wwpLeosRsvpteBlockadeMultiple
WWP-LEOS-RSVPTE-MIB ·
.1.3.6.1.4.1.6141.2.60.30.1.1.10
Object
scalar
Integer32
The RSVP-TE value, Kb, which is the number of refresh timeout periods after which blockade state is deleted.
Context
- MIB
- WWP-LEOS-RSVPTE-MIB
- OID
.1.3.6.1.4.1.6141.2.60.30.1.1.10- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- wwpLeosRsvpteObjects
- Siblings
- 16
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-214783647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosRsvpteAdminStatus The desired administrative state of RSVP-TE. | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.30.1.1.1 |
| wwpLeosRsvpteLSPSetupPriority The setup priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically more o… | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.30.1.1.11 |
| wwpLeosRsvpteLSPHoldingPriority The holding priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest
priority, 7 the lowest. The value of this object must be
numerically less… | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.30.1.1.12 |
| wwpLeosRsvpteUseHopByHop A flag to indicate that RSVP-TE should use the hop by hop
addressing scheme for PATH and PATH-TEAR messages it
sends. If set then the IP addresses used in the IP header
of PATH m… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.30.1.1.13 |
| wwpLeosRsvpteRestartCapable A flag to indicate whether the local node should advertise
itself as restart capable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6141.2.60.30.1.1.14 |
| wwpLeosRsvpteRestartTime The time in milliseconds that the local node takes to
restart RSVP-TE and the communication channel used for
RSVP-TE communication. This is advertised to neighbors in
the Restart… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.30.1.1.15 |
| wwpLeosRsvpteRecoveryTime The period of time in milliseconds that the local node
would like neighbors to take to resyncronize RSVP-TE and
MPLS forwarding information after the re-establishment of
Hello con… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.30.1.1.16 |
| wwpLeosRsvpteMinPeerRestart The mininum period of time in milliseconds that RSVP-TE
should wait for a restart capable neighbor to regain
Hello connectivity before invoking procedures related to
communication… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.30.1.1.17 |
| wwpLeosRsvpteOperStatus The current operational state of RSVP-TE. | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.30.1.1.2 |
| wwpLeosRsvpteRetryInterval The persistent tunnel retry interval.
This is the interval between the first failure of a persistent
tunnel and the first attempt to re-establish the tunnel.
This cannot be change… | scalar | seconds Unsigned32 | .1.3.6.1.4.1.6141.2.60.30.1.1.3 |
| wwpLeosRsvpteRetryInfiniteState The persistent tunnel retry infinity.
This is the State which when on will trigger RSVP-TE to try to restore the tunnels
infinite times. This object can only be set if RSVP-TE is … | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.30.1.1.4 |
| wwpLeosRsvpteRetryMax The maximum number of retry attempts that will be made before a
persistent tunnel is deemed inoperable. Once in this state,
a management agent should set mplsTunnelAdminStatus to… | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.30.1.1.5 |
| wwpLeosRsvpteRefreshInterval This RSVP-TE value, R, which is used to set the average
interval between refresh path and resv messages. | scalar | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.30.1.1.6 |
| wwpLeosRsvpteRefreshMultiple The RSVP-TE value, K, which is the number of unresponded Path
or Resv refresh attempts which must be made, spaced by
the refresh interval before the state is deemed to have
timed … | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.30.1.1.7 |
| wwpLeosRsvpteRfrshSlewDenom The denominator of the fraction, SlewMax, which is the
maximum allowable increase in the refresh interval, R, to
prevent state timeout while changing R. R is increased by
this fr… | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.30.1.1.8 |
| wwpLeosRsvpteRfrshSlewNumerator The numerator of the fraction, SlewMax, which is the maximum
allowable increase in the refresh interval, R, to prevent
state timeout while changing R. R is increased by this
frac… | scalar | Integer32 | .1.3.6.1.4.1.6141.2.60.30.1.1.9 |