wwpLeosOamAdminState
WWP-LEOS-OAM-MIB ·
.1.3.6.1.4.1.6141.2.60.400.1.2.1.1.1
Object
column
r/w
Enumeration
This object is used to provision the default administrative OAM mode for this
interface. This object represents the desired state of OAM for this interface.
The wwpLeosOamAdminState always starts in the disabled(1) state
until an explicit management action or configuration
information retained by the system causes a transition to the
enabled(2) state.
Note that the value of this object is ignored when the
interface is not operating in full-duplex mode. OAM is not
supported on half-duplex links.
Context
- MIB
- WWP-LEOS-OAM-MIB
- OID
.1.3.6.1.4.1.6141.2.60.400.1.2.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wwpLeosOamEntry
- Table
- wwpLeosOamTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wwpLeosOamPeerStatusNotifyState Whether or not a change in peer status, IE whether or not a Link Lost
Timer is active for the peer, should result in a system event being
generated. | column | Enumeration | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.10 |
| wwpLeosOamOperStatus At initialization and failure conditions, two OAM entities on
the same full-duplex Ethernet link begin a discovery phase to
determine what OAM capabilities may be used on that lin… | column | Enumeration | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.2 |
| wwpLeosOamMode This object configures the mode of OAM operation for this
Ethernet like interface. OAM on Ethernet interfaces may be in
'active' mode or 'passive' mode. These two modes differ i… | column | Enumeration | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.3 |
| wwpLeosMaxOamPduSize The largest OAMPDU that the OAM entity supports. OAM
entities exchange maximum OAMPDU sizes and negotiate to use
the smaller of the two maximum OAMPDU sizes between the peers.
Th… | column | bytes SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.4 |
| wwpLeosOamConfigRevision The configuration revision of the OAM entity as reflected in
the latest OAMPDU sent by the OAM entity. The configuration revision
is used by OAM entities to indicate configuratio… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.5 |
| wwpLeosOamFunctionsSupported The OAM functions supported on this Ethernet like interface.
OAM consists of separate functional sets beyond the basic
discovery process which is always required. These functiona… | column | Bits | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.6 |
| wwpLeosOamPort An Ethernet port on the switch. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.7 |
| wwpLeosOamPduTimer The time in milliseconds between Information OAMPDUs
being transmitted via the Ethernet port. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.8 |
| wwpLeosOamLinkLostTimer The time in milliseconds to wait for an Information OAMPDU
via the Ethernet port, from a peer, before declaring the link lost. | column | Integer32 | .1.3.6.1.4.1.6141.2.60.400.1.2.1.1.9 |