wwpLeosVplsVirtualCircuitMplsTunnelPolicy
WWP-LEOS-VPLS-MIB ·
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.5
Object
column
r/w
Enumeration
This object represents that this virtual circuit should select the tunnel as fixed or use the first active tunnel available on the outgoing port. If this object is set to fixed then wwpLeosVplsVirtualCircuitMplsTunnelIndx must be specified.
Context
- MIB
- WWP-LEOS-VPLS-MIB
- OID
.1.3.6.1.4.1.6141.2.60.28.1.1.15.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wwpLeosVplsVirtualCircuitMplsEntry
- Table
- wwpLeosVplsVirtualCircuitMplsTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | fixed |
2 | firstAvailable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosVplsVirtualCircuitMplsIndex This represents the virtual circuit index in the table.
This number should be unique in the table. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.1 |
| wwpLeosVplsVirtualCircuitMplsDecapLabel If wwpLeosVplsVirtualCircuitMplsType is set to static
then this object specifies the decap label the should be used
for this virtual circuit. Label should be in the range 2048..18… | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.10 |
| wwpLeosVplsVirtualCircuitMplsGroupId This represents the group ID advertised in the LDP signaling
if wwpLeosVplsVirtualCircuitMplsType is set to dynamic. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.11 |
| wwpLeosVplsVirtualCircuitMplsProtectionType This represents that this virtual circuit is primary or secondary
virtual circuit. If primary virtual circuit goes down that secondary
virtual circuit will be used. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.12 |
| wwpLeosVplsVirtualCircuitMplsStatusTlv Specifies whether the Status TLV in LDP signaling should be advertised or not.
This mib object is only used if wwpLeosVplsVirtualCircuitMplsType is set to dynamic.
This field cann… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.13 |
| wwpLeosVplsVirtualCircuitMplsMtu Setting this object will set the MTU for this VC.
This MTU is advertised to the peer if wwpLeosVplsVirtualCircuitMplsType
is set to dynamic. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.14 |
| wwpLeosVplsVirtualCircuitMplsStatus Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in t… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.15 |
| wwpLeosVplsVirtualCircuitMplsName This represents the name of the virtual circuit associated
with the given virtual circuit.
Mpls and Ethernet virtual circuit name cannot be same
but indexes can be. | column | OctetString | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.2 |
| wwpLeosVplsVirtualCircuitMplsType This represents the type of the virtual circuit. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.3 |
| wwpLeosVplsVirtualCircuitMplsDestAddr This represents the destination address used
by the signaling protocol if wwpLeosVplsVirtualCircuitMplsType is
set to dynamic.
This object cannot be modified once entry is created. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.4 |
| wwpLeosVplsVirtualCircuitMplsFixedTunnelId This represents the tunnel that this virtual circuit should be mapped to.
This object is only used if wwpLeosVplsVirtualCircuitMplsTunnelPolicy is set
to fixed. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.6 |
| wwpLeosVplsVirtualCircuitMplsActiveTunnelId This represents the tunnel that this virtual circuit is currently using.
This object is equal to wwpLeosVplsVirtualCircuitMplsFixedTunnelId if
wwpLeosVplsVirtualCircuitMplsTunnelP… | column | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.7 |
| wwpLeosVplsVirtualCircuitMplsOperStatus This represents the operational status of the virtual circuit. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.8 |
| wwpLeosVplsVirtualCircuitMplsEncapLabel If wwpLeosVplsVirtualCircuitMplsType is set to static
then this object specifies the encap label the should be used
for this virtual circuit. Label should be in the range 2048..18… | column | Unsigned32 | .1.3.6.1.4.1.6141.2.60.28.1.1.15.1.9 |