wwpVoiceGatewayCallAgentAddr – WWP-VOICE-GATEWAY-MIB

Object

scalar r/w SNMPv2-TCDisplayString

This object is used to configure either the domain 
name or the IP address of the Call Agent 
in standard dot notation.     
          
The complete address of a default call agent is composed of  
IP address/Domain Name and UDP port.
          
wwpVoiceGatewayCallAgentAddr specifies address of the Call
 Agent to which RSIP(RestartInProgress) message 
is sent whenever system starts up or line goes up.
          
 Call agent address may be an IP address or fully qualified 
 domain name (FQDN). This object should be set to zero length
 string if the Management Stations wish to 
 attempt to obtain the CA address from a DNS server
(highest priority MGCP CA is chosen).

Context

MIB: WWP-VOICE-GATEWAY-MIB
OID: .1.3.6.1.4.1.6141.2.43.1.1.1.2
Type: scalar
Access: readwrite
Status: current
Parent: wwpVoiceGatewayMGCP

Net-SNMP examples

How SNMP and these commands work

Scalars have one instance, identified by the .0 suffix.

Read the scalar instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'WWP-VOICE-GATEWAY-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-VOICE-GATEWAY-MIB::wwpVoiceGatewayCallAgentAddr.0'

More examples

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'WWP-VOICE-GATEWAY-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'WWP-VOICE-GATEWAY-MIB::wwpVoiceGatewayCallAgentAddr'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints

range: 0..255