wanT3E3StatsIndex
WANSTATS-MIB ·
.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.1
Object
column
Integer32
The value of this object uniquely identifies this wanT3E3StatsTable entry.
Context
- MIB
- WANSTATS-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- wanT3E3StatsEntry
- Table
- wanT3E3StatsTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wanT3E3StatsOOFs A DS3 OOF defect is detected when any three or more errors
in sixteen or fewer consecutive F-bits occur within a DS3
M-frame. An OOF defect may also be called a Severely
Errored … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.10 |
| wanT3E3StatsSEFSs A SEFS is a second with one or more Out of Frame defects
OR a detected incoming AIS. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.11 |
| wanT3E3StatsUASs UAS are calculated by counting the number of seconds that
the interface is unavailable. The DS3 interface is said
to be unavailable from the onset of 10 contiguous PSESs, or
the … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.12 |
| wanT3E3StatsLCVs This parameter is a count of both BPVs and EXZs
occurring over the accumulation period. An EXZ
increments the LCV by one regardless of the length
of the zero string. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.13 |
| wanT3E3StatsPCVs For all DS3 applications, a coding violation error event is
a P-bit Parity Error event. A P-bit Parity Error event is
the occurrence of a received P-bit code on the DS3 M-frame
t… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.14 |
| wanT3E3StatsLESs A Line Errored Second is a second in
which one or more CVs occurred OR one or more LOS defects. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.15 |
| wanT3E3StatsCCVs For C-bit Parity and SYNTRAN DS3 applications, this is
the count of coding violations reported via the C-bits.
For C-bit Parity, it is a count of CP-bit parity errors
occurring in… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.16 |
| wanT3E3StatsCESs An CES is a second with one or more CCVs OR
one or more Out of Frame defects OR a detected incoming AIS.
This count is only for the SYNTRAN and C-bit Parity DS3
applications. Thi… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.17 |
| wanT3E3StatsCSESs A CSES is a second with 44 or more CCVs OR
one or more Out of Frame defects OR a detected incoming AIS.
This count is only for the SYNTRAN and C-bit Parity DS3
applications. This… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.18 |
| wanT3E3StatsRAIs The Remote Alarm Indication (RAI) failure, in SYNTRAN
applications, is declared after detecting
the Yellow Alarm Signal on the alarm channel. See ANSI
T1.107a-1990 [10]. The Rem… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.19 |
| wanT3E3StatsDataSource This object identifies the source of the data that this
wanT3E3StatsEntry analyzes. This source can be any DS3 or E3
interface on this device. In order to identify a particular
… | column | ObjectIdentifier | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.2 |
| wanT3E3StatsAISs The DS3 AIS is framed with 'stuck stuffing.' This implies
that it has a valid M-subframe alignments bits, M-frame
alignment bits, and P bits. The information bits are set
to a 1… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.20 |
| wanT3E3StatsLOFs A DS3 Loss of Frame (LOF) failure is declared when the DS3 OOF
defect is consistent for 2 to 10 seconds. The DS3 OOF defect
ends when reframe occurs. The DS3 LOF failure is clea… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.21 |
| wanT3E3StatsLOSs The DS3 LOS defect is declared upon observing 175 +/- 75
contiguous pulse positions with no pulses of either
positive or negative polarity.
The DS3 LOS defect is terminated upon o… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.22 |
| wanT3E3StatsOwner The entity that configured this entry. | column | RMON-MIBOwnerString | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.23 |
| wanT3E3StatsStatus The status of this wanT3E3StatsTable entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.24 |
| wanT3E3StatsDropEvents The total number of events in which frames were dropped by
the probe due to lack of resources. Note that this number is
not necessarily the number of frames dropped; it is just t… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.3 |
| wanT3E3StatsInFrames The total number of frames seen originating from the far end
of the link including errored frames. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.4 |
| wanT3E3StatsOutFrames The total number of frames seen originating from the near end
of the link including errored frames. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.5 |
| wanT3E3StatsInOctets The sum of octets from all frames seen originating from the
far end of the link including errored frames. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.6 |
| wanT3E3StatsOutOctets The sum of octets from all frames seen originating from the
near end of the link including errored frames. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.7 |
| wanT3E3StatsPESs A PES is a second with one or more PCVs OR
one or more Out of Frame defects OR a detected incoming AIS.
This gauge is not incremented when UASs are counted. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.8 |
| wanT3E3StatsPSESs A PSES is a second with 44 or more PCVs OR
one or more Out of Frame defects OR a detected incoming AIS.
This gauge is not incremented when UASs are counted. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.4.1.9 |