wanAtmStatsOutIncorrectMsgs

WANSTATS-MIB · .1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.18
MIB view Table view

Object

column SNMPv2-SMICounter64 
The Incorrect Messages Counter reflects any sort of incorrect
information in a message.  This includes:
              
? RELEASE, RELEASE COMPLETE, ADD PARTY REJECT, and 
 STATUS messages transmitted or received, that contain any of
 the Cause values listed below.
? Ignored messages.  These messages are dropped because the
 message was so damaged that it could not be further processed.
 A list of dropped messages is compiled below:
   Message with invalid protocol discriminator
   Message with errors in the call reference I.E.
? Bits 5-8 of the first octet not equal to '0000'
? Bits 1-4 of the first octet indicating a length other than
 3 octets
? RELEASE COMPLETE message received with a call reference that
 does not relate to a call active or in progress
? SETUP message received with call reference flag incorrectly
 set to 1
? SETUP message received with a call reference for a call that is 
 already active or in progress.
 Message too short
              
The following cause values are monitored by this counter
Note: These cause values apply to both UNI3.0 and UNI3.1 unless
otherwise stated)
  Cause Value     Meaning
  10            VPCI/VCI unacceptable (UNI3.0 only)
  36            VPCI/VCI assignment failure (UNI3.1 only)
  81            invalid call reference value
  82            identified channel does not exist
  89            invalid endpoint reference
  96            mandatory information element is missing
  97            message type non-existent or not
                implemented
  99            information element non-existent or not
                implemented
 100            invalid information element contents
 101            message not compatible with call state
 104            incorrect message length
 111            protocol error, unspecified
              
NOTE:  For this counter, RELEASE COMPLETE messages that are
a reply to a previous RELEASE message and contain the same
cause value, are redundant (for counting purposes) and should
not be counted.

Context

MIB
WANSTATS-MIB
OID
.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.18
Type
column
Access
readonly
Status
current
Parent
wanAtmStatsEntry
Table
wanAtmStatsTable
Siblings
37

Syntax

SNMPv2-SMICounter64
Source
SNMPv2-SMICounter64
Base type
Unsigned64

Values & Constraints

Type Constraints
range: 0..18446744073709551615

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
wanAtmStatsIndex
The value of this object uniquely identifies this wanAtmStatsTable entry.
columnInteger32.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.1
wanAtmStatsSetupAttempts
This counter counts the number of call setup attempts (both successful and unsuccessful) detected on this interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.10
wanAtmStatsInRoutesUnavailable
This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message that contains one of…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.11
wanAtmStatsOutRoutesUnavailable
This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message that contains one of…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.12
wanAtmStatsInResourcesUnavailable
This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message that contains one of…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.13
wanAtmStatsOutResourcesUnavailable
This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message that contains one of…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.14
wanAtmStatsInUnsuccessfulCalls
This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message that contains one of…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.15
wanAtmStatsOutUnsuccessfulCalls
This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE mesg for the same call), ADD PARTY REJECT, or STATUS message that contains one of…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.16
wanAtmStatsInIncorrectMsgs
The Incorrect Messages Counter reflects any sort of incorrect information in a message. This includes: ? RELEASE, RELEASE COMPLETE, ADD PARTY REJECT, and STATUS…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.17
wanAtmStatsInPartyEvents
This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preced…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.19
wanAtmStatsDataSource
This object identifies the source of the data that this wanAtmStatsEntry analyzes. This source can be any interface on this device. in order to identify a particular interface, …
columnObjectIdentifier.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.2
wanAtmStatsOutPartyEvents
This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preced…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.20
wanAtmStatsInExpiries
The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. The conditions for incrementing this counter are: ? Expir…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.21
wanAtmStatsOutExpiries
The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. The conditions for incrementing this counter are: …
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.22
wanAtmStatsInRestartErrors
The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremented when receiving a RESTART message.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.23
wanAtmStatsOutRestartErrors
The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremented when transmitting a RESTART message.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.24
wanAtmStatsInSVCs
SVC VCCs established at this signaling entity for incoming connections.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.25
wanAtmStatsOutSVCs
SVC VCCs established at this signaling entity for outgoing connections.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.26
wanAtmStatsInOCDs
An out of cell delineation from far end of the link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.27
wanAtmStatsOutOCDs
An out of cell delineation from near end of the link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.28
wanAtmStatsInLOCs
A loss of cell delineation error from far end of the link. This is a persistent OCD condition.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.29
wanAtmStatsDropEvents
The total number of events in which frames were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of frames dropped; it is just t…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.3
wanAtmStatsOutLOCs
A loss of cell delineation error from near end of link. This is a persistent OCD condition.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.30
wanAtmStatsInLOFs
A loss of frame error from far end of link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.31
wanAtmStatsOutLOFs
A loss of frame error from near end of link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.32
wanAtmStatsInLOPs
A loss of pointer error from far end of link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.33
wanAtmStatsOutLOPs
A loss of pointer error from near end of link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.34
wanAtmStatsInLOSs
A loss of signal error from far end of link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.35
wanAtmStatsOutLOSs
A loss of signal error from near end of link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.36
wanAtmStatsOwner
The entity that configured this entry.
columnRMON-MIBOwnerString.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.37
wanAtmStatsStatus
The status of this wanAtmStatsTable entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.38
wanAtmStatsInCells
The total number of cells seen coming from the far end of the link including errored cells.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.4
wanAtmStatsOutCells
The total number of cells seen coming from the near end of the link including errored cells.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.5
wanAtmStatsInCLP1
The total number of cells with the CLP bit set seen coming from the far end of the link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.6
wanAtmStatsOutCLP1
The total number of cells with the CLP bit set seen coming from the near end of the link.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.7
wanAtmStatsConnectionEvents
This counter counts the sum of the following errors: 1) SSCOP Connection Disconnect Counter The abnormal occurrence of this event is characterized by the expiry of Timer_NO…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.8
wanAtmStatsErroredPDUs
This counter counts the sum of the following errors: 1) Invalid PDUs. These are defined in SSCOP and consist of PDUs with incorrect length (MAA-ERROR code U), undefined PDU…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.5.1.9