wwpLeosVplsVirtualSwitchEthReservedVlan
WWP-LEOS-VPLS-MIB ·
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.18
Object
column
r/w
Integer32
Reserved vlan for the virtual-switch.
Context
- MIB
- WWP-LEOS-VPLS-MIB
- OID
.1.3.6.1.4.1.6141.2.60.28.1.1.26.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wwpLeosVplsVirtualSwitchEthEntry
- Table
- wwpLeosVplsVirtualSwitchEthTable
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosVplsVirtualSwitchEthIndx This object specifies the virtual switch index which is used as unique
index in the table. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.1 |
| wwpLeosVplsVirtualSwitchEthMacLrnState Setting this object will set the Mac learning state for each ethernet virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.10 |
| wwpLeosVplsVirtualSwitchEthTunnelMethod Setting this object will set the tunneling method for each ethernet virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.11 |
| wwpLeosVplsVirtualSwitchEthCtrlProtocolDot1dPri This object specifies the .1d priority to use when encapsulation control frames. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.12 |
| wwpLeosVplsVirtualSwitchEthSubscriberDot1dPolicy Setting this object will configure the policy used to decide whether or not the
subscriber frame .1d priorty should be left alone, or remarked to the computed provider priority. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.13 |
| wwpLeosVplsVirtualSwitchEthCtrlProtTransFrameValidate Setting this object will set the transparent-mode validate for a given eth virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.14 |
| wwpLeosVplsVirtualSwitchEthVcType This object specifies the type of vc to be attached to this virtual switch.
This object must be set (using SNMP multiple set operation) to pbt type if
wwpLeosVplsVirtualSwitchEthV… | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.15 |
| wwpLeosVplsVirtualSwitchEthHonorPriority This object specifies which Vlan priority to use on a Virtual
Switch. Honor either the c-vlan or the s-vlan priority through
the Virtual Switch and it's associated VC or Tunnel. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.16 |
| wwpLeosVplsVirtualSwitchEthDescription This object specifies the virtual switch description. | column | OctetString | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.17 |
| wwpLeosVplsVirtualSwitchEthName This object specifies the virtual switch name. this object can only be specified at the
time of creation and cannot be modified later.
Mpls and Ethernet virtual switch name cannot… | column | OctetString | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.2 |
| wwpLeosVplsVirtualSwitchEthVc This object specifies the primary virtual circuit ID associated with this virtual switch.
To unset it set this to 0.
If this object represents PBT virtual circuit then wwpLeosVpls… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.3 |
| wwpLeosVplsVirtualSwitchEthEncapCosPolicy This object specifies the ingress cos policy for given virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.4 |
| wwpLeosVplsVirtualSwitchEthEncapFixedDot1dPri This object specifies the ingress fixed cos attributes for given virtual switch. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.5 |
| wwpLeosVplsVirtualSwitchEthDecapCosPolicy This object specifies the egress cos policy for given virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.6 |
| wwpLeosVplsVirtualSwitchEthDecapFixedDot1dPri This object specifies the egress cos attributes for given virtual switch. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.7 |
| wwpLeosVplsVirtualSwitchEthCtrlProtocolTunnelState This object enables or disables control protocol tunneling for a given
virtual switch. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.8 |
| wwpLeosVplsVirtualSwitchEthRowStatus This object can be set to 'createAndGo' to create entry in the table.
This object can be set to 'destroy' to delete entry in the table.
Following objects must be set to valid valu… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6141.2.60.28.1.1.26.1.9 |