wanT3E3StatsOOFs

WANSTATS-MIB · .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.10
MIB view Table view

Object

column SNMPv2-SMICounter64 
A DS3 OOF defect is detected when any three or more errors
in sixteen or fewer consecutive F-bits occur within a DS3
M-frame.  An OOF defect may also be called a Severely
Errored Frame (SEF) defect.  An OOF defect is cleared when
reframe occurs.  A DS3 Loss of Frame (LOF) failure is
declared when the DS3 OOF defect is consistent for 2 to 10
seconds.  The DS3 OOF defect ends when reframe occurs.
The DS3 LOF failure is cleared when the DS3 OOF
defect is absent for 10 to 20 seconds.
              
An E3 OOF defect is detected when four consecutive frame
alignment signals have been incorrectly received in there
predicted positions in an E3 signal. E3 frame alignment
occurs when the presence of three consecutive frame
alignment signals have been detected.

Context

MIB
WANSTATS-MIB
OID
.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.10
Type
column
Access
readonly
Status
current
Parent
wanT3E3StatsEntry
Table
wanT3E3StatsTable
Siblings
23

Syntax

SNMPv2-SMICounter64
Source
SNMPv2-SMICounter64
Base type
Unsigned64

Values & Constraints

Type Constraints
range: 0..18446744073709551615

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wanT3E3StatsIndex
The value of this object uniquely identifies this wanT3E3StatsTable entry.
columnInteger32.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.1
wanT3E3StatsSEFSs
A SEFS is a second with one or more Out of Frame defects OR a detected incoming AIS.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.11
wanT3E3StatsUASs
UAS are calculated by counting the number of seconds that the interface is unavailable. The DS3 interface is said to be unavailable from the onset of 10 contiguous PSESs, or the …
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.12
wanT3E3StatsLCVs
This parameter is a count of both BPVs and EXZs occurring over the accumulation period. An EXZ increments the LCV by one regardless of the length of the zero string.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.13
wanT3E3StatsPCVs
For all DS3 applications, a coding violation error event is a P-bit Parity Error event. A P-bit Parity Error event is the occurrence of a received P-bit code on the DS3 M-frame t…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.14
wanT3E3StatsLESs
A Line Errored Second is a second in which one or more CVs occurred OR one or more LOS defects.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.15
wanT3E3StatsCCVs
For C-bit Parity and SYNTRAN DS3 applications, this is the count of coding violations reported via the C-bits. For C-bit Parity, it is a count of CP-bit parity errors occurring in…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.16
wanT3E3StatsCESs
An CES is a second with one or more CCVs OR one or more Out of Frame defects OR a detected incoming AIS. This count is only for the SYNTRAN and C-bit Parity DS3 applications. Thi…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.17
wanT3E3StatsCSESs
A CSES is a second with 44 or more CCVs OR one or more Out of Frame defects OR a detected incoming AIS. This count is only for the SYNTRAN and C-bit Parity DS3 applications. This…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.18
wanT3E3StatsRAIs
The Remote Alarm Indication (RAI) failure, in SYNTRAN applications, is declared after detecting the Yellow Alarm Signal on the alarm channel. See ANSI T1.107a-1990 [10]. The Rem…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.19
wanT3E3StatsDataSource
This object identifies the source of the data that this wanT3E3StatsEntry analyzes. This source can be any DS3 or E3 interface on this device. In order to identify a particular …
columnObjectIdentifier.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.2
wanT3E3StatsAISs
The DS3 AIS is framed with 'stuck stuffing.' This implies that it has a valid M-subframe alignments bits, M-frame alignment bits, and P bits. The information bits are set to a 1…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.20
wanT3E3StatsLOFs
A DS3 Loss of Frame (LOF) failure is declared when the DS3 OOF defect is consistent for 2 to 10 seconds. The DS3 OOF defect ends when reframe occurs. The DS3 LOF failure is clea…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.21
wanT3E3StatsLOSs
The DS3 LOS defect is declared upon observing 175 +/- 75 contiguous pulse positions with no pulses of either positive or negative polarity. The DS3 LOS defect is terminated upon o…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.22
wanT3E3StatsOwner
The entity that configured this entry.
columnRMON-MIBOwnerString.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.23
wanT3E3StatsStatus
The status of this wanT3E3StatsTable entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.24
wanT3E3StatsDropEvents
The total number of events in which frames were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of frames dropped; it is just t…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.3
wanT3E3StatsInFrames
The total number of frames seen originating from the far end of the link including errored frames.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.4
wanT3E3StatsOutFrames
The total number of frames seen originating from the near end of the link including errored frames.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.5
wanT3E3StatsInOctets
The sum of octets from all frames seen originating from the far end of the link including errored frames.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.6
wanT3E3StatsOutOctets
The sum of octets from all frames seen originating from the near end of the link including errored frames.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.7
wanT3E3StatsPESs
A PES is a second with one or more PCVs OR one or more Out of Frame defects OR a detected incoming AIS. This gauge is not incremented when UASs are counted.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.8
wanT3E3StatsPSESs
A PSES is a second with 44 or more PCVs OR one or more Out of Frame defects OR a detected incoming AIS. This gauge is not incremented when UASs are counted.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.9