wwpLeosVplsVirtualSwitchMplsVpnId
WWP-LEOS-VPLS-MIB ·
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.3
Object
This object specifies the subscriber vlan Id for given virtual switch.
Context
- MIB
- WWP-LEOS-VPLS-MIB
- OID
.1.3.6.1.4.1.6141.2.60.28.1.1.20.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wwpLeosVplsVirtualSwitchMplsEntry
- Table
- wwpLeosVplsVirtualSwitchMplsTable
- Siblings
- 16
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosVplsVirtualSwitchMplsIndx This object specifies the virtual switch index which is used as unique
index in the table. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.1 |
| wwpLeosVplsVirtualSwitchMplsType This object specifies the type of virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.10 |
| wwpLeosVplsVirtualSwitchMplsRowStatus This object can be set to 'createAndGo' to create entry in the table.
This object can be set to 'destroy' to delete entry in the table.
Following objects must be set to valid valu… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.11 |
| wwpLeosVplsVirtualSwitchMplsMacLrnState Setting this object will set the Mac learning state for a given mpls virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.12 |
| wwpLeosVplsVirtualSwitchMplsTunnelMethod Setting this object will set the tunneling method for a given mpls virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.13 |
| wwpLeosVplsVirtualSwitchMplsCtrlProtocolDot1dPri This object specifies the .1d priority to use when encapsulation control frames. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.14 |
| wwpLeosVplsVirtualSwitchMplsSubscriberDot1dPolicy Setting this object will configure the policy used to decide whether or not the
subscriber frame .1d priorty should be left alone, or remarked to the computed provider priority. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.15 |
| wwpLeosVplsVirtualSwitchMplsCtrlProtTransFrameValidate Setting this object will set the transparent-mode validate for a given mpls virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.16 |
| wwpLeosVplsVirtualSwitchMplsHonorPriority Setting this object will select either the c-vlan or s-vlan
priority to use through the Virtual Switch and it's associated
MPLS Tunnel. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.17 |
| wwpLeosVplsVirtualSwitchMplsName This object specifies the virtual switch name. this object can only be specified at the
time of creation and cannot be modified later.
Mpls and Ethernet virtual switch name cannot… | column | OctetString | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.2 |
| wwpLeosVplsVirtualSwitchMplsEncapCosPolicy This object specifies the ingress cos policy for given virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.4 |
| wwpLeosVplsVirtualSwitchMplsEncapFixedDot1dPri This object specifies the ingress fixed cos attributes for given virtual switch. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.5 |
| wwpLeosVplsVirtualSwitchMplsDecapCosPolicy This object specifies the egress cos policy for given virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.6 |
| wwpLeosVplsVirtualSwitchMplsDecapFixedDot1dPri This object specifies the egress cos attributes for given virtual switch. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.7 |
| wwpLeosVplsVirtualSwitchMplsCtrlProtocolTunnelState This object enables or disables control protocol tunneling for a given
virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.8 |
| wwpLeosVplsVirtualSwitchMplsDecapTTLPolicy This object specifies the TTL policy for a given virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.20.1.9 |