wwpLeosPbtGlobalAttrs
WWP-LEOS-PBT-MIB ·
.1.3.6.1.4.1.6141.2.60.38.1.1.1
Object
node
No description available.
Context
- MIB
- WWP-LEOS-PBT-MIB
- OID
.1.3.6.1.4.1.6141.2.60.38.1.1.1- Type
- node
- Parent
- wwpLeosPbt
- Siblings
- 6
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosTcePbt | node | - | .1.3.6.1.4.1.6141.2.60.38.1.1.10 |
| wwpLeosPbtBridgeNameMacMapTable The (conceptual) table listing the host names to mac mapping table.
To create entry in this table use SNMP multiple set operation.
- wwpLeosPbtBridgeNameMacMapBridgeName must be … | table | - | .1.3.6.1.4.1.6141.2.60.38.1.1.2 |
| wwpLeosPbtReservedBVIDTable The (conceptual) table listing the BVID vlans reserved for provider backbone bridge tunnels. | table | - | .1.3.6.1.4.1.6141.2.60.38.1.1.3 |
| wwpLeosPbtVirtualCircuitTable The (conceptual) table listing the virtual circuit mac in mac table.
To create entry use SNMP multiple set operation because following mib objects
needs to be set when creating e… | table | - | .1.3.6.1.4.1.6141.2.60.38.1.1.4 |
| wwpLeosPbtVirtualCircuitStatsTable The (conceptual) table listing the mpls virtual circuit stats
table. | table | - | .1.3.6.1.4.1.6141.2.60.38.1.1.5 |
| wwpLeosPbtLocalBridgeNameMacMapTable The (conceptual) table listing the host names to mac mapping table.
To create entry in this table use SNMP multiple set operation.
- wwpLeosPbtHostNameMacMapHostName must be spec… | table | - | .1.3.6.1.4.1.6141.2.60.38.1.1.6 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosPbtBridgeMac This represents the provider mac address to be used as source mac during PBT encapsulation.
If this object is not set then it will return default mac derived from chassis mac. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6141.2.60.38.1.1.1.1 |
| wwpLeosPbtTunnelSwitchOverHoldTime This object represents the hold time before data traffic on backup tunnel will automatically
switchover to primary tunnel. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.38.1.1.1.10 |
| wwpLeosPbtServiceTagEType This represents the etype value to be used in I-Tag (Service tag) section of PBT encapsulation.
The I-tag ether type cannot be modified in native mode PBT | scalar | OctetString | .1.3.6.1.4.1.6141.2.60.38.1.1.1.2 |
| wwpLeosPbtTunnelTagEtype This represents the etype value to be used in B-Tag section of PBT encapsulation. Valid values are
8100, 9100 & 88a8 | scalar | OctetString | .1.3.6.1.4.1.6141.2.60.38.1.1.1.3 |
| wwpLeosPbtTunnelReversionState Setting this object will enable or disable automatic tunnel reversion from backup to primary
if primary comes back up. Device will wait for wwpLeosPbtTunnelReversionHoldTime befor… | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.38.1.1.1.4 |
| wwpLeosPbtTunnelReversionHoldTime This object represents the hold time before data traffic on the backup tunnel will automatically
revert to the primary tunnel. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.38.1.1.1.5 |
| wwpLeosPbtTransitTunnelEtypeRemark Setting this object will enable or disable remarking of the EtherType field in the B-Tag
(tunnel) portion of PBT frames that are transiting through the device without PBT encapsul… | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.38.1.1.1.6 |
| wwpLeosPbtAdminMode This object represents PBT Admin mode. Some platforms support either non-native or native mode. | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.38.1.1.1.7 |
| wwpLeosPbtOperMode This object represents PBT Oper mode. Some platforms support either non-native or native mode. | scalar | Enumeration | .1.3.6.1.4.1.6141.2.60.38.1.1.1.8 |
| wwpLeosPbtServiceVlanTpid When operating in native mode, this is the value of the
service vlan TPID that will be used if retain-stag is set to TRUE.
This is configurable only in native mode PBT. In non-nat… | scalar | OctetString | .1.3.6.1.4.1.6141.2.60.38.1.1.1.9 |