wlanAPBssidRogueType
WLSX-WLAN-MIB ·
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.6
Object
column
ARUBA-TCArubaRogueApType
The type of the Rogue.
Context
- MIB
- WLSX-WLAN-MIB
- OID
.1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wlsxWlanAPBssidEntry
- Table
- wlsxWlanAPBssidTable
- Siblings
- 19
Values & Constraints
Type Values
1 | valid |
2 | interfering |
3 | unsecure |
4 | dos |
5 | unknown |
6 | knownInterfering |
7 | suspectedUnsecure |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wlanAPBSSID The MAC address of the Access Point. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.1 |
| wlanAPBssidInactiveTime Time (in hundredths of seconds) since any activity took place on
the BSSID. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.10 |
| wlanAPBssidLoadBalancing Indicates whether load balancing is enabled or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.11 |
| wlanAPBssidNumAssociatedStations Indicates the number of stations associated to this BSSID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.12 |
| wlanAPBssidAPMacAddress Indicates the Access Point to which this BSSID belongs. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.13 |
| wlanAPBssidPhyNumber Indicates the radio number to which this BSSID belongs. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.14 |
| wlanAPBssidHTMode Indicates the HT mode of this BSSID, if any. | column | ARUBA-TCArubaHTMode | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.15 |
| wlanAPBssidHTExtChannel Indicates the offset of the 40MHz extension channel, if any. | column | ARUBA-TCArubaHTExtChannel | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.16 |
| wlanAPBssidHTChannel A display string indicating the current channel. If wlanAPBssidHTExtChannel
is set to 'above' or 'below', then the channel number will be appended
with '+' or '-' respectively. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.17 |
| wlanAPBssidSnr Indicates the Signal Noise Ratio of this BSSID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.18 |
| wlanAPBssidChannelV2 The current operating channel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.19 |
| wlanAPESSID ESSID this BSSID is advertising. | column | OctetString | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.2 |
| wlanAPBssidSecChannel The secondary channel when operating in 80+80MHz channel bandwidth. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.20 |
| wlanAPBssidSlot Slot to which the Access Point is connected. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.3 |
| wlanAPBssidPort Port to which the Access Point is connected. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.4 |
| wlanAPBssidPhyType Physical Layer Protocol support of the AP. | column | ARUBA-TCArubaPhyType | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.5 |
| wlanAPBssidMode Indicates whether the Access point is an Air Monitor or regular AP
or Mesh Portal or Mesh Point. | column | Enumeration | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.7 |
| wlanAPBssidChannel deprecated The current operating channel. | column | Integer32 | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.8 |
| wlanAPBssidUpTime Time (in hundredths of seconds) since the tunnel was created
between the access point and controller | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.9 |