wwpLeosVplsGlobalAttrs
WWP-LEOS-VPLS-MIB ·
.1.3.6.1.4.1.6141.2.60.28.1.1.9
Object
node
No description available.
Context
- MIB
- WWP-LEOS-VPLS-MIB
- OID
.1.3.6.1.4.1.6141.2.60.28.1.1.9- Type
- node
- Parent
- wwpLeosVpls
- Siblings
- 36
- Children
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosVplsVirtualCircuitTable deprecated The (conceptual) table listing the virtual circuit table.
To create entry use SNMP, multiple set operation must
be used because following MIB objects needs to be set
while creatin… | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.1 |
| wwpLeosVplsMplsPathTable Mpls Path table used to represent the explicit path for
RSVP tunnels. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.10 |
| wwpLeosVplsMplsPathMemberTable Table specifies the list of IP addresses (Hops)
to get to the destination PE. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.11 |
| wwpLeosVplsRsvpAttrTable RSVP Attr Table used by MPLS wwpLeosVplsEncapTunnelTable Tunnels
when wwpLeosVplsEncapTunnelProtType = rsvp.
Whenever entry is created in the wwpLeosVplsEncapTunnelTable table
wit… | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.12 |
| wwpLeosVplsEncapTunnelTable This table represents the encap tunnels for VPLS.
To create STATIC encap tunnel following objects must be set
Encap and Decap Tunnel name cannot be same but indexes can be
wwpLeos… | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.13 |
| wwpLeosVplsDecapTunnelTable This table represents the Decap tunnels for VPLS
wwpLeosVplsDecapTunnelType If not set will default to static
To create STATIC Decap tunnel following objects… | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.14 |
| wwpLeosVplsVirtualCircuitMplsTable The (conceptual) table listing the mpls virtual circuit table.
To create entry use SNMP, multiple set operation must
be used.
Following Mib objects must be specified while creatin… | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.15 |
| wwpLeosVplsVirtualCircuitMplsStatsTable The (conceptual) table listing the mpls virtual circuit stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.16 |
| wwpLeosVplsVirtualCircuitEthTable The (conceptual) table listing the virtual circuit table.
To create entry use SNMP, multiple set operation must
be usedd because following mib objects needs to be set
while creati… | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.17 |
| wwpLeosVplsVirtualCircuitEtherTypeTable The (conceptual) table listing the ether type to be used
for each port. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.18 |
| wwpLeosVplsVirtualCircuitEthStatsTable The (conceptual) table listing the virtual circuit stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.19 |
| wwpLeosVplsVirtualSwitchMplsTable This table is used to manage virtual switch entries
on the device. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.20 |
| wwpLeosVplsVirtualSwitchMplsMemberTable deprecated This table is used to create mpls virtual switch subscriber port-vlan membership entry. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.21 |
| wwpLeosVplsVirtualSwitchMplsMemberStatsTable deprecated The (conceptual) table listing the virtual switch member stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.22 |
| wwpLeosVplsVirtualSwitchMplsMemberMeshVcTable This table is used to create mpls virtual switch mesh-vc membership entry. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.23 |
| wwpLeosVplsVirtualSwitchMplsMemberAcVcTable This table is used to create mpls virtual switch mesh-vc membership entry. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.24 |
| wwpLeosVplsSwitchMplsCtrlProtocolTable The (conceptual) table listing the l2 virtual switch control frame
protocol status tunnel for a given Vpls. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.25 |
| wwpLeosVplsVirtualSwitchEthTable This table is used to manage virtual switch entries
on the device. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.26 |
| wwpLeosVplsVirtualSwitchEthMemberTable deprecated This table is used to create virtual switch membership entry. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.27 |
| wwpLeosVplsVirtualSwitchEthMemberStatsTable deprecated The (conceptual) table listing the virtual switch member stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.28 |
| wwpLeosVplsSwitchEthCtrlProtocolTable The (conceptual) table listing the l2 virtual switch control frame
protocol status tunnel for a given Vpls. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.29 |
| wwpLeosVplsVirtualSwitchEtypeTranslationTable This table controls the global Ethertype translation functions. Only two
entries are allowed. Creating more than two entries will return an error.
The control is bi-directional.… | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.30 |
| wwpLeosVplsTunnelPairTable This table allows creating tunnel pairs. Having a tunnel pair will
force the device to accept pbt encapsulated frames on given pair of tunnels ports
and not on any port. This tabl… | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.31 |
| wwpLeosVplsVirtualSwitchMplsEvplMemberTable This table is used to create mpls virtual switch subscriber port-vlan membership entry. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.32 |
| wwpLeosVplsVirtualSwitchMplsEvplMemberStatsTable The (conceptual) table listing the virtual switch member stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.33 |
| wwpLeosVplsVirtualSwitchEthEvplMemberTable This table is used to create virtual switch membership entry. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.34 |
| wwpLeosVplsVirtualSwitchEthEvplMemberStatsTable The (conceptual) table listing the virtual switch member stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.35 |
| wwpLeosVplsVirtualCircuitEthTotalStatsTable The (conceptual) table listing the virtual circuit stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.36 |
| wwpLeosVplsVirtualCircuitMplsTotalStatsTable The (conceptual) table listing the mpls virtual circuit stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.37 |
| wwpLeosVplsVirtualSwitchEthL2CftProtocolTable Table of Virtual Switch L2 CFT protocols. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.49 |
| wwpLeosVplsVirtualSwitchTable deprecated This table is used to manage virtual switch entries
on the device. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.5 |
| wwpLeosVplsVirtualSwitchCFTProtoStatsTable The (conceptual) table listing the l2 control frame protocol stats
for a given vlan. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.50 |
| wwpLeosVplsVirtualSwitchCFTProtoTotalStatsTable The (conceptual) table listing the l2 control frame protocol stats
for a given vlan. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.51 |
| wwpLeosVplsVirtualSwitchMemberTable deprecated This table is used to create virtual switch membership entry. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.6 |
| wwpLeosVplsSwitchCtrlProtocolTable deprecated The (conceptual) table listing the l2 virtual switch control frame
protocol status tunnel for a given Vpls. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.7 |
| wwpLeosVplsSwitchReservedVlanTable The (conceptual) table listing the reserved Vlans used for virtual
switch. | table | - | .1.3.6.1.4.1.6141.2.60.28.1.1.8 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosVplsTunnelFixedTTL This object specifies the fixed TTL value for all tunnels. | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.9.1 |
| wwpLeosVplsResolverTimeout Setting this object will set the PE resolver timeout.
This timeout value decides how frequently PE resolver will arp
for the destination IP specified by wwpLeosVplsEncapTunnelDest… | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.28.1.1.9.2 |
| wwpLeosVplsStaticLabelRangeStart Setting this object will set the lowest label that can be assigned to
static encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both
wwpLeosVplsS… | scalar | Unsigned32 | .1.3.6.1.4.1.6141.2.60.28.1.1.9.3 |
| wwpLeosVplsStaticLabelRangeEnd Setting this object will set the maximum label that can be assigned to
static encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both
wwpLeosVpls… | scalar | Unsigned32 | .1.3.6.1.4.1.6141.2.60.28.1.1.9.4 |
| wwpLeosVplsDynamicLabelRangeStart Setting this object will set the lowest label that can be assigned to
dynamic encap / decap tunnels or virtual circuits. Multiple set operation can be used to set both
wwpLeosVpls… | scalar | Unsigned32 | .1.3.6.1.4.1.6141.2.60.28.1.1.9.5 |
| wwpLeosVplsDynamicLabelRangeEnd Setting this object will set the maximum label that will be assigned to
encap tunnels or virtual circuits. Multiple set operation can be used to set both
wwpLeosVplsDynamicLabelRa… | scalar | Unsigned32 | .1.3.6.1.4.1.6141.2.60.28.1.1.9.6 |
| wwpLeosVplsVirtualCircuitStatsClear Setting this object to clear will reset statistics for all virtual circuits | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.28.1.1.9.7 |