder. Because the input tray
feeding envelopes may not have a size sensor, this settin… | column | XEROX-PRINTER-EXT-TCXcmPrtMediumSize | .1.3.6.1.4.1.253.8.55.15.1.1.51 |
| xcmPrtInterpManualFeedPgSize This object sets the default medium size of the manual input
tray for this interpreter. | column | XEROX-PRINTER-EXT-TCXcmPrtMediumSize | .1.3.6.1.4.1.253.8.55.15.1.1.52 |
| xcmPrtInterpOffsetStackingType This object further refines the type of offset stacking from
that specified by the object prtOutputOffsetStacking in the
Printer MIB.
Printers who need to specify O… | column | XEROX-PRINTER-EXT-TCXcmPrtOutputOffsetStackingType | .1.3.6.1.4.1.253.8.55.15.1.1.53 |
| xcmPrtInterpGrayLevelDefault This object controls the number of gray scales for this
interpreter.
The value zero means not specified for this interpreter. | column | XEROX-GENERAL-TCCardinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.7 |
| xcmPrtInterpJamRecovery This object controls how the printer recovers from a paper jam.
When set to On, the printer reprints any pages in the printer at
the time of the jam, after the jam … | column | Printer-MIBPresentOnOff | .1.3.6.1.4.1.253.8.55.15.1.1.8 |
| xcmPrtInterpJobCopiesDefault This defines the default number of job copies to be printed
by this interpreter.
If set incorrectly, this object may cause difficulties at
customer sites. Agent de… | column | XEROX-GENERAL-TCOrdinal32 | .1.3.6.1.4.1.253.8.55.15.1.1.9 |