wanT3E3StatsLCVs

WANSTATS-MIB · .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.13

Object

column SNMPv2-SMICounter64

This parameter is a count of both BPVs and EXZs
occurring over the accumulation period.  An EXZ
increments the LCV by one regardless of the length
of the zero string.

Context

MIB: WANSTATS-MIB
OID: .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.13
Type: column
Access: readonly
Status: current
Parent: wanT3E3StatsEntry
Table: wanT3E3StatsTable
Siblings: 23

Syntax

SNMPv2-SMICounter64

Source: SNMPv2-SMICounter64
Base type: Unsigned64

Values & Constraints

Type Constraints

range: 0..18446744073709551615

Related Objects

Sibling Objects

Object	Type	Syntax	OID
wanT3E3StatsIndex The value of this object uniquely identifies this wanT3E3StatsTable entry.	column	Integer32	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.1`
wanT3E3StatsOOFs A DS3 OOF defect is detected when any three or more errors in sixteen or fewer consecutive F-bits occur within a DS3 M-frame. An OOF defect may also be called a Severely Errored …	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.10`
wanT3E3StatsSEFSs A SEFS is a second with one or more Out of Frame defects OR a detected incoming AIS.	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.11`
wanT3E3StatsUASs UAS are calculated by counting the number of seconds that the interface is unavailable. The DS3 interface is said to be unavailable from the onset of 10 contiguous PSESs, or the …	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.12`
wanT3E3StatsPCVs For all DS3 applications, a coding violation error event is a P-bit Parity Error event. A P-bit Parity Error event is the occurrence of a received P-bit code on the DS3 M-frame t…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.14`
wanT3E3StatsLESs A Line Errored Second is a second in which one or more CVs occurred OR one or more LOS defects.	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.15`
wanT3E3StatsCCVs For C-bit Parity and SYNTRAN DS3 applications, this is the count of coding violations reported via the C-bits. For C-bit Parity, it is a count of CP-bit parity errors occurring in…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.16`
wanT3E3StatsCESs An CES is a second with one or more CCVs OR one or more Out of Frame defects OR a detected incoming AIS. This count is only for the SYNTRAN and C-bit Parity DS3 applications. Thi…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.17`
wanT3E3StatsCSESs A CSES is a second with 44 or more CCVs OR one or more Out of Frame defects OR a detected incoming AIS. This count is only for the SYNTRAN and C-bit Parity DS3 applications. This…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.18`
wanT3E3StatsRAIs The Remote Alarm Indication (RAI) failure, in SYNTRAN applications, is declared after detecting the Yellow Alarm Signal on the alarm channel. See ANSI T1.107a-1990 [10]. The Rem…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.19`
wanT3E3StatsDataSource This object identifies the source of the data that this wanT3E3StatsEntry analyzes. This source can be any DS3 or E3 interface on this device. In order to identify a particular …	column	ObjectIdentifier	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.2`
wanT3E3StatsAISs The DS3 AIS is framed with 'stuck stuffing.' This implies that it has a valid M-subframe alignments bits, M-frame alignment bits, and P bits. The information bits are set to a 1…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.20`
wanT3E3StatsLOFs A DS3 Loss of Frame (LOF) failure is declared when the DS3 OOF defect is consistent for 2 to 10 seconds. The DS3 OOF defect ends when reframe occurs. The DS3 LOF failure is clea…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.21`
wanT3E3StatsLOSs The DS3 LOS defect is declared upon observing 175 +/- 75 contiguous pulse positions with no pulses of either positive or negative polarity. The DS3 LOS defect is terminated upon o…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.22`
wanT3E3StatsOwner The entity that configured this entry.	column	RMON-MIBOwnerString	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.23`
wanT3E3StatsStatus The status of this wanT3E3StatsTable entry.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.24`
wanT3E3StatsDropEvents The total number of events in which frames were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of frames dropped; it is just t…	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.3`
wanT3E3StatsInFrames The total number of frames seen originating from the far end of the link including errored frames.	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.4`
wanT3E3StatsOutFrames The total number of frames seen originating from the near end of the link including errored frames.	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.5`
wanT3E3StatsInOctets The sum of octets from all frames seen originating from the far end of the link including errored frames.	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.6`
wanT3E3StatsOutOctets The sum of octets from all frames seen originating from the near end of the link including errored frames.	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.7`
wanT3E3StatsPESs A PES is a second with one or more PCVs OR one or more Out of Frame defects OR a detected incoming AIS. This gauge is not incremented when UASs are counted.	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.8`
wanT3E3StatsPSESs A PSES is a second with 44 or more PCVs OR one or more Out of Frame defects OR a detected incoming AIS. This gauge is not incremented when UASs are counted.	column	SNMPv2-SMICounter64	`.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.9`