wlanAPEnet1Mode
WLSX-WLAN-MIB ·
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.10
Object
column
ARUBA-TCArubaEnet1Mode
Enet1 Mode of the Access Point.
Context
- MIB
- WLSX-WLAN-MIB
- OID
.1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wlsxWlanAPEntry
- Table
- wlsxWlanAPTable
- Siblings
- 51
Values & Constraints
Type Values
1 | activeStandby |
2 | tunnel |
3 | bridge |
4 | notApplicable |
5 | split |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlanAPMacAddress Ethernet MAC Address of the Access Point | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.1 |
| wlanAPIpsecMode IPSEC Mode of the Access Point. | column | ARUBA-TCArubaEnableValue | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.11 |
| wlanAPUpTime Time (in hundredths of seconds) since the last time the Access
Point bootstrapped with the controller. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.12 |
| wlanAPModelName Model name of the Access Point. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.13 |
| wlanAPLocation Location of the Access Point. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.14 |
| wlanAPBuilding AP Building Number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.15 |
| wlanAPFloor AP Floor Number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.16 |
| wlanAPLoc AP Location. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.17 |
| wlanAPExternalAntenna AP Antenna Status. | column | ARUBA-TCArubaAntennaSetting | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.18 |
| wlanAPStatus AP Status. | column | ARUBA-TCArubaAPStatus | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.19 |
| wlanAPIpAddress IP Address of the Access Point | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.2 |
| wlanAPNumBootstraps Number of times the AP has bootstrapped with the controller. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.20 |
| wlanAPNumReboots Number of times the AP has rebooted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.21 |
| wlanAPUnprovisioned Indicates whether the AP is unprovisioned due to lack of
antenna gain or location code settings. | column | ARUBA-TCArubaUnprovisionedStatus | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.22 |
| wlanAPMonitorMode Indicates whether any radio on this AP is acting as an
air monitor. | column | ARUBA-TCArubaMonitorMode | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.23 |
| wlanAPFQLNBuilding The building component of the AP's FQLN. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.24 |
| wlanAPFQLNFloor The floor component of the AP's FQLN. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.25 |
| wlanAPFQLN The AP's Fully Qualified Location Name (FQLN). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.26 |
| wlanAPFQLNCampus The campus component of the AP's FQLN. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.27 |
| wlanAPLongitude Longitude of the AP. Signed floating-point value. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.28 |
| wlanAPLatitude Latitude of the AP. Signed floating-point value. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.29 |
| wlanAPName Host name of the Access Point. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.3 |
| wlanAPAltitude Altitude of the AP. Signed floating-point value. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.30 |
| wlanAPMeshRole AP Mesh role | column | ARUBA-TCArubaMeshRole | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.31 |
| wlanAPSysLocation AP sysLocation | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.32 |
| wlanAPHwVersion Hardware version of the AP. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.33 |
| wlanAPSwVersion Software version of the AP. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.34 |
| wlanAPNumWarmReboots Number of times the AP has warm-rebooted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.35 |
| wlanAPOuterIpAddress Outer IP Address of the Access Point. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.36 |
| wlanAPRemoteLanIpAddress LAN IP Address of the Remote Access Point. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.37 |
| wlanAPActiveUplink Uplink of the RAP(Ethernet or USB). | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.38 |
| wlanAPSwitchIpAddress Access points' Serving Controller's IP Address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.39 |
| wlanAPGroupName Group Name of the Access Point. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.4 |
| wlanAPStandbyIpAddress Access points' Standby Controller's IP Address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.40 |
| wlanAPConnectedAsStandby Access point connected as active/standby. | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.41 |
| wlanAPServiceTag Access point service tag. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.42 |
| wlanAPConnectedAsDatazone This object indicate this AP comes from datazone(1-4) or primary zone(0) | column | Integer32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.43 |
| wlanAPIpv6Address IPv6 Address of the Access Point | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.44 |
| wlanAPFlexRadioMode Flex Radio Operating Mode | column | - | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.45 |
| wlanAPdot11aAntennaGain10x Configured antenna gain for 'A' Radio (antennaGain*10) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.46 |
| wlanAPdot11gAntennaGain10x Configured antenna gain for 'G' Radio (antennaGain*10) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.47 |
| wlanAPDual5GMode Dual5GHz Operating Mode | column | - | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.48 |
| wlanAPActiveIpAddress IPv4 or IPv6 Address of the Access Point | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.49 |
| wlanAPModel Sys OID of the Access Point. | column | ObjectIdentifier | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5 |
| wlanAPSplit5GMode Split 5GHz Operating Mode | column | - | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.50 |
| wlanAPOuterIpv6Address Outer IPv6 Address of the Access Point | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.51 |
| wlanAPRemoteLanIpv6Address LAN IPv6 Address of the Remote Access Point | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.52 |
| wlanAPSerialNumber Serial Number of the Access Point. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6 |
| wlanAPdot11aAntennaGain Configured antenna gain for 'A' Radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7 |
| wlanAPdot11gAntennaGain Configured antenna gain for 'G' Radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8 |
| wlanAPNumRadios Number of Radios in the Access Point. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9 |