vrrpv3OperationsPriority
VRRPV3-MIB ·
.1.3.6.1.2.1.207.1.1.1.1.7
Object
column
r/w
Unsigned32
This object specifies the priority to be used for the
virtual router master election process; higher values
imply higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has
ceased to participate in VRRP, and a backup virtual
router should transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es) for VRRP over IPv4 and hence
is not settable.
Setting the values of this object to 0 or 255 should be
rejected by the agents implementing this MIB module.
For example, an SNMP agent would return 'badValue(3)'
when a user tries to set the values 0 or 255 for this
object.
Context
- MIB
- VRRPV3-MIB
- OID
.1.3.6.1.2.1.207.1.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vrrpv3OperationsEntry
- Table
- vrrpv3OperationsTable
- Siblings
- 12
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vrrpv3OperationsVrId This object contains the Virtual Router Identifier
(VRID). | column | Vrrpv3VrIdTC | .1.3.6.1.2.1.207.1.1.1.1.1 |
| vrrpv3OperationsPreemptMode Controls whether a higher priority virtual router will
preempt a lower priority master. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.207.1.1.1.1.10 |
| vrrpv3OperationsAcceptMode Controls whether a virtual router in master state
will accept packets addressed to the address owner's
IPv6 address as its own if it is not the IPv6 address
owner. Default is fal… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.207.1.1.1.1.11 |
| vrrpv3OperationsUpTime This value represents the amount of time, in
TimeTicks (hundredth of a second), since this virtual
router (i.e., the 'vrrpv3OperationsStatus')
transitioned out of 'initialize'. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.207.1.1.1.1.12 |
| vrrpv3OperationsRowStatus The RowStatus variable should be used in accordance to
installation and removal conventions for conceptual
rows.
To create a row in this table, a manager sets this
… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.207.1.1.1.1.13 |
| vrrpv3OperationsInetAddrType The IP address type of Vrrpv3OperationsEntry and
Vrrpv3AssociatedIpAddrEntry. This value determines
the type for vrrpv3OperationsMasterIpAddr,
vrrpv3OperationsPrimaryIpAddr, and
… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.207.1.1.1.1.2 |
| vrrpv3OperationsMasterIpAddr The master router's real IP address. The master router
would set this address to vrrpv3OperationsPrimaryIpAddr
while transitioning to master state. For backup
routers, this is t… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.207.1.1.1.1.3 |
| vrrpv3OperationsPrimaryIpAddr In the case where there is more than one IP
Address (associated IP addresses) for a given
'ifIndex', this object is used to specify the IP
address that will become the
vrrpv3Opera… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.207.1.1.1.1.4 |
| vrrpv3OperationsVirtualMacAddr The virtual MAC address of the virtual router.
Although this object can be derived from the
'vrrpv3OperationsVrId' object, it is defined so that it
is easily obtainable by a manag… | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.207.1.1.1.1.5 |
| vrrpv3OperationsStatus The current state of the virtual router. This object
has three defined values:
- 'initialize', which indicates that the
virtual router is waiting for a startup … | column | Enumeration | .1.3.6.1.2.1.207.1.1.1.1.6 |
| vrrpv3OperationsAddrCount The number of IP addresses that are associated with
this virtual router. This number is equal to the
number of rows in the vrrpv3AssociatedAddrTable that
correspond to a given if… | column | Integer32 | .1.3.6.1.2.1.207.1.1.1.1.8 |
| vrrpv3OperationsAdvInterval The time interval, in centiseconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements. | column | centiseconds Integer32 | .1.3.6.1.2.1.207.1.1.1.1.9 |