wtWebio577xxEA12x6RelAlarmOutputTrigger

This variable allows setting of individual output trigger conditions. 
The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. 
Bit 0 corresponds to the LSB.
	The first four OCTETS contain the mask which determines which of the outputs are to 
	be considered (corresponding bit = 1) and which outputs are to ignore 
	(corresponding bit = 0):
	OCTET 1 : unused
	OCTET 2 : unused
	OCTET 3 : unused
	OCTET 4 : Bit 0-6: Mask for digital outputs 0-6
              	
	OCTETS 5-8 contain the level (1=HIGH, 0=LOW) which the outputs 
	should assume:
	OCTET 5 : unused
	OCTET 6 : unused
	OCTET 7 : unused
OCTET 8 : Bit 0-6: Level of digital outputs 0-6
              
	OCTETS 9-12 contain the ANY bit (1=ON, 0=OFF). Outputs masked with the any bit trigger with any change 
	of the corresponding output bit. Settings in OCTET 5-9 are then unused:
	OCTET 9 : unused
	OCTET 11: unused
	OCTET 12: Bit 0-6   : ANY bits of digital inputs 0-6

MIB

Webio-Digital-MIB-US

OID

.1.3.6.1.4.1.5040.1.2.51.3.1.5.3.1.2

Type

column

Access

readwrite

Status

mandatory

Parent

wtWebio577xxEA12x6RelAlarmEntry